Red RC » Products

September 4, 2013

Yeah Racing TT02 suspension & drivetrain option parts

Yeah Racing have new option parts for Tamiya’s TT02 touring car available in the form of rear lower aluminium A-arms, aluminium lower suspension mounts and universal driveshafts. Starting with the rear lower arms, they are made from high-quality aluminium and designed to reduce unwanted suspension flex and therefore add precision to this vital part of any RC car. They make for a smoother and more linear suspension movement and include new outer hinge pins and mounting hardware. Also new are lower aluminium suspension mounts. Again designed to reduce flex, increase precision and add durability the blue anodised parts are a drop fit solution and ideally used with the aforementioned A-arms. Last but not least come universal steel driveshafts for the TT02. They replace the kit’s plastic arrangement and make for a longer lasting and more efficient power transfer. The joint shaft’s cross pin is kept in place by a ring lock and the driveshafts are usable on both the front and rear of the chassis.

Click here to view the other new parts

September 4, 2013

Xray NT1 front and rear bulkheads

Xray have new front and rear bulkheads for the NT1 200mm nitro touring car available. They are made from a new, harder material and ideal when racing in high ambient temperatures or on high-traction surfaces. The front bulkheads were redesigned to accommodate the new front wire anti-roll bar system. The rear upper camber link position on the bulkhead clamp has been provided to increase stability and is recommended for use in very high-traction conditions or when using large-diameter tires in order to help prevent traction rolling. The super-lightweight bulkheads have a very clean and lightweight design and a special composite mixture was developed to allow repetitive assembly and disassembly without stressing or wearing out the parts. All four bulkheads are available as separate items.

Click here to view another photo

September 4, 2013

Schumacher pre-cut touring car rear wings

Schumacher announce the introduction of new pre-cut touring car wings. Available in clear, black or with a carbon look the wings do away with the often fiddly need to cut and dremel a usable wing out of the sets supplied with body shells. They are a simple bolt on and go racing item, come including end plates and mounting tape and they meet both EFRA and BRCA regulations.

Click here to view more photos

September 4, 2013

Exotek RB6 alloy C-hubs & mid motor rear bulkhead

Exotek have new aluminium option parts for the Kyosho RB6 buggy available in the form of C-hubs and a mid motor rear bulkhead. Starting with the castor hubs, the parts are CNC-machined from 7075 aluminium and come anodised in Kyosho factory red colour. They weight in at 7g per set and are much stronger than the stock plastic hubs. The second new part is the mid motor rear bulkhead, again machined from 7075 aluminium. Coming red or black anodised the part is machined to weight just 12g while offering exceptional durability at the same time. The bulkhead works both with the stock plastic and Exotek’s optional carbon fibre shock tower.

Click here to view more photos

September 4, 2013

Team Titan Blitz TS02E 200mm on-road body

Team Titan have a new on-road body available in the form of the TS02E. Designed for 200mm converted electric touring cars it features a triple wing design for added stability and performance. It comes as regular weight 1.0mm or lightweight 0.8mm version and both include window masks, decals, body stiffener parts and a rear wing.

Click here to view another photo

September 3, 2013

JConcepts RB6/RT6 honeycomb motor mount

Following variants for Team Associated and TLR off-road vehicles JConcepts now release the honeycomb motor mount for Kyosho RB6 and RT6 kits. Machined from 3mm aluminium the motor plate features a special design to increase stiffness compared to conventional slotted heatsink motor mounts while still being light of weight thanks to numerous milled-out pockets. The motor mount is a direct replacement and available in blue or black colour.

Click here to view the black colour variant

September 3, 2013

Protoform Better Edge sanding block

Better Edge sanding block

Protoform introduce the Better Edge sanding block made from injection moulded nylon and covered with a strip of 120-grit sand paper. Designed to smooth out scissor imperfections along the bottom edges or rear wing of on-road and off-road bodies, the block also features two different diameter rounded ends for wheel wheels or suspension cut outs. It can also be used to sand parts and tyres. Each block includes a form-fitted strip of sand paper fastened to the block with a low-profile hook-and-loop system. A spare strip is included and replacement strips are available in 2-packs.

Click here to view more photos

September 3, 2013

Serpent Spyder SRX-2 rear motor buggy

Serpent soon have the Spyder SRX-2 rear motor 2WD buggy available. The Billy Easton designed buggy features a composite fibre chassis, super-tough suspension components, big bore shock absorbers and carbon fibre shock towers. It is designed as pure rear motor buggy to make sure no compromises needed to be made while creating the platform. In October the kit will become available also as a dedicated mid motor version for indoor and high traction tracks followed by the Spyder SCT RM 2WD short course truck. More information together with detail and body-off images are available soon.

Click here to view the features and more photos