November 10, 2008

Xenon EP Buggy ride height gauge

Japanese company Xenon, who are present at the World Championship in Thailand, showed us one of their new products designed for the electric buggy market. The clever ride height gauge has been machined from a piece of black anodised aluminium, with a hole down the centre to reduce height. It works in a similar fashion to their innovative ride height guage in that rotating the tool gives it different heights to measure. Simple and effective, it can measure ride heights from 21mm to 28mm.

Click here to see more pictures… content

November 9, 2008

Caster Racing Pro EX-1R & Sport RTR

Caster Racing have announced the release of their Pro EX-1R and the Sport EX-1RTR. The pro kit is made with 7075 Swiss aluminum, together with lightened parts. It has heli cut gears, big bore shocks, 6 CVDs, new Caster Racing tires, aluminium battery straps and front &rear swaybars. The RTR kit is based off the Sport kit and it is made with T6 aluminium and comes supplied with the new Caster gearing, Caster Racing brushless motor (36x60x2045), Hobbywing ESC, Caster Racing steering servo, FM radio and receiver.

Click here to see more photos… content

November 9, 2008

LRP SXX Competition prototype ESC

Seen in the pits at the Worlds in Thailand is the new prototype ESC from LRP, called the SXX. Much smaller than the previously available Sphere TC spec ESC, the new controller uses a metal plate set into a plastic frame, to which a heatsink fan combo can be applied but currently isn’t necessary for the 4 cell 1:12th scale class. The new ESC, which is also here in Nosram colours, features a revolutionary copper core cooling technology to keep the internals at a low temperature, while the controller software now has 10 power profiles to select from for finer adjustment of power delivery. Also new is what the company calls X.Brake which provides stronger braking, and it too has 10 adjustment settings which can be set by the 2 new externally mounted buttons.

Read the full coverage on our event site here.

November 9, 2008

New in Thailand – Xray XII

As mentioned previously on our news page as well as in our 1:12th scale introduction piece, Xray are the latest manufacturer to enter the market, with the XII. We were able to get up close and personal with the LRP X12 powered example belonging to Factory Xray driver Alexander Hagberg from Sweden. Already in it’s second version, following feedback from the team after a recent test at the RCS track, the car is in appearance at least very similar to other brands on the market. Chief designer Juraj Hudy, who has limited experience of the class, says that while the car may be similar in appearance to others out there, that is more a reflection of the state of development of the class which has seen chassis design developed to a point where extra performance can only be found in small refinements. Featuring a T-bar, which some believe would be more suited to a lower traction surface, as opposed to the trailing link design seen on the CRC and Associated cars, the cars debut later today will be closely watched by all racers and manufacturers present.

Visit our event site here for XII photos from Bangkok.

Click more to see the official promo photos… content

November 9, 2008

Edit RC D8/Lightning Hubs & Bearings

Edit RC have released a range of aluminium rear hubs for the Hot Bodies Lightning and D8 buggies. Available in 1, 2 and 3 degrees of toe-in, they have been made from CNC machined high quality 7075 alloy and they feature a durable, cool grey hard anodised finish. Also new from Edit are a complete set of high quality bearings for the same range of cars. The set contains all the bearings you need to give your Lightning a complete re-furb at a fraction of the normal cost.

Click more to see the bearing set… content

November 8, 2008

Xray enter the 1/12th scale market

Xray are to become the latest major competition RC manufacturer to enter the resurgent 1/12th market with the news that they will run a prototype of their all new XII at the 1/12 World Championships in Thailand which get underway tomorrow. Joining Serpent, who recently entered the market with the S120, the Slovak company will be out to impress on their debut in the category with the formidable line-up of Teemu Leino, Alexander Hagberg, Paul Lemieux and Martin Hudy all set to run the car at the RCS track.  We will catch up with the XII’s designer Juraj Hudy later to bring you more on Xray’s latest creation.

Source: Xray [teamxray.com]

November 8, 2008

Much More Diff Break-in Machine

Much More have announced the release of 2 new products, a Diff break-in machine and a new battery hole tool. The diff break-in machine is a device that can quickly and effectively break-in your new ball differential. Simply connect the end of the device to your car’s wheel nut and while holding the tire on the other side switch on the 12V motor. After the break in process is complete the diff will be smoother and have increased life and efficiency. The battery hole tool is effectively a hand drill that places the correct sized hole in the casing of pre made battery packs to enable them to be mounted in the Much More Pack Equalizer.

Click more to see the battery hole tool… content

November 8, 2008

Speedzone IP4200 LiPo 30C+ pack

Speedzone have announced their entry into the competitive LiPo market with the release of the IP4200. The IP4200 is rated at 30C+ and features low resistance with 430+ seconds in runtime at 35amps. Wires exit the lipo case through the side and Deans style connectors are available as an option.

Source: Speedzone [speedzoneusa.com]

Tonisport
Mibosport
LC Racing
VP Racing
SRT
Monaco RC
T-Works