Red RC » Brand

August 5, 2024

Yokomo MS1.0 Aluminium Steering Blocks

Yokomo has introduced the latest version of aluminium steering block for its MS1.0 1:10 Electric Touring Car. The re-designed shape is lightweight and uses flanged bearings to reduce excessive free-play and offer high accuracy and enhances response and traction, offering a superior alternative to plastic steering blocks. The set includes Aluminium hubs, Flanged bearings and Graphite steering plates. The aluminium steering blocks and graphite plates that are versatile and compatible with both front and rear, left and right positions.
View more images here

August 2, 2024

R1 Wurks DC1.2 Drag Car Kit

California based R1 Wurks has released the long-awaited successor to its original DC1 Drag Car kit with the introduction of the DC1.2. The new kit features all the latest parts and enhancements designed to give you the best performance gains possible from the chassis. Features of the new kit include an optimised carbon fibre chassis, drop-down wheelie bar bracket, Motor mount support and left side adjustable motor support wedge. It also includes an Adjustable Front Bumper, Aluminium gearbox with a 2.6 to 1 ratio and Drag race-specific CVA drive shafts.

View full features and more images here

August 1, 2024

Spower B7TT SPEED Factory Tuned .21 Racing Engine

Spower, the engine brand of chassis manufacturer Sworkz, has released it latest engine the B7TT SPEED Factory Tuned .21 Racing Engine. Produced by O.S. Engines in Japan, it is a long-stroke engine that offers quick response at low speeds and more torque in the mid end with consistent idling. The latest Spower B7TT SPEED piston/liner comes in a conventional 3-port configuration enabling smoother torque throughout the power range. The engine’s crankshaft has 2 tungsten counterweights contributing to a consistent idle and quick RPM response according to the throttle movements. The B7TT SPEED also has the latest technology rear thrust plate with surface treatment embedded in the cover plate. This is to reduce friction against the connecting rod and to extend its life. The crankcase of B7TT SPEED is redesigned with a new boost port and a new exhaust port for optimum air flow.

View Soecs & more images here

August 1, 2024

R1 Wurks B7 Lightweight Drivetrain Parts

R1 Wurks has released a number of lightweight drivetrain parts for the Team Associated RC10B7 1:10 2WD Buggy. Lightweight Rear CVA Axle offer the same durability as the stock components but with a lighter design. Weighing in at just 7.9grams for the pair, these CVA shafts are 26.85% lighter than the standard parts. Made from treated high-yield strength steel with exceptional elasticity and toughness. They are finished in a low friction, wear-resistant titanium nitride (TiN) coating. Also from the US manufacturer are Lightweight HD CVA 69mm Bones. Weighing in at 8.7grams for the pair, the optimised shaft diameter reduces weight and lowers rotational inertia, allowing for faster acceleration and deceleration. They also offer an Ultra-Lightweight version specifically for the 21.5 to 17.5 classes which weigh 7.2 grams (pair). Finally the lightweight range includes Lightweight Differential Outdrives which reduce weight over the stock part by almost 35%.

View more images here

August 1, 2024

RC Maker SP1 Electric Touring Car

After months of build up & high anticipation RC Maker has just released its first ever 1:10 Electric Touring Car, the SP1. A ground up development by top touring car racer and RC Maker founder, Ryan Maker, the release of the car realises a life long passion project for the popular Australian. With over 20 years in the hobby and 8 years in the design and manufacturing industry, Maker always dreamt of being able to develop his own car kits. This dream has been brought to reality over the past 2 years, with all of the design done in house as well as much of the manufacturing and prototyping. Presenting the SP1, a touring car that challenges established concepts with an ultra-low centre of gravity coil-over shock absorber design. The SP1 is designed for everybody. A car that is easy to drive straight out of the box, with great durability. The SP1 can be tuned for any drivers taste and any track condition through its vast range of setup options and option parts.

View Features & Images here

July 31, 2024

Infinity IF14-2MID 1:10 Electric Touring Car

Infinity has released a new ‘MID’ version of its IF14-2 1:10 Electric Touring Car. Developed through numerous tests in actual races from the 2023 JMRCA All Japan Championship to the 2024 TITC, the basic structure of the MID’s suspension and drivetrain is inherited from the IF14-2 Team Edition. By equalising the front and rear drive belts and positioning the spur gear near the centre of the wheelbase, the weight distribution front and rear has been significantly altered. In addition to the stability of the IF14-2, it has evolved into a faster cornering car. The main spare parts and optional parts are compatible with the IF14-2. While the conventional split-type suspension holder allowed for fine setting changes, it had drawbacks such as increased weight and complexity in settings. In the IF14-2 MID kit the front and rear suspension blocks are integrated, helping simplify assembly and setup tuning. This style offers easier maintenance allowing you to enjoy more time on track. It is also possible to use the traditional split-type suspension blocks as an option.

View more images here

July 31, 2024

D’angelo joins Capricorn

Capricorn has announced that leading international 1:8 GT racer Alex D’angelo has joined its team. The Italian makes the move from another of Italy’s chassis mnufacturers Genius Racing with who he claimed the TQ honours at the 1:8 GT World Championship in Australia last year as well as securing the highly competitive Italian Nitro GT National Championship title. On the announcement D’angelo posted, ‘Excited to announce I will be joining Team Capricorn. Thank you Patrizio for wanting me so much on your team, I can’t wait to get on the track with the new LAB GT2 GP & EP and more. Feeling ready and motivated for the challenges ahead. See you on track!’. With Capricorn producing chassis for a number of racing categories and set to release its first Large Scale, we expect D’angelo to play a roll in the development of that new project.

Source: Capricorn [capricornrc.com]

July 31, 2024

Axon TC10/3 Aluminium Chassis Kit & option parts

Japanese manufacturer Axon has announced it is to offer its TC10/3 1:10 Electric Touring Car as an Aluminium Chassis Kit while also releasing new option parts for the platform. The TC10/3 Aluminium Chassis Kit (Photo is team driver Akio Sobue’s Alu race car) features a high-rigidity aluminium chassis that enhances the overall rigidity of the car while providing adequate chassis flex. This achieves well-balanced driving performance and boasts excellent driving feel on carpet surfaces and high stability on asphalt tracks. Already being used by Sobue, the new options for the TC10/3, which was launched last November, include an Aluminium Body Stopper which attaches to the front knuckle arm to stabilise the front end of the body, improving stability in high-speed corners. There is also a new Aluminium Rear T-Brace chassis stiffener that enhances the rigidity of the rear section. Using the aluminium rear T-brace improves rear grip and achieves high cornering speed. Carbon Knuckle Arms provides a milder driving feel and improves ride quality over road gaps. Finally Axon has added a 3g Chassis Weight for adjusting load transfer during driving.

View option parts on Sobue’s car here