Red RC » RDRP

March 29, 2017

RDRP B6 Titanium Lower Shock Screw Set

Revolution Design Racing Products have introduced a Titanium lower shock screw set for the Team Associated B6 and B6D buggies. It includes four lower shock mount screws made from high-quality titanium. The fasteners do away with the standard steel screws and they are of a unique design that only sports threaded sections where they are needed, while areas to which the lower shock eyelet bushings attach are of a plain design for improved durability and precision. The screw heads are also unique in the way that they feature dual 2mm and 5.5mm hex sections that allow to use 2mm hex or 5.5mm nut drivers to fasten or loosen the screws. Included in the set are two front and two rear shock mounting screws.

View more images here

February 14, 2017

RDRP RC8B3 machined Delrin shock parts

Coming from Revolution Design Racing Products are the RC8B3 machined shock parts, a direct replacement for the kit’s rod guides and lower O-ring bushings. Precisely machined from high-quality Delrin the parts improve the O-ring seal fit for optimised sealing, better shock rod guidance and a more efficient shock performance. The set includes four shock rod guides and four lower bushings, enough to equip all four shock absorbers of a car. The set is compatible to all 3rd generation RC8 kits including the RC8B3, RC8B3e, RC8T3 and RC8T3e.

View another image here

February 13, 2017

RDRP RC8B3 aluminium rod end balls

Revolution Design Racing Products have released a set of aluminium rod end balls for the Team Associated RC8B3 series of kits. The parts are machined from aircraft-grade 7075 aluminium and come hard-anodised for wear, meaning they will last longer while not being prone to corrode in unfriendly environments. An inner hex portion makes installing and setup changes easy. On top of this the balls save about 1g per piece compared to the standard steel parts. The rod end balls come in sets of eight and they are compatible to all 3rd generation RC8 kits including the RC8B, RC8B3e, RC8T3 and RC8T3e.

View another image here

February 9, 2017

RDRP RC8B3 brass rear weight

Made for the Team Associated RC8B3 is RDRP’s new brass rear weight. A quick and easy solution to add weight to the rear of the chassis, the CNC-machined part is made of high-quality brass material, it comes black anodised and attached to the RF suspension block using the kit’s screws. Adding weight in front of the rear axle greatly helps to gain traction on slippery surfaces while also making for a more plush ride over very rough terrain. The weight is compatible to all 3rd generation RC8 kits including the RC8B, RC8B3e, RC8T3 and RC8T3e.

View another image here

February 8, 2017

RDRP RC8B3 titanium shock mounts

Made for Team Associated’s 3rd generation 1/8th off-road vehicles are the new RDRP titanium shock mounts. Machined from high-quality titanium material for the lowest possible weight while keeping exceptional structural rigidity, the parts were designed to do away with the original steel mount and screw in place for a 1-piece solution that scrubs about 1g of weight per piece. On top of this the design also allows for easier shock angle changes as there is only a single nut to undo in order to slide the mounts out of the shock tower. All needed mounting hardware is included and the titanium shock mounts are compatible with the RC8B, RC8B3e, RC8T3 and RC8T3e.

View more images here

January 31, 2017

RDRP RC8B3 titanium pivot balls

Revolution Design Racing Products have introduced a set of titanium pivot balls for the Team Associated RC8B3 buggy. Made from high-quality material the titanium pivot balls scrub a good amount of weight compared to the kit’s steel parts while also being much less prone to corrode and wear, making them virtually a fit and forget. The titanium pivot balls are compatible to all 3rd generation RC8 kits including the RC8B, RC8B3e, RC8T3 and RC8T3e.

View another image here

January 26, 2017

RDRP RC8B3 titanium shock pins

RDRP have introduced a set of titanium shock pins for the Team Associated RC8B3. They are direct replacements for the standard steel parts and come machined from aircraft-grade titanium. Weighing in at only 0.85g per piece the shafts make for lower unsprung masses which results in greater suspension efficiency and thus improved overall performance. On top of this the shafts feature a recess in the button-style head for droop measurement purposes and they are highly corrosion resistant, meaning they not only look better for longer but they also perform at their best in wet track conditions. The pins come in sets of four to equip one full kit and they are usable on all of Team Associated’s 3rd generation 1/8th off-road kits including the RC8B, RC8B3e, RC8T3 and RC8T3e.

View another image here

January 2, 2017

RDRP RC8B3 aluminium chassis brace rear mount

Made for Team Associated’s 3rd generation RC8 1/8th off-road kits is RDRP’s new aluminium chassis brace rear mount. A direct replacement for the standard composite plastic part the connector between the rear chassis brace and the rear gearbox is made from high-quality aluminium and it comes blue anodised and laser-etched for cool factory looks and improved durability. On top of this the brace will make for more equal flex characteristics, leading to an improved overall performance of the vehicle. The brace is compatible to all RC8B3 and RC8T3 kits including the RC8B, RC8B3e, RC8T3 and RC8T3e.

View another image here