Red RC » Products

August 3, 2018

Protoform Ford GT 190mm USGT body shell

Protoform have introduced their long-awaited Ford GT 190mm body shell for the USGT class. From the ultra-low stance, to the teardrop-shaped cockpit, to the never-before-seen b-pillar “side wings”, the Ford GT is the ultimate expression of form following function. Protoform has captured every detail of this mid-engine sports car that captured GT class wins at the 2016 24h of Le Mans and back-to-back 24h of Daytona in 2017 and 2018. The officially-licensed body fits 1/10th scale 190mm touring cars, with extra clearances built-in to fit over the front and rear shock towers. The distinctive side wings are add-on pieces that can be secured with the included hardware, shoo-goo or high-strength double-sided tape. New lighter-weight material lowers the centre of gravity of the USGT car, improving responsiveness. Each body also includes injection moulded nylon wing struts, a unique rear wing, decal sheet, window masks, and overspray film.

View more images here

August 2, 2018

WRC NTX 1.2 1-piece engine mount

WRC Racing have introduced a new 1-piece engine mount for the NTX 1.2 1/10th 200mm nitro kit. The monoblock is machined from Swiss 7075-T6 aluminium for durability and using the single piece mount will increase chassis rigidity and make for less stress on the engine’s crankcase.

Source: WRC [wrc-racing.com]

August 2, 2018

T-Works MBX8, D817 & SRX8 fuel tank guards

T-Works have introduced three carbon fibre fuel tank guards for kits such as the Mugen MBX8, HB Racing D817 and RGT8 as well as the Serpent SRX8. The guards are machined from high-quality carbon fibre and they attach utilising already existing mounting locations and by using the included hardware. The carbon fibre sheets will prevent damages to the tank due to the hot exhaust pipe while also keeping heat away in general to ensure the tanks will not or at least swell less – a symptom that can cause issues in post-race tech inspections.

View the other sets here

August 2, 2018

Yeah Racing roll out new TRX-4 option parts

Made for Traxxas’ popular TRX-4 trail truck are two new option parts from Yeah Racing. First up is a set of brass portal axle covers whose bulky design adds 118g of weight per axle. The covers are a direct fit and while adding weight and style they also improve overall rigidity of the portal axle assembly. Also new are metal rock rails for the TRX-4 truck. Made from steel and coming with a black surface coating for wear and looks, the rails replace the original plastic units to offer better chassis and body protection in heavy terrain.

View more images here

August 2, 2018

Zero Tribe BD8-2018 ultra low shock towers

Zero Tribe have introduced new ultra low shock towers for the Yokomo DB8-2018 touring car that allow to run Xray’s ULP or Axon’s High Big Bore shock absorbers. The shock stays are cut from high-quality carbon fibre and using them in combination with the ultra short shock absorbers will lower the car’s overall centre of gravity for improved handling especially on high to very high bite surfaces.

View more images here

August 2, 2018

Motiv universal motor bearing tool

Coming from Motiv is their new universal motor bearing tool for the company’s own brushless motors as well virtually any other brand. What makes this bearing tool special is its ability to adapt to any design motor and also that it can be completely rebuilt to replace any part necessary in the event that something strips or gets bent. Included are three different cup sizes which will allow owners to choose the proper place on the sensor unit or end bell to apply the pressure necessary to install new bearings. This results in drastically reducing the chance of motor damage during bearing installation.

Source: Motiv [motivrc.com]

August 2, 2018

Team Associated TC7.2 Factory Team Kit touring car

Team Associated have announced their newest 1/10 scale 4WD electric touring car kit, the TC7.2 Factory Team Kit, the next generation in the TC7 lineage. With current touring car platforms reaching higher plateaus of precision and performance, the engineers behind the doors of Area 51 wasted no time to ensure that the TC7 exceeds expectations. The TC7.2 comes packed with a host of new components and the features necessary to keep drivers on top. As the on-road market advances at an ever-increasing rate, more is demanded from the chassis to accommodate the ultra-competitive racing classes. A successor to the TC7.1, the TC7.2 maintains the proven suspension geometry, but adds refinement to chassis balance and the flex necessary for today’s racing class. The centrally positioned IFM Inline Flex Mount motor mount adds several mounting configurations to help fine-tune chassis flex to the racing surface, and has an integral mounting position for an optional chassis pitch control system PCS. The TC7.2 also carries an all-new aluminium rear gear differential for the ultimate in precision and heat dissipation, as well as an ultra-light front spool assembly. Along with a list of new features, the TC7.2 Factory Team gives drivers everything they need to race at the highest level. The kit is set for a release in September.

View a list of the features and more images here

August 1, 2018

JConcepts 2010 Ford Raptor MT body shell

Made for 12” to 13” wheelbase rigid axle monster trucks is JConcepts’ new 2010 Ford Raptor body shell. As the full-scale trucks hit the mid-2000’s, they were looking for a body to spice up their act, look more racy and add another dimension to the appearance. A lot of the teams raced to market the first “trophy truck” body or desert themed monster truck and a new generation started. On the RC side of things, the option just did not exist which left a lot of scale monster truckers scratching their heads while trying to come up with that look for the scale counterparts. This is where JConcepts’ latest MT body steps in with large wheel well openings, sculptured cab, recessed windows, hood scoop and race tucked rear fenders. The body will work well on a number of solid axle trucks on the market but is also adjustable in wheelbase fitting trucks from 12” to 13” long. The race proven extra cab look allows ample room to mount the body on an Axial SMT10 and still packs a mean punch mounted on custom “shafty” and clod buster based rigs. The flat bed area can be left clear during the painting process or detailed exactly how the user wants to replicate their favourite monster. Each package includes window masks, a 2010 generation Ford Raptor specific decal sheet and the clear polycarbonate body.

View more images here