Infinity has released a new carbon front body mount plate for use with their long front body post to increase the rigidity around the front bulkhead of their IF18. Using this combination increases response in initial steering while still maintaining a mild steering feel in the middle part of the corner. The new mount plate also offers a weight saving of 4g over the standard kit body mounting.
RC Maker have introduced their new V2 light body anti-tuck wing mounting sets for the most popular 190mm touring car bodies on the market. Our brand new Anti-Tuck Wing Mounting Set Lite V2 introduces an even more compact, efficient way of integrating wing mounting and anti tuck components. This system prevents body tucks behind the rear wheel arch during racing, as well as inconsistencies on high speed tracks and in windy conditions, causing the bodyshell to vibrate. Weighing in at only 5g for the pair, this lightweight strut only requires one additional M3 screw other than the wing mounting screw to secure the strut behind the wheel arch. Using the existing upper wing buttons, racers can screw directly into the strut securing it at the top whilst also securing the wing. The new design also offers extra material that sits in the vertical part of the wing strut. In crashes this section of the bodyshell can often crush or deform, and is unable to be repaired. The brace fixes this and prevents deformation in this area, ensuring your body lasts longer. The strut is produced by Australia’s highly regarded 3-D-printing experts Think RC. These are constructed of a rigorously tested, flexible, yet strong plastic material which allows them to be used time and time again between bodies. The struts are currently available for the Protoform Type-S, Zoo Racing DBX, Preopard and Hellcat as well as the Mon-Tech Racer 2.
BMT have announced the release of their new short-type big bore shock absorbers for the 016GT 1/8th on-road car. Sporting a threaded aluminium shock body, black anodised upper and lower caps as well as black-coated low-friction shock shafts. The shocks come in sets of two and they are available now.
Source: BMT [bmt-team.com]
Xray have announced the release of graphite-reinforced front lower arms for the newly-introduced XT4 4WD off-road truggy. Moulded from a specially-formulated graphite composite material the arms offers improved flex rigidity for a more precise handling in medium to very high-bite track conditions. The arms are non-directional and can be used on both the left and right hand side of the vehicle.
Source: Xray [teamxray.com]
Hobbywing have announced the release of their new XeRun XR10 Pro G2 brushless competition speed controller for 1/10th scale classes. The updated variant of the ultra-popular XR10 Pro features high-performance 32-bit M4 microprocessing for super-fast and precise control. A built-in reverse battery polarity protection protects both the controller and battery when things are getting a bit hectic in the pits and a range of new accessories such as non-polarised capacitor banks and over-sized fan mounts complement the G2 ESC. The latter are machined aluminium heatsink design frames and allow the use of 30mm fan units in high ambient temperature conditions. New for the G2 is also the ability to use an external switch in case the internal one is hard to reach and in addition to the greatly improved hardware the speedo also received some new software features such as a greater PWM frequency range for throttle and brake, ensuring optimised control when needed. Also new are finer adjustable turbo increase and decrease rates as well as a 101 percent to 150 percent brake range, a feature that comes in handy when running high-turn stock motors with aggressive gear ratios. New for the G2 is also the ability to adjust motor rotation direction and the built-in BEC system offers adjustable 5V to 7.4V and 10A output. Last but not least comes a softening function that will improve vehicle control in high-power modified classes. Like the previous controller the G2 is programmable and upgradable using Hobbywing’s WiFi Express module and an iOS or Android mobile device with a more traditional programming box being also available. The controller is available with black/silver, orange or red case details and it is available now.
View a list of the specifications and more images here
JConcepts, together with RM2 brings the heavy-metal grease for a multitude of uses in the RC industry. The grease is the perfect complement for metal to metal parts in the drive-line such as ring and pinion gear assemblies. It’s also a great spread for CVA’s, diff out-drives and inside the diff on the seated O-rings. The heavy-metal grease can also be used on the thrust assembly on a 1/10th off-road differential and is an all-around handy grease for many different applications.
Source: JConcepts [jconcepts.net]
RC Maker have introduced their new damper O-ring tool for Awesomatix touring cars. It is a simple, yet effective tool that aids in seating the O-ring into the damper, without pressurising the damper. It allows all excess oil to flow around the tool and out of the damper, which is crucial to the smooth assembly with the P45R round damper rubbers. Not only does it seat the O-ring and allows the excess oil to flow, it also acts as a scoop to get the excess oil out of the area, which is unwanted there when pressing the bearing in. When twisted it will act as a paddle to remove the oil from the slot. The tool is made from high-quality carbon fibre and it is available now.
Coming soon from Xray is the latest incarnation of their XT8E 1/8th electric off-road truggy kit. Full details will become available in time for the official release which is expected to happen with in the next week or two.
Source: Xray [teamxray.com]
