Red RC » Pro Line

May 19, 2020

Pro-Line Prism T 2.2” stadium truck front tyre

Made for 1/10th scale stadium trucks is Pro-Line’s Prism T 2.2” carpet and astro turf front tyre. The Prism features tons of ultra-sharp prism-shaped pins in the middle of the tyre combined with wedge style pins on the outside for exceptional steering on small and tight carpet tracks without the edgy feel of full pin tyres. The pins on the Prism have been positioned with the knife edge pointed front to back and side to side for maximum grip and to stay sharp even as they wear down. The Prism T front perfectly pairs with Pro-Line’s Prism T rear tyre for ideal carpet racing performance. The tyre comes including open cell inserts and in Z3 medium and Z4 soft carpet-specific compounds.

Source: Pro-Line [prolineracing.com]

May 19, 2020

Pro-Line 1967 Ford F-100 Race Truck body shell

Pro-Line Racing have announced the soon release of their 1967 Ford F-100 race truck body shell for 1/10th short course trucks. The clear body is pre-cut for easy installation and can be fully customised with whatever paint job desired. The 1967 Ford body features the iconic flat front F-100 grill and wide fender flares to represent the aggressive fiberglass bulges found on full-size race trucks. Included with the clear body shell comes a detailed decal sheet.

View more images here

May 19, 2020

Pro-Line Mach 10 black 10-spoke wheel

Pro-Line have introduced their new Mach 10 black wheel for 1/8th scale buggies. The Mach 10 features ten aggressive spokes that will make any off-road bash buggy look fast even sitting still. Designed with the same overall size and strength as our full-race Velocity wheels, the Mach 10 wheels are capable of taking a beating and coming back for more. The Mach 10 wheels have a 17mm hex and are made from a single moulded piece of high-quality Nylon proudly produced by Pro-Line in the USA. These wheels will work with any of Pro-Line’s 1/8th buggy tyres, whether they are meant of tearing up the local bash spot or winning World Championships.

View more images here

May 19, 2020

Pro-Line ’70s Rock Van body shells

Following a couple of teaser images Pro-Line have fully unveiled their new ‘70s Rock Van trail truck body shells. Based on the iconic vans of the mid-late 1970s, the Rock Van provides a blank canvas to recreate the most awesome vans of yesteryear. From cable news vans, to ice cream trucks, to overlanding rigs, to transporting around your favourite team of ex-US Special Forces: the possibilities are endless! The ‘70s Rock Van features super-detailed front grille sections, oversized fender flares, and two sets of add-on bubble windows, porthole and teardrop, to give the van the ultimate retro look. The decal sheet also includes a full set of yellow and orange pinstriping. The body fits all popular 12.3” wheelbase crawlers outfitted with two sets of tall body posts. Pro-Line is also offering some exclusive 3D bonus scale parts, available for download, free of charge. The 3D files can be used to print-at-home on your 3D printer or send to an online print shop. The Rock Van is moulded in durable .060″ polycarbonate and comes with window masks, paint-then-peel overspray film and decals to finish off the look.

Continue reading here

May 12, 2020

Pro-Line Rock Van crawler body shell – Coming soon

Pro-Line have released a teaser image of their forthcoming all-new Rock Van trail truck body shell. No official information is available yet beside the teaser image, that first appeared on social media, but the 1970’s style body is believed to fit most standard wheelbase crawlers on the market. Full details are expected to surface soon.

Source: Pro-Line [prolineracing.com]

April 21, 2020

Pro-Line pre-painted Fusion SC & MT truck body shell

Pro—Line have introduced their new pre-cut and pre-painted Flo-Tek Fusion and Monster Fusion body truck body shells. Starting with the Flo-Tek Fusion, the body comes completely pre-painted in black with detailed wrap decals and it is pre-cut to get racers going even faster. To finish the body just install the decals and put in the body post holes and go. The Fusion wrap decals are pre-cut and feature Pro-Line blue speed lines that will make the truck stand out from the rest. The polycarbonate is made from black material, so owners never have to worry about paint peeling or chipping off. Realistic window stickers are also included. The Fusion features large vent holes in the front, middle and rear of the body for maximum protection against parachuting and the most important holes have been cut out already. The Flo-Tek Fusion retains the aggressive fender flares and front grill from the original Flo-Tek that everyone loves. The rear end was inspired by the EVO with large openings everywhere and ideal body mounting positions for the wide variety of trucks on the market. The Fusion body also includes roof vents to make it the best jumping body available and kick-ups on the roof and rear fenders to keep the truck glued to the track. The body fits most 1/10th scale 2WD and 4WD short course trucks.

Continue reading here

March 20, 2020

Pro-Line introduce new pre-mounted SC tyres

Coming from Pro-Line are four new pre-mounted 1/10th short course tyres on the Raid removable hex 2.2”/3.0” wheel. The range will include the Badlands SC, Trencher X SC, Sling Shot SC and Street Fighter SC tyres all of which come mounted on the new Raid removable hex wheel that allows to easily change the offset of the wheel to fit different applications by simply changing out the hex. The wheels include a pair of 12mm Slash 4×4 front/rear and Slash 2WD rear hexes as well as a pair of 12mm Slash 2WD front hexes that fit the most popular trucks. Optional 14mm, 17mm and ProTrac offset 12mm hexes are available separately to fit other applications. The pre-mounted tyres come as pair and including closed cell inserts.

View the other new tyres here

March 19, 2020

Pro-Line UDR 1967 Ford F-100 Heatwave Edition body

Pro-Line have introduced their new pre-cut and pre-painted 1967 Ford F-100 Heatwave Edition body shell for the Traxxas Unlimited Desert Racer. The body allows UDR owners to build a fully licensed replica of the popular full-size Heatwave Trophy Truck driven by Chris Isenhouer. The massive black and gold Heatwave decal wrap is also included and pre-cut for easy installation. The body features the iconic flat front F-100 grill and wide fender flares to represent the aggressive fiberglass bulges found on Chris’ full-size race truck. Pro-Line’s 1967 F-100 Heatwave Edition body mounts directly to the cage on the UDR in the same locations as the stock body, so all owners need to do is remove the outer film, place the wrap following the included instructions, and install the body just like they would the stock body.

View more images here