Red RC » Products

May 6, 2019

RC Maker GeoCarbon touring car tweak wheel set

RC Maker have introduced their all-new GeoCarbon tweak wheel set for EP and GP touring cars. The super lightweight wheels weight in at only 2.2g each and are precision machined to minimum tolerances to help de-tweak the car. Consisting of a less than half of a normal setup wheel construction, they serve the purpose of checking the tweak via lifting the chassis off the ground at one end only, and making sure the wheels leave the ground at the same point, being an extremely common way to de-tweak an on-road car. Using precision machined parts is far more accurate than using a normal wheel and tyre, and more accurate than a normal rubber O-ringed setup wheel. Having no buffer between the wheel and ground makes it far easier to feel when one wheel is lifting up earlier, as drivers can feel the abrupt bump on the setup board. This leads to more accurate and faster setting of tweak.

View another image here

May 6, 2019

T-Works MP10 30mm lightweight brake discs

Coming from T-Works and made for the new Kyosho MP10 and older MP9 TKI4 and TKI3 buggies is a lightweight brake disc set. The 30mm discs are precision-made and offer a vented design for less brake fading even in long mains and when running in high ambient temperatures. In addition the reduced material plates are also very light, making for quicker spool-up and acceleration. The brake disks come in sets of two and they are a direct fit.

Source: T-Works [rc-tworks.com]

May 6, 2019

TBR 6.0 Silver & Black Edition engines

Team Bianchi Racing have announced the release of their new TBR 6.0 Silver and Black Edition nitro off-road engines. Evolved from the 5.0, the 6.0 variants offer further improved throttle feeling and fuel consumption. It is understood that the Silver and Black Edition engine only differ by their head colours.

View the Black Edition engine here

May 5, 2019

T-Works EB410/ET410 titanium captured rear hinge pins

T-Works have announced the release of captured titanium rear outer hinge pins for the Tekno RC EB410 and ET410 kits. The design of the suspension shafts improves overall reliability due to the captured design while the lightweight and corrosion resistant titanium material reduces unsprung masses. The set includes a pair of hinge pins and suitable nyloc nuts.

Source: T-Works [rc-tworks.com]

May 4, 2019

DMS Partz SBX-410 Reactor shock pistons

Coming from DMS Partz and made by TMG Speed are the new Reactor shock pistons for the Corally SBX-410 buggy. The pistons are designed for better bump handling whilst still allowing the buggy to jump and land well. They come packed in pairs, and the pre-drilled ones are available as 2×1.2mm, 3×1.2mm or 4×1.2mm variants to allow drivers to tune and enlarge the holes to their own liking or preference, but also available are blank versions with four pilot holes to drill as required.

Source: X-Factory [xfactoryrc.co.uk]

May 4, 2019

Reedy S-Plus 12.5mm HT rotor

Reedy have announced a hi-torque rotor option for the popular Sonic S-Plus Spec motor range. Because the rotor is produced using high-strength material, low-end torque and brake strength are improved with a reduction in fade during a race. The Hi-Torque rotor comes balanced for smooth operation and is easily identified by the part number laser etched on the shaft and its distinctive blue ring.

Source: Team Associated [teamassociated.com]

May 3, 2019

FTX Outback Fury Xtreme 1/10 4×4 Pro Spec trail roller

CML Distribution have announced the soon release of the FTX Outback Fury Xtreme 1/10 4×4 Pro Spec trail roller. Based on the FTX Fury, the Outback Fury Xtreme is bringing together new features and the current crop of aftermarket Fury option parts for a hardcore rig ready to add the owner’s choice of electronics. Factory assembled and finished with a pre-painted scale styled pick-up body the Xtreme comes complete with moulded tubular roll cage and integrated roof top LED light bar. With metal axle and pinion gears, drive housings, centre telescopic sliding driveshafts and a complete metal 3-gear transmission the Xtreme is ready for the toughest courses. The super stiff carbon fibre chassis rails provide the ultimate platform for the 6mm steel multi-link suspension to navigate terrain, while aluminium oil-filled shock absorbers smooth out the bumps. Other features include aftermarket CNC machined aluminium accessories, painted metal axle covers, chrome hub covers and super soft aggressive tread high traction tyres. The ARTR kit will hit stores by mid-June.

View a list of the features and more images here

May 3, 2019

MonacoRC aluminium shim sets

MonacoRC have introduced their new Supreme Essential Products aluminium shim sets in black and orange colour. Measuring 3mm x 6mm and being available in 0.5mm, 1.0mm, 1.5mm, 2.0mm and 3.0mm thickness, the shims come in several sets including 80-pieces mix kits that include 20 shims each of 0.5mm, 1.0mm, 2.0mm and 3.0mm, 30-piece kits of ten 0.5mm, 1.0mm and 1.5mm shims as well as 30-piece kits of 1.0mm, 2.0mm and 3.0mm. The shims are also available separately as ten or 20-piece packs of each thickness and they come in MonacoRC’s coloured assortment boxes that include neat stickers and that are also available separately while the larger 80-piece packs come in clear parts boxes.

View the other sets here