Red RC » Products

February 25, 2019

Pro-Line X-Maxx Pro-arms & Pro-Hubs

Coming from Pro-Line and made for the Traxxas X-Maxx are the new Pro-Arms upper and lower arm kit as well as the Pro-Hubs rear uprights. Starting with the arm kit, the US-made kit includes cutting edge race-style black arms with smooth bottoms that are capped off with stone gray stiffening plates resulting in extremely durable and rigid arms. The arm plates are held on by multiple flat head screws and the stone gray colour is the exact same as Pro-Line’s Impulse Pro-Loc wheel rings so they can be dyed or painted to match the truck’s style. The Pro-Arms are direct replacements for the stock X-MAXX arms and are designed from the ground up to be nearly indestructible. Each arm kit includes a set of two upper and lower arms along with the stone gray plates and hardware. The Pro-Arms are cored out from the top to save weight and the arm plates keep dirt, mud and debris out of the arms.

Continue reading here

February 25, 2019

SWorkz S35-3/GT-series gearbox set

Coming from SWorkz and made for their S35-3 series off-road and GT cars is an updated gearbox set. It now utilises 5x13x4mm ball bearings which is especially helpful for the GT cars as the ball races can handle higher RPM while creating less temperature all while retaining a smooth and efficient drivetrain. The gearbox fits all 35-3 series and GT cars.

Source: MW RC Cars [mwrccars.at]

February 23, 2019

Pro-Line 2.8”LP stadium truck tyres

Coming for trucks such as the Traxxas Rustler 2WD or 4×4 are three new specialised 2.8” tyres from Pro-Line. Starting with the Trencher LP 2.8” all-terrain tyre, the tread is ideal when running in loose or hard-packed dirt, sand, snow, street or gravel conditions. The Trencher LP 2.8” is a direct replacement tyre and will fit on any 2.8” wheels including all of Pro-Line’s 2.8” wheel options. The Trencher tread was designed to have ultimate traction combined with long-lasting durability. Each tyre lug is shaped to dig into whatever surface modellers are running on and is ultra-thick so that it is extremely durable. Next up is the Sand Paw LP 2.8” tyre. There is nothing like the rush of ripping through the sand dunes or shredding the fresh powdery snow with a high-powered truck. Usual tyres will just slip around in the sand and snow, but the Sand Paw LP tyre will grip, rip and roost. The 2.8” tyre will fit most 2.8” wheels. Last but not least comes the Street Fighter LP 2.8” tyre that has the perfect balance of G force enhancement and style that will keep the truck turning heads. The Street Fighter LP 2.8” is a direct replacement tyre and will fit on any 2.8” wheels including all of Pro-Line’s 2.8” wheel options.

View the other new tyres here

February 23, 2019

Yokomo BD9 2.0mm hard carbon fibre main chassis plate

Coming soon from Yokomo is a new 2.0mm carbon fibre main chassis place cut from a harder graphite material. Thinner than the standard kit carbon fibre chassis yet harder thanks to a special graphite material, the chassis is an in-between solution for tracks that require a harder chassis than the standard kit carbon plate, yet need a softer solution than an aluminium plate. In addition the reduced thickness allows to run lower roll centre settings which can help in lower grip conditions. The chassis is precision machined to the highest standards, ensuring straight and tweak-free alignment of all parts, ensuring equal left-to-right flex and steering characteristics.

Source: Yokomo [teamyokomo.com]

February 23, 2019

Pro-Line Chevy K-10 & Metric rock crawler bodies

Pro-Line have introduced two new body shells for 1/10th scale trail trucks and rock crawlers. First up is the 1978 Chevy K-10 Cab and Bed body that allows to make a crawler look even more scale with the short box step side Chevy cab and bed which is one of the hottest and rarest nostalgic full-size trucks. The 1978 K-10 body has been carefully sculpted with realistic details that recreate the lines and squared off style of this iconic truck. The separate cab and step side bed gives Pro-Line the ability to mould even more realism into the body and is designed to fit standard 12.3” wheelbase crawlers. The body comes clear, including window masks and a detailed decal sheet.

Continue reading here

February 23, 2019

Pro-Line Slide Lock MC 1/8th buggy tyre

Coming from Pro-Line is the Slide Lock 1/8th buggy tyre in MC clay compound. The Slide Lock is a unique tyre design from Pro-Line that is made specifically for smooth, low grip tracks. It features a pattern of small, tightly packed hexagon and triangle shaped pins so drivers can lay down as much rubber as possible. The tread on the tyre is laid out wider across the carcass for a flatter profile overall compared to other Pro-Line 1/8 race tyres. Each hexagon pin has a deep sipe down the middle of the tread for added flex and grip on even the slickest of surfaces. The built-in tread flex means drivers can run harder compounds for longer wear and still have good traction when they need it. The large and stiff side pins reach far down the sidewall to reduce edginess as much as possible. The tyre comes including blue closed cell inserts and in the proven MC clay compound.

Source: Pro-Line [prolineracing.com]

February 23, 2019

Pro-Line Super J & Octane drag racing body shells

Pro-Line have introduced their new Super J and Octane drag racing body shells for converted Slash-type short course trucks. Starting with the Super J, PL’s first-ever body dedicated to the ever-growing SC drag racing class, the full-blown Pro-Mod body will transform the Traxxas Slash 2WD into a scale quartermile beast. This retro custom hot-rod style body features a ton of scale details to give any SC drag car a super unique, race-inspired look. The Super J is a convenient 1-piece body design with no assembly necessary. Pro-Line recommend using a 2.2” buggy wheel/tyre combo on the front combined with a 2.2”/3.0” SC wheel/tyre in the rear for the ultimate scale hot-rod stance. However, to create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to the 2WD Slash in order to fit correctly. A list of modifications needed to fit the Super J can be found here.

Continue reading here

February 22, 2019

Xray T4F 1/10th FWD touring car kit

Following a couple of body-on teaser images, Xray have finally unveiled their all-new T4F 1/10th front wheel drive touring car kit. With the FWD concept being a first for the Slovakian manufacturer, the car still shares about 90 percent of its parts with the company’s ultra-successful T4 4WD touring car platform, making spare parts stocking easy while allowing for a simple, efficient and easy to work on platform. The car was developed and tested in cooperation with Germany’s Harald Schmittgen and it makes use of a narrow 2.2mm thick carbon fibre chassis that features predrilled locations for the adjustable battery mounts and optional chassis weights, making for a super reactive and easy to control car in all track conditions. A specially-developed 2.0mm graphite top deck is a universal solution for both low and high-bite tracks, providing both exceptional traction and side bite.

View more details & images here