Red RC » Brand

February 14, 2019

JConcepts foam adhesive body washers

Coming from JConcepts is a 12-piece set of foam washers for 1/10th scale body shells. They help protecting the area where initial damage starts to occur which is right around the body mount holes. The die-cut foam donut is adhesive backed to attach itself to the body and the foam cushions the landings from there. The soft but high-impact material allows some flexibility between the body and the setting distance to the mount protecting the paint from the inside out.

View another image here

February 14, 2019

Infinity IF15 adjustable front oneway set

Reigning 1/10th 200mm World Champions Infinity have released an adjustable front oneway set for their title-winning IF15. The set offers a different approach to the traditional style of one way unit. By combining a typical one way with a silicone oil filled housing, drivers are able to adjust their car’s cornering and brake feeling while gaining the benefits of using a one way. The Adjustable Front Adjustable Oneway Set requires 1,000,000 to 2,000,000 silicone oil and rubber based or silicone seal adhesive for assembly.

View more images here

February 14, 2019

RC Maker touring car floating electronics plates

RC Maker have introduced their new adjustable electronics mounting plates for most of today’s 1/10th electric touring cars. The floating brass mount with central attachment allows for fully floating electronics with absolutely minimal flex interference, giving symmetrical flex, which is not possible in conventional layouts. The plates make it incredibly easy to swap chassis plates, as electronics stay fixed to the plate, making it only two screws to swap all electronics over, without messing with tape. The unique design is making it very easy to swap between chassis manufacturers and try different plates all without having to buy entire new kits while offering left-to-right chassis balance adjustment. Different fastening inserts allow for even greater versatility without the need to buy a whole new set again. Same with changing to different plates and centre weights, they are all compatible with each-other. Beside the double-sided design, RC Maker also offers a single sided set with 4mm of adjustability left and right to adjust the balance bias of the car. Used for the electronics only it allows to tune the chassis balance, and also move weight in or out both sides to adjust the amount of roll in the chassis depending on the traction level. In addition to the brass double and single-sided sets, RC Maker also offer the brass plates separately to conversion double into single and single into double-sided designs. Optional carbon fibre option plates make for reduced overall mass if needed while an optional +10g centre weight adds further weight tuning options. Supported cars include the Yokomo BD8 and BD9, Xray T4 2017 to 2019, Team Associated TC7.1 and TC7.2, Tamiya TRF419X, Awesomatix A800X, Infinity IF14, Xpress XQ1, Mugen MTC1 and ARC R11’19.

View more images here

February 14, 2019

Zero Tribe BD9 stock conversion kit

Zero Tribe have introduced a stock conversion kit for the Yokomo BD9 that was developed to reduce natural drivetrain drag. Based on the experience gained with the T4 stock conversion kit, the BD9-aimed variant features a larger 22T centre pulley design for less belt pinching and thus a more efficient drivetrain. Included in the kit are also the necessary, longer front and rear belts as well as a redesigned narrow design 2.0mm carbon fibre top deck that will improve overall grip and traction in lower grip track conditions or when running hard compound handout or spec tyres. The upper deck is also available separately for the standard BD9.

View the narrow top deck here

February 14, 2019

MIP Demon G2/G1R front R-CVD driveline kit

Coming from MIP and made for the Cross RC Demon G2, and G1R updated vehicles, is the R-CVD driveline kit. Made of alloy steel, the fully US-made kit it designed to deliver top performance and longer lasting parts. The kit allows to turn the tyres to a true to 46 Degree angle with no binding; resulting in top performance and reliability thanks to utilising a unique mechanical stop between the axle and bone where they will bottom out before the cross pin, safeguarding the cross pin from breakage leading to a longer lasting parts. The upgrade kit fits any Cross RC Demon with a G2 or G1R axle upgrade and does not require any type of modification. This kit also utilises MIP HD driveline couplings, allowing for easy rebuilds.

View another image here

February 14, 2019

Azarashi Type-MCR 210mm wheelbase body shell

Azarashi have introduced their new Type-MCR body shell for 210mm M-type on-road cars. Formerly made by North Craft, the limited edition body is the comical recreation of a 1990’s endurance GT race car and it first most 210mm wheelbase M-chassis cars such as the ones from Tamiya. The body comes including decals and wing mounting hardware.

View another image here

February 13, 2019

Redcat Gen8 P-A-C-K pre-assembled chassis kit

Redcat Racing have introduced the new Gen8 P-A-C-K pre-assembled chassis kit for those who want to run the Gen8 chassis with their own choice of electronics, wheels, tires, and body. The Gen8 PACK already includes many of the features custom builders look for, and is ready to be transformed into a high performance, one of a kind, custom rig. The Gen8 PACK uses the same chassis as the Gen8 International Scout II RTR vehicle and it also shares the same stock chassis components such as C-channel frame rails, low centre of gravity battery tray, centrally mounted divorced transfer case, lockable slipper clutch, portal axles with metal gear covers, MOD-1 gears, machined aluminium spools, front CVAs, 32 rubber-sealed ball bearings, threaded aluminium shocks, 47 degree steering blocks with proper Ackerman, Panhard bar, LED-ready bumpers, winch-ready front bumper, and frame mounted floor pans. The Gen8 uses portal axles with 47 degree of steering to help the vehicle manoeuvre in tight spaces.

Continue reading here

February 13, 2019

Awesomatix roll out new A800 optionals

Coming from Awesomatix are three new option parts for the A800 series of touring cars. First up is the C01B-XAH2LA 2.0mm aluminium chassis that offers additional holes for the +8mm and +9mm arms. Machined from high-quality 7075-T6 material the chassis also sports updated cutouts to offer increased response and a better steering feeling while upping higher corner speeds at the same time. Next up are the AM19-2US mounts that offer the exact same geometry as the AM19-2 parts. However they are machined from 3mm 7075-T6 alloy, meaning they are 0.5mm thicker than the AM19-2. To keep the same roll centre settings, owners need to run 0.5mm thinner shims under ST24 ball studs. Last but not least come the AM06WL-US uprights. They mimic the AM06WL parts but lack the flex cut out, making them more durable. Generally with all of the new “US” parts, these are recommended for the use on US-style tracks with hard boards and barriers as they add a bit of durability on the expense of a slightly higher weight.

View the other new parts here