Red RC » RDRP

October 9, 2014

RDRP Ultra Motor Distance Plate Set

Revolution Design Racing Products introduce the new Ultra Motor Distance Plate Set that helps to fine-tune the weight distribution of a variety of vehicles such as in-line motored off-road buggies or touring cars with transversal motor position. The shims help to shift the motor forth and back or left and right in order to optimise weight distribution without the need for additional weights. On pan cars the plates also adjust the weight balance of the rear pod if needed. Motors with ultra long shafts can be re-shimmed to avoid any contact between the shaft and the battery pack or other equipment. The set includes a 1.0mm and one 2.0mm plate, both being made of black anodised aluminium with laser-etched logos.

Click here to view more photos

May 6, 2014

Markus Mobers joins Revolution Design

Revolution Design Racing Products announce the addition of multiple 1/12th scale Champion and RC legend Markus Mobers to their team. The newly crowned 1/12 Stock European Champion add to an already impressive team of the like of Christopher Krapp, Kaja Novotny and Elliott Boots. This is what Markus has to say about the deal:

Since the start of RDRP, I am a big fan of the project and want to help to extend the on-road product line with my experience. RDRP is simply art.

Source: RDRP [revolution-rc.com]

February 17, 2014

RDRP Ultra Glowplug Wrench

The Ultra Glowplug Wrench is the latest nitro tool release from Revolution Design Racing Products. The wrench is designed for the use with standard and turbo glowplugs, the main body is made from high quality spring steel and incorporates an 8mm nut driver for the plug while an O-ring equipped recession at the top end of the tool takes a spare glow plug, making the wrench the ideal companion for demanding qualifiers and finals. Laser-etched logos let the tool stand out while a sturdy cross pin makes tightening and undoing even tightly fitted plugs a breeze.

Source: RDRP [revolution-rc.com]

February 10, 2014

Revolution Design Ultra Flywheel Puller

Revolution Design Racing Products introduce the Ultra Flywheel Puller. The tool is designed for most 1/8th clutches and helps to separate the flywheel from the crankshaft without any damage. By clamping the black anodised aluminium fork behind the flywheel and turning down the shaft the flywheel is pulled away from the crankshaft without harming the flywheel, the crankshaft or the tool itself. The tool is also equipped with a 10mm nut driver that is ideal to tighten the clutch nut after fitting the flywheel. Both the black anodised 7075-T6 aluminium fork and the high quality spring steel shaft sport the RDRP logos for a factory look and easy identification.

Source: RDRP [revolution-rc.com]

September 19, 2013

RDRP DEX210 black aluminium shock towers

Revolution Design Racing Products announce the release of the black colour DEX210 aluminium front and rear shock towers. They are designed to replace the stock plastic shock stay with a cooler looking and more rigid solution. CNC-machined from 7075-T6 aluminium and coming anodised black for a more durable finish the RDRP shock towers do not break as the kit’s plastic tower and make for a more solid and therefore precise base for the shock absorbers. The black versions are a colour variant of the already existing gun metal coloured shock stays and both versions are available now.

Click here to view the rear shock tower

June 27, 2013

Revolution Design Racing Products Ultra wrenches

Revolution Design Racing Products introduced their long anticipated Ultra wrenches. The machined 7075 T6 handle allows a perfect fit to the drivers hands, without getting blistered fingers after hours of wrenching. The handle is black hard-anodised and sports the typical laser edged RDRP logo. The end cap in blue (for metric size) and red (for imperial size) indicates with a large letter the size of the wrench. The most important part of a good wrench is the wrench tip and the high grade quality spring steel tip allows for a long life span and a precise fit. A laser edged indication on the tip allows you a quick identification of the size.

View more details and images here

June 25, 2013

RDRP turn attentions to the RB6

Having released many great option parts for the Team Durango DEX210 option parts, Revolution Design Racing Products have announced that they are expanding to make a lot of new option parts for the popular Kyosho RB6 2WD Buggy. The new range of parts will kill the weak points of the RB6 and make it faster and stronger and it also allows allow for quick and easy adjustment of the weight distribution. Expect some releases in late August.

Source: RDRP [revolution-rc.com]

May 15, 2013

RDRP Durango machined 48DP main gears

New from Revolution Design Racing Products come machined 48DP main gears for Team Durango 1/10th vehicles. The gears are made from a special compound material for improved strength, lowest running noise and highest precision. Sporting machined inner holes to reduce weight and to make for a cool factory look the gears are available in 78T, 83T and 87T specifications.

Source: RDRP [revolution-rc.com]