Red RC » Products

September 25, 2015

AKA premium race socks

Caps, shirts and hoodies printed all over with your choice of RC brands are so “2014” – instead you can now show your passion to your favourite brand with the new AKA race socks. The premium socks provide a compression fit, performance ribbing, enhanced ventilation and a reduced friction profile. Made exclusively for AKA from the premium SGX line by Sock Guy. These thin socks are ideal for high performance sports such as cycling or running, but will get your through your long main in comfort or keep you on top of your turn marshaling game. Pairs are sold in your choice of S/M (US size 5-9) or L/XL(US size 9-13) sizes. They are made in the USA and available exclusively here.

View more photos here

September 25, 2015

SMC YZ-2 brass weight kits

Coming from SMC and made for the Yokomo YZ-2 2WD buggy are two brass weights in the form of front rear pivot plate and the front motor plate brace. Designed to adapt the car to lower bite conditions the brass weights will make for a less aggressive forward weight distribution by adding weight to the rear end without harming the buggy’s mid corner speed. The front rear pivot was designed to take up all the space between the transmission and the motor while still providing critical anti-squat clearance with or without the kit shim. SMC pushed the block into all the nooks and crannies they could and not simply copied the design of the standard part with this resulting in a whopping 68g or rearward weight shift. The front motor plate brace in the kit is a small aluminium L brace, but the new part filled up the space under the waterfall as much as possible. Full motor displacement is still available, as well as clearance for the rubber pad under the brace with the motor plate attachment hole is still usable too. The motor brace place weighs in at 34g and the two parts are available separately or as combo kit.

View another image here

September 24, 2015

Serpent Spyder SRX4 2.5mm aluminium chassis

Serpent have introduced a 2.5mm aluminium chassis for the SRX4 4WD buggy. Made to replace the standard carbon fibre part the alloy chassis will improve rigidity and stability as it is less flexible compared to the carbon chassis. Excessive machining of the 7075-T6 part reduces the weight to 120g while the hard-coated surfaces reduces wear even on abrasive surfaces. With the chassis being stiffer it is best used on high-traction surfaces such as carpet and astro turf.

Source: Serpent [serpent.com]

September 24, 2015

Tekno RC shock/ball end tool & updated sway bars

Tekno RC have introduced a couple of new parts in the form of a multi-purpose shock and ball end tool as well as updated sway bars for the company’s 1/8th and 1/10th vehicles. Starting with the shock tool, it incorporates many useful features as it can hold 3mm to 4mm shock shafts and there are also 12mm shock bottom cap and 17mm shock bottom and top cap hex holding areas that are very useful for shock rebuilds. The tool comes CNC crafted out of high grade aluminium and it is anodised in a two tone black/grey finish.

Continue reading here

September 23, 2015

Serpent 977 one-way front axle & lightweight outdrives

Serpent now have the one-way front axle body for the 977 1/8th on-road car available in a hard-anodised and also a black colour version. The hard anodising makes the axle body more durable and both variants will come pre-assembled with high-quality German-made one-way bearings. Also new are lightweight one-way outdrives. Additional machining scrubs some weight, resulting in reduced rotation mass and overall weight.

View the other new parts here

September 23, 2015

Fenix 1/10th formula gear differential

Fenix have issued a first image of their forthcoming gear differential for 1/10th formula cars. Coming for 6mm and 1/4″ rear axles the diff is designed to replace the standard ball differential as found on pretty much every formula kit out there. Offering a ball-raced and very narrow design the diff will allow for some fine-tuning using different greases from what is understood. A definite release date is not set yet but according to Fenix the diff, that is on show on the forthcoming Hobby Model Expo in Milan, will become available by the end of the year.

Source: Fenix [fenix-racing.com]

September 23, 2015

Corally reveals World GT car kit

Team Corally have released first renderings of their forthcoming 1/10th scale World GT pan car kit. The vehicle is of a pretty basic design but the front end allowing for independent roll centre adjustments by raising or lowering the lower A-arms or upper arm mounts while the rear motor pod is obviously of a rail-type design for step-less axle height adjustments. The pretty wide chassis seems to take both standard length and shorty battery packs. More information and images should become available in time for the release.

View more photos here

September 23, 2015

Tesla nitro on-road pinion gear remover set

Capricorn have a new pinion gear remover tool for 1/8th and 1/10th scale nitro on-road cars available. Usable with M1.0 and M0.8 pitch gears the black anodised aluminium tool allows for save and convenient gear removal on cars such as the ones of Carpricorn, ARC, Mugen, Serpent, Shepherd and Xray.

Source: Capricorn [capricornrc.com]