Red RC » Products

March 3, 2017

Trion 6000mAh LiHV LiPo battery pack

Trion have introduced their new 6000mAh LiHV standard-size battery pack. Made from high-quality 100C high-voltage Lithium-Polymer cells the battery is of standard 138x47x25.1mm dimensions and it weighs in at 274g for the 4mm connector variant and at 280g equipped with 5mm connectors. Although being a HV battery pack with a nominal voltage of 7.6V, allowing to use it with a charge end voltage of 8.7V, it is also good for the use with standard charge settings and 8.4V charge end voltage as it offers a flat discharge curve for more power towards the end of a run.

View the 5mm connector variant of the pack here

March 3, 2017

Schelle Racing Innovations B6 Extreme 5mm gull tower

Coming from Schelle Racing Innovations and made for gull wing front arm equipped Team Associated B6 buggies is the Extreme front shock tower. Made from premium 5mm carbon fibre and offering an updated design with the outer two shock mounting holes removed and sporting shortened ears, the tower has reduced leverage, adding toughness during hard racing action. Optional holes for the Schelle upper wing mount add versatility and help to fine-tune the aerodynamic performance.

Source: Schelle Racing Innovations [schelleracing.com]

March 3, 2017

Team Magic E5-series 12mm & 14mm hex adapters

HRC Distribution have introduced several hex wheel adapters for the Team Magic E5-series of monster trucks. Machined from 7075 aluminium and sporting a clamping design the adapters are available as 12mm and 14mm variant to allow mounting Team Magic and also after market wheels. The 14mm adapters are a direct replacement for the stock parts while the smaller 12mm variants allow the use of other brand’s wheels. The hex adapters come in sets of four and in silver or black colour.

View the other adapter sets here

March 2, 2017

Procircuit Sprinter 1/8th buggy tyre

Next in the line of Procircuit’s revamped series of 1/8th buggy tyres is the Sprinter. An evolution of the popular Road Runner, the tyre features a distinctive split block tread that will give a consistent handling on a variety of surfaces including bumpy and loose outdoor tracks. The tyre comes pre-glued on yellow dish rims, including XL inserts and in the three compounds of super soft, soft and medium.

Source: Modelix Racing [modelixracing.com]

March 2, 2017

Capricorn C-03 updated rear upper suspension arms

Italian company Capricorn have introduced new rear upper suspension arms for the C-03 nitro kit. Keeping the same geometry as the old-style parts the new items utilise a 4mm turnbuckle, greatly improving durability and reliability. In addition the turnbuckles are also more user friendly as they now take a 2mm hex driver for adjustment over the more delicate 1.5mm tool that was required with the old design.

Source: Capricorn [capricornrc.com]

March 2, 2017

JConcepts Finnisher MBX-7TR body & XB2 gear shield

JConcepts have introduced the Finnisher body shell for the Mugen MBX-7TR as well as a 3-D-printed gear shield for laydown transmission equipped Xray XB2 buggies. Starting with the body, the popular and ROAR nationals winning Finnisher design is now also available for Mugen’s MBX-7TR truck. The slight cab forward design with a raked windshield makes the truck stand out as does the large centre fin which adds stability at high speeds. The Finnisher has a built-in air escape passage on the roof which allows the customer to fine-tune the body for maximum performance the included champion rear name plates provide additional high-speed stability and improved positioning of the rear bed rails to strengthen the assembly. Overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body.

Continue reading here

March 2, 2017

Serpent Viper 977-E Evo2 aluminium chassis plate

Serpent’s 977-E Evo2 aluminium main chassis plate is now also available as an option part for the 977-E Evo1. Machined from 5mm 7075-T6 aluminium and coming with some heavy machining to allow for ultra-low mounting of all components, the chassis is usable on the Evo1, allowing to run the older spec car with optional narrow rear suspension mounts as well as a narrow front end.

View another image here

March 2, 2017

BK Servo DS-S-HT ultra high torque servo

BK Servo, known for their helicopter servos, are making a step into RC car racing by introducing the DS-S-HT ultra high torque servo. Offering a whooping 40.8kg-cm of torque at 8.4V input and a speed of down to 0.10s, the servo is ideal for demanding 1/8th off-road classes. It also features a machined all-alloy case with heatsink middle section, steel gears, and a coreless motor. The servo is set for a release in mid-March.

View the specifications here