Red RC » Products

November 18, 2008

LRP ZR.30 X Competition Engine

LRP have released their latest truggy engine, the new ZR.30 X Truggy is the replacement for the successful Z.28 R Spec. 3 Truggy motor. An uncompromising competition engine specially tuned for the demands of a .30 engine, the massive XTEC T6 crankcase provides the engine with a high structural rigidity, with extra thick ribs, particularly between the front and rear ball bearings. The carburetor is also completely revised, and is now flow optimized resulting in maximum performance and simple tuning.

Click more to see the feature list… content

November 18, 2008

Dynamite tools for gas racers

Dynamite have released some new tools for gas racers including this new Clutch spring tool and 3 in 1 tuning screw driver. The Clutch spring tool is suitable for any .12 – .27 nitro engines that use a standard 3-shoe clutch. Using the large knurled handle the tool helps install and remove clutch shoes in seconds. The 3 in 1 tuning screw driver has a removable anodized handle that acts as a piston locking tool as well as a glow plug holder. Combine this with the flat head screw driver for adjusting your carburetor and you have 3 tools in 1.

Click more to see the screw driver… content

November 17, 2008

Protoform LTC-R Sedan Body

The much anticipated Protoform LTC-R body shell that we previewed back in October is now available. This Global Body Spec ready race body is designed specifically for rubber tire racing whether it’s on a carpet or a paved surface racetrack. It was designed with slightly more steering ability than the Mazda 6 and Mazda Speed 6 body styles, yet a bit less aggressive than the Protoform R9-R body. To further aid balance and rear grip the wing mounting location that’s slightly more rearward. The LTC-R features two trim lines, one for IFMAR, EFRA, ROAR, JMCRA racing at the 115mm height as well as the BRCA’s 120mm height rule. The oversize rear wing helps performance on a poor-grip surface that’s commonly experienced in club racing but also incorporates trim lines for sanctioned style racing. Available in 2 different weights of genuine lexan and comes with protective film, decals and wing mounting hardware.

Click here to see more photos… content

November 17, 2008

KM Racing V-One RRR Upper decks

KM Racing have released two new optional upper decks for the Kyosho V-One RRR 1/10th scale chassis. Made from carbon fibre, both feature a hexagonal counter bore design for locking the car’s fifth body post and both are supplied with a pair of fuel tank o-rings. The difference between the 2 is that one allows for the standard upright mounting of the throttle servo, while the 2nd enables it to be mounted in the lay down position for a lower centre of gravity.

Click more to see the other radio plate… content

November 16, 2008

PN Racing KO Module adaptor

PN Racing have been in contact to tell us about this new KO module adaptor for Futaba 3PKand Sanwa/Airtronic M8 & M11 transmitters. Most Kyosho Mini-Z drivers want to use the 2.4ghz Mini-Z but only KO Propo have released a 2.4ghz module for this. This adaptor can convert the KO module so that you can use it with the above radios listed.

Click more to see other images… content

November 16, 2008

HongNor X2-CR Conversion kit

HongNor have released this new X2-CR Conversion kit which helps improve performance as well as reduce weight of the overall car. With a new chassis layout and forward centre of gravity, the buggy is faster through the corners and accelerates pit of the corners quicker. The new gear ratio gives the car smoother and faster acceleration, while the new lightweight aluminium shafts deliver the same great power more efficiently and smoothly to the drive train.

Source: HongNor [hongnor.com.tw]

November 15, 2008

AKA Racing Competition truggy tires

AKA Racing have announced new tires for the 1/8 competition truggy class. On the heels of the very successful line of competition buggy tires, these new truggy tires include all the same great features that are sure to deliver the best possible performance. AKA tires are made using the highest quality rubber compounds that have been specially formulated and refined over decades by Mark Pavidis and Gil Losi. The rubber compounds are formulated to provide the best balance of traction and wear resistance and AKA truggy tires include a standard bead configuration, so in addition to perfectly fitting the AKA truggy wheels, they also fit many of the most popular brands of truggy wheels.

Click here to read more… content

November 14, 2008

CS Electronic Micro cells, motors & tires

CS Electronic have announced the release of some new products for micro racers including new batteries, motors and tires. The cells are 1600mAh and replace the older 1500mAh offering more run time and power. The new micro magnetic brushless motors are designed to fit 1/18th scale vehicles and come in a range of versions from 6500kv to 9000kv. Finally to help your super quick micro vehicle around the track, CS now offer new foam tires for both front and rear with the front shores in 42, 45, 48 and 50, while the rear come in 34, 36, 38 and 40.

Click more to see the other products… content