Red RC » ProTek

February 17, 2010

ProTek R/C ROAR Approved LiPo race packs

A Main Hobbies today announced their new line of ProTek R/C brand Lithium Polymer hard case battery packs. Starting with this ROAR legal 1-cell 5000mAh capacity pack with a true 40C constant discharge rate, it includes a pre-installed Deans style T-plug. Next up is the ROAR legal 2-cell 5000mAh pack with a true 35C constant discharge rate. This pack includes a charge/balance lead with 4mm bullet connectors for a low resistance connection to the battery and a 3-pin Align/E-Flite style XH connector. Next up is the 5200mAh 45C saddle pack which includes bullet connectors for charging, with a Deans style T-plug and XH balance connector installed. ProTek offer two versions of their ROAR approved 5600mAh 50C packs that come either pre wired or with cables connected using 4mm bullet connectors. Finally for 1/8th scale racers, this ROAR legal 4-cell pack features 5600mAh of capacity and a true 50C constant discharge rate and includes and integrated Deans style T-plug and 5 pin XH connector.

Click here to see the other packs

February 9, 2010

ProTek R/C Power supplies & NiMh battery packs

A Main Hobbies have announced a range of ProTek R/C brand regulated DC power supplies. Starting with the Pro 40, it has a regulated output of 13.8 volts at 40A while the Pro 20 has the same output voltage but with 20A. One final power supply is the super small Pro 10 regulated DC power supply which as the name suggest, has an output of 10A. All feature an internal cooling system that keeps the power supply cool even when it is being worked hard, as well as current limiting, and short circuit protection circuitry, while the Pro 40 and Pro 20 also feature an integrated USB connector for charging your personal electronics. Combine this with universal output 4mm banana jacks that can also be used with clamp type connectors, and you have one of the most flexible power supplies available. ProTek R/C have also released new battery packs including the Intellect IB4600SHV battery pack with Traxxas Connector and 4600mAh of capacity and is a hand soldered side by side pack. Other new packs include the IB4200 and IB3000 packs that are both available with either pre-soldered Tamiya or Traxxas connectors.

Click here to see the other products

January 20, 2010

ProTek R/C 5400 & 5000mAh LiPo race packs

A Main Hobbies today announced four new ProTek R/C brand LiPo packs, starting with this 4-cell hard case pack with 5400mAh of capacity and a true 35C constant discharge rate. This pack includes an integrated balance charge lead with a Deans style T-plug installed. Next up is a 2-cell hard case 5000mAh pack with a true 40C constant discharge rate that includes heavy duty bullet connectors and a balance charge lead that you can solder onto the wire of your choice. The bullet connectors also feature side cut-outs for soldering on wires to fit in tight areas or in cars with low upper deck heights. A similar pack this other 2-cell 5000mAh pack also has a true 40C constant discharge rate but includes an integrated balance charge lead with a Deans style T-plug installed. Finally, a 1-cell 5000mAh hard case pack which has a true 40C constant discharge rate and includes a Deans style T-plug installed.

Click here to see the other packs

October 31, 2009

ProTek R/C 1C LiPo pack & Connectors

New from A Main Hobbies brand ProTek R/C comes a number of new items including this Supreme Power 1S 4700mAh, 40C Lithium Polymer hard case battery pack. This pack includes a Deans style T-plug installed. These battery packs are built using a hard plastic pack that is required for use at ROAR sanctioned tracks and events and are thin enough to fit into all pan cars, and with the humps on the bottom will be secure in vehicles designed for side by side 4 cell NiMH race packs. Also new are the MaxxCurrent XT60 device and battery connectors which have 3.5mm pins and are made from high-temp Nylon and gold plated solid bullet connectors, both included in the injection mold at the time the connector is formed and are the ideal power connector for high current applications. Continuing with connectors the Super Bullet solid gold connectors are an absolute must for high current / high voltage applications. With lower resistance than a typical Dean’s style ultra plug and traditional spring-type bullet connectors, they are the new standard for brushless motor applications. Finally come these LiPo male and female balance connector leads that are used primarily to make adapter cords to mate batteries to chargers or balance boards. These balance connectors are equipped with XH (ProTek/E-flite/Align) or TP (Thunder Power) connector ends and use 24AWG wire in lengths varying from 10cm to 30cm. Available in sizes to fit lithium batteries from 2S through 10S.

Click here to see the other products

July 9, 2009

ProTek R/C 2300mAh LiPo RX packs

New for the ProTek R/C brand are these 2 Lithium Polymer 2-cell receiver battery pack with 2300mAh of capacity and a true 8C constant discharge rate. These super light weight Li-Poly battery is designed to power the electronics of 1/10th & 1/8th scale gas powered race cars and are available in both square and stick pack configurations. These packs are built with a lexan plastic shell around the outside of the battery, and then covered in blue heat shrink. The lexan shell is designed to protect the battery cells while in the vehicle, for longer life.

Click here to see the other stick pack

June 16, 2009

ProTek R/C iCharger 208B DC charger

New from ProTek R/C is this iCharger 208B Lilo/LiPo/Life/NiMH/NiCD DC battery charger. This charger allows you to charge 2S to 8S lithium batteries, or multiple batteries connected together in series and comes with an XH style balance adapter board that fits Align, E-Flite and ProTek R/C battery packs, and adapter boards for other batteries are also available. It is also designed to allow you to balance multiple batteries at once as you can charge and balance up to two 4S batteries, two 3S batteries or three 2S batteries at once using a serial charge lead.

Click here for the specifications

June 4, 2009

ProTek RC P-8 Super hauler bag

ProTek R/C release their P-8 1/8th scale buggy super hauler bag with plastic inner boxes. This bag was designed from the ground up for 1/8th scale buggy racers and has space on top under a covered flap for storing all your tools, a place on the back for your setup board and storage compartments on the side for storing your setup equipment or other tools. Inside the bag has three layers of corrugated plastic drawers, with four split draws on the bottom (two each side by side above each other) and one large drawer on the top that is big enough to hold a 1/8th scale buggy with wing and wheels attached. In addition, it is also very easy to tow the bag around the track as it features a retractable handle and smooth trolley wheels. Also included is a carrying strap that can be moved out of the way to access tools in the top compartment, or adjusted to carry the bag.

Click here to see more photos of the bag

May 2, 2009

ProTek High capacity LiPo packs

A Main Hobbies have released a number of new high capacity LiPo packs under their ProTek brand. First up is this 14.8V 5100mAh 4 cell 35C hard cased dual battery pack, which includes two integrated balance charge leads and a main power lead with a Deans style T-plug installed. Up next is a 5000mAh hard case pack with a 35C rating that includes bullet connectors for charging and balancing, and also includes a balance charge lead with a Deans style T-plug installed. This pack is thin enough to fit into all touring cars and off-road vehicles, and with the humps on the bottom will be secure in vehicles designed for side by side NiMH race packs. Finally is the 5200mAh 35C saddle pack which has ultra T-style connectors attached, and come with a 4-pin Align/E-Flite style balance connector. As with all the packs these are built using a hard plastic case that is required for use at ROAR sanctioned tracks and events.

Click here to see the other packs