Red RC » Brand

June 27, 2023

Awesomatix Touring Car & 1:12 parts

Awesomatix has released new option parts for its Touring Car and 1:12 kits. For its A800 Touring Car platform are new P63-R Damper Pistons for use in D3 and D2.2 Dampers (D2.2 requires AT41-2 Damper Vanes). With a new improved design they give even better volume compensation and sealing of the dampers. These Pistons are made of special anti sticking rubber. The result is more smooth and consistent operating of the dampers. For their A12 1:12 chassis, they have added new 6 degree Alloy Steering Block Posts. With the use of these parts, the weight is reduced 2,3g/pcs compared to the std. steel ST1208/ST1207 steering post combination. ST1207 Steering Block Tubes are not needed with ST1208-C6AL use.

Source: Awesomatix [Facebook.com]

June 26, 2023

Bittydesign AR8-GT3 SWB 325mm 1:8 GT body

Italian body manufacturer Bittydesign has launched their third 1:8 GT bodyshell with the presentation of the all new AR8-GT3 SWB 325mm model. Making reference to the Audi GT3 supercar, they took inspiration to design the lines of the AR8-GT3 body shell adapted to the production needs. The latest body has a lowered front nose that generates excellent steering while the lowered cab and pronounced roof pillars stabilise the air flows that conveyed into the large rear wing that make the model easy to drive.

View more images

June 23, 2023

RC Maker Geocarbon Matte Setup Board V2

RC Maker has release the successor to their popular GeoCarbon Setup Board. The new V2 setup board features gorgeous 5mm Thick 6K Twill Matte Carbon Finish, which looks amazing in your pit are. It’s precision CNC machining with chamfered edges makes it very safe for handling and transport, the design making it less susceptible to being damaged in transit whilst maximising working space to set up your car. It features a precision CNC machined logo, which contrasts great with the setup board, giving it a clear but raw look. A massive feature of this board is the optional levelling with are available separately. The board comes with a recessed shape on the underside for inserting the optional levelling feet. These feet screw straight in, and allow the board to be levelled from above! For those wanting to get their board nice and flat for maximum setup accuracy, this is the ultimate. There’s also no need to disassemble them unless flying, and when the board could be under high stress, in which case it is recommend removing the threaded feet which is only a 1 minute job. They have also increased the size from the previous version, the new V2 features a 320mm width and 395mm length, which allows plenty of room for 1:12 and 1:10 Onroad & Offroad. It comes in a black bubble packaging bag which can be re-used.

View levelling feet here

June 22, 2023

Protoform Venturi GT 190mm body

Protoform has released the Venturi GT body, a new contender in the popular USGT class. Combining scale looks with performance on the track, the Venturi GT takes inspiration from a new wave of hypercars, featuring a low-CG, cab-forward design sure to provide exceptional handling characteristics while also looking stunning on the track. The super low-slung hood and raised wheel arches give the Venturi an aggressive GT-style aesthetic, while the deeply sculpted side panels provide superior side bite and overall body rigidity. The rear wing features two trim lines: a lower 10mm tall line for USGT-sanctioned racing, and a taller cut line for no-holds-barred club racing where extra rear downforce is needed. Fully approved for competition by USGT rules, Venturi GT is produced in high-quality clear polycarbonate, coming in at around 85-90g race-ready weight. A comprehensive decal sheet including windshield headers and number plates, wing mounting hardware, and paint-then-peel overspray film are all included.

View more images here

June 22, 2023

Picco P3TX .21 Buggy engine

Picco has introduced its newest .21 1:8 Offroad power unit with the release of the P3TX Buggy engine. The new version of the Italian manufacturers buggy line features a traditional 3+2 port cylinder with an updated CNC machining. Characterised by a Long Stroke layout and strong Swiss made 14mm Ceramic bearing for better reliability it also sports a new cooling head to improve heat dissipation and a head button with silicone seal to prevent dust and vibration. An Optional LCG (low-center-gravity) head to be used only below 10°C/50°F outside temperature is sold separately. Available with a DLC coated crankshaft to prevent any oxidation and any wear of the crankpin or with a Standard Steel crankshaft with a black-coating just to prevent oxidation. The P3TX 3,5cc engine is delivered with a 7,0mm and 7,5mm venturi.

View specs and more images here

June 22, 2023

Flash Point RC 1:8 Offroad Lexan 2 piece Rear Wing

New from Flash Point RC is this 1:8 Offroad Lexan 2 piece Rear Wing. The wing is produced from high-quality 1.5mm thick Lexan material and includes a smaller center wing for increased stability and traction. The FP Lexan wing is lightweight and provides great stability for highspeed corning and increased rotation in slower speed corner. The kit includes two complete wing sets in one package. The smaller central wing helps increase downforce while reinforcing the larger main wing. The side dams are both IFMAR and ROAR legal.

View set here

June 22, 2023

Ielasi Tuned Dirt R Evo .21 Buggy Engine

New from Italian engine tuner Ielasi Tuned is their Dirt R Evo .21 Buggy engine. Developed on the basis of the consolidated Dirt R, the new Dirt R Evo is a small upgrade compared to the previous model. These upgrade include a new low centre of gravity head (like that of the Dusty RCE) which weights in at 60 grams. Also new is the backplate and different timing of the crankshaft.

View more images here

June 21, 2023

OfficinaRC ‘Smart Body Tuck – Click Ball Connect’

OfficinaRC has released their new ‘Smart Body Tuck – Click Ball Connect’ body stiffener solution. In recent years, body stiffeners have become an almost essential accessory for those who want to use lightweight car bodies. These stiffeners, thanks to their reduced weight, allow ultralight bodies to maintain their aerodynamic shape while driving. OfficinaRC chose to call it “Smart” because it solves one of the most common issues associated with bodies featuring a Body Tuck: space. It is often challenging to stack these bodies. With the use of a carbon fibre rod with two aluminium balls at each end, attaching and removing the stiffeners, whether for stacking bodies or observing their performance on the track with or without stiffeners, will be a breeze. The two aluminium ball joints, made from black anodised aluminium, fit perfectly into the appendages. The appendages, 3D-printed using a resin mixture, ensure impeccable details and excellent resistance to removal and insertion. Each stiffener comes with numbered appendages (1 and 2) that allow you to choose which side to leave exposed for detachment. The Smart Body Tuck is incredibly lightweight, weighing only 1.45 grams per pair, and it comes with ultra-thin pre-cut 3M VHB adhesive for maximum adhesion. It fits on all touring cars, both for side stiffeners and rear wheel arches, and it is compatible with FWD bodies.

View more images here