Red RC » Products

March 7, 2013

Mitch and Hollis win at Bigfoot Extravaganza

The 11th annual Bigfoot race held at Mikes Hobby Shop in Carrollton, TX, attracted racers from all over the country and with a total entry count of 247, it was the largest to date. JConcepts Team drivers JR Mitch and Cody Hollis were spectacular all weekend and with support from teammates Mike Stoll, Trevor Nault, Aaron Reynolds and Taylor Larsen, the team had the equipment to beat at Mike’s famous track surface. JR Mitch got things started by TQ’ing the 2wd SCT modified class and 2wd modified buggy class with the Pressure Points tires in green compound. Cody Hollis kept things rolling in the Racing Truck class by getting the TQ with his TLR 22-T also rocking the Pressure Points in green compound. The tricky conditions which relied on incredible forward bite but a slight amount of rotation to get all the corner speed possible out of the vehicles. Some drivers struggled to adapt, but JR and Cody had done their homework in years prior and returned to the annual event for a 3rd time, their previous experiences at the Bigfoot paid off and both JR and Cody were on point.

Click here to continue reading

March 7, 2013

Yeah Racing 2-in-1 on-road gauge

Yeah Racing introduce a 2 in 1 ride height and droop gauge for the use with 1/12th and 1/10th on-road chassis. The gauge is designed to measure the chassis’ ride height from 3.6mm to 8mm in 0.2mm increments and the suspension droop from 2mm to 9.2mm. The tool machined from aluminium and is available in black or blue colour.

Source: Yeah Racing [yeahracing.com]

March 7, 2013

Hiro Seiko aluminium & titanium screw sets

Hiro Seiko introduce new lightweight screw kits for Xray, Tamiya, Hot Bodies and Yokomo touring cars. Available are aluminium and titanium combo as well as pure titanium sets that are made to lower the overall weight of the chassis while creating cool looks and give added rigidity. Available for the Xray T4, Tamiya TRF415 V5, Hot Bodies TCXX and Yokomo BD7 the aluminium and titan combo sets save between 17 and 28g with the Ti only sets saving you 12 to 20g.

Click here to view the other screw sets

March 7, 2013

2013 A Main Hobbies Outback Shootout – report

The 4th Annual Outback Shootout was once again hosted at The Outback Raceway in Chico, California. Racers from the local area to neighbouring states would make the trip to what is one of the nicest indoor facilities in Northern California. Outback’s indoor track is known for its consistent, high-bite clay surface and challenging layouts. The pits are heated, and there are classes for all electric off-road racers. Competitors will automatically be entered to win dozens of raffled prizes from our sponsors. A Main Hobbies’ massive inventory is available to racers who need miscellaneous parts while competing, and those will be conveniently delivered to their pit spaces. Not many tracks can say that have that kind of inventory. All off road classes were offered and the largest being the 2wd Stock Buggy class with nearly 5 full heats. 4wd SC and 4wd Mod buggy were also large classes at the event. Qualifying for the event would be qual points best 2 out of 4 rounds.

Click here to continue reading

March 6, 2013

Matrix 1/8th Xtreme rims

Matrix have introduced their newly designed Xtreme rim for 1/8 featuring new plastics following a year and a half research with a large European plastics company. The new design offers higher cornering speeds and lots of rear stability and will be available in three different types, normal (white plastic), carbon (with carbon) and a lightweight version. The light version uses a modified nylon which has a mass less than the polypropylene used by other manufacturers, the benefits of which is weight, these rims being the lightest on the market but with the same strength as the normal nylon rim. The weight of one set of 1/8 rims is only 62 grams. matrix will soon produce 1/10 rims with this special plastic.

Source: Matrix Tires [matrixtires.it]

March 6, 2013

RDRP Durango 210 C-hubs & wing mounts

Revolution Design Racing Products have introduced new aluminium option parts for the Team Durango 210 series of vehicles such as the DEX210 buggy, DEST210 stadium and DESC210 short course truck. Made for all 210 series kits is the DEX210 C-Hub set. Precision CNC-machined from aircraft quality 7075-T6 aluminium and coming with a glossy black anodised finish the parts replace the stock plastic caster blocks with a more durable and sexy solution. The blocks sport four threaded mounting locations for the upper camber link and a -1mm track width per side for a slightly narrower front end. The C-Hubs are usable with the stock steering hubs and caster inserts.

View details about the wing mounts here

March 5, 2013

AKA 1/10 buggy Handlebar & Impact pre-mounts

AKA have announced that the first of their 1/10 buggy pre-mounts are available in the Handlebar and Impact tread patterns in Soft and Super Soft Compounds. They both feature the industry standard Red inserts on your choice of white or yellow HEXlite wheels.

Source: AKA [raceaka.com]

March 5, 2013

Serpent 811 Cobra EP buggy 2.0 buggy

Serpent have released the new 811 Cobra EP buggy 2.0, a new development realized following a full year of racing across the globe, listening to feedback from many drivers and dedicated testing on many different surfaces. The feedback from the drivers on the Cobra E-Buggy in general was very good but according to some drivers the car could benefit from a more responsive rear end, combined with a bit more steering, which would bring the Cobra to the highest performance level. The 2.0 features new wider rear end, differently positioned new rear shock towers along with other small changes to the rear of the car.

View more details and images here