Red RC » Pro Line

April 16, 2009

Pro-Line Caliber & Suburb tires

New from Pro-Line are the Caliber 1/8th scale buggy tire and the Suburbs for 1/10th scale trucks. The Caliber’s step-pin technology collides with small pin technology to bring you a tire tread that is versatile and long-lasting. The small top pin is good for light to heavy loose dirt, while the base pin works great on hard-packed/blue-groove surfaces. Available in XTR, M2 and M3 compounds. The Suburbs are now available for 1/10 truck owners in M3 and new MX compounds and feature an inner and outer radius rib tread for increased corner holding and predictable side-bite. The internal carcass webbing resist tire expansion under acceleration and deceleration, while the internal sidewall ribbing maintains sidewall structure in extreme traction conditions for greater corner control. Tread height is predictable, aggressive, and long-lasting for use on a variety of blue-groove, and surfaces where you would typically run soft compound tires.

Click here to see the Suburbs

April 2, 2009

Pro-Line Losi 8ight 2.0 Shift bodies

Pro Line have shifted their attention to re styling the body shells on the Losi 8ight 2.0 series of buggy and truggy, with their new Shift shells. Both feature super-low styling to give your Losi 8ight 2.0 the lowest center of gravity (CG) possible and they have been fabricated to fit snugly around each chassis component. Made from durable / genuine .040 Lexan, they come supplied with a Shift decal sheet, window masks and their Paint-then-peel overspray film.

Click here to see the truggy body shell

February 17, 2009

Pro-Line Flat Bill FlexFit hat

Get in-style with the latest ’09 apparel from Pro-Line. Pro-Line introduces it’s first flat bill hat for all you trend setters out there. It’s Flexfit quality and styling so you know it’s going to fit your mug perfect every time you put it on. Featuring the new, ’09 Pro-Line embroidered logo front and rear, they are available in black, red and dark navy.

Source: Pro Line [prolineracing.com]

January 25, 2009

The weapon of choice? Pro-Line Revolver 1/8 Off-Road Tyres

How much influence do tyres have on the handling of a racing car? 30 percent? 60 percent? Up to 75 percent and more, according to chassis designers and Pro drivers alike. That’s why tyre choice is so critical on the cars overall performance and the reason why so many different companies all over the world offer tons and tons of different treads, compounds and even rims. All of them want to produce THE tyre. One of the most proactive manufacturers in the game is Pro-Line Racing based in sunny California, USA. Products like the Knuckles 2.0, Bow-Tie and Crimefighter are backed with wins at IFMAR World Championships and countless national and international titles. The newest addition to their range is the Revolver tyre and once again it is a true winner although it was released only a couple of days before the 2008 1/8 off-road World Championship in North Carolina after a very short development time.

Read the full review here

January 16, 2009

Pro-Line Carnage Desert Rat for Slash

Anyone who has ever watch CORR series racing knows that the cars tend to look rather 2nd hand after some close racing. Pro-Line have recognized this and have released a World’s first, an RC body with breakaway panels. The Carnage Desert Rat is the usual good looking offering from Pro-Line but the front and rear fenders can come off when impacted, adding to the scale realism. Simply install the included 3M® lock material and your ready to rumble again, and again, and again. Made from durable/genuine .060 Lexan, it is supplied with decal sheet, window masks and paint-then-peel over spray film. Check out the small video on their site by following the link below.

Click here for more pictures… content

January 16, 2009

Pro-Line Shift for Hot Bodies D8

Another body shell for the World Champion Hot Bodies D8, with Pro-Line releasing their offering, the Shift. Featuring super-low styling, it gives your D8 the lowest center of gravity possible, while it has been fabricated to fit snugly around each chassis component. Made from durable/genuine .040 Lexan, it is supplied with decal sheet, window masks and paint-then-peel overspray film.

Click more to see other photos… content

December 16, 2008

Pro-Line Revolver & Bow Tie pre mounts

Pro-Line have released their latest buggy tire range as pre mounts. Tires to get the pre mount treatment are the World Champion Revolver, Revolver V3 and Bow-Tie V3. All are available pre glued to white or yellow dish wheels and come in M2 and M3 compounds.

Source: Pro-Line [prolineracing.com]

November 19, 2008

Pro-Line Pit bag and Tools

Pro-Line have released some more new items, including this new pit bag, which is made to resist wear and endure all those trips to and from the track and beyond. The cover itself is made from a durable nylon, while corrugated plastic storage boxes keep your stuff secure and resist tearing and warping under the most extreme conditions. Each storage box includes an injection molded plastic handle insert and injection molded leading edge insert for easy sliding in and out of each box. Internal storage includes one extra-large compartment is at the top of the bag, one large compartment is located in the middle of the bag, and two medium compartments are located at the base of the bag. A retractable handle slides in-and-out for easy towing of your bag and heavy-duty wheels are located on the opposite side for effortless ease of towing as well. Also new is company’s range of tools, super durable, the tips are made from high strength steel and finished off with a titanium color finish. The handles are made of lightweight aluminium and are complete with a hard anodized finish. Available in a wide range of tip sizes and are sold individually or in kits.

Click here to see more product photos… content