Red RC » RDRP

July 8, 2021

Revolution Design T6.2 body mount stiffener set

Stadium trucks are fun to drive and durable, not least because the body protects the parts that are exposed on a 2WD buggy. Of course, this comes at a price, and stadium trucks bodies usually don’t last as long as their little brothers. For Team Associated’s latest entry to the category, help has arrived in form of the Revolution Design T6.2 body mount stiffener set. Precisely machined carbon fibre stiffeners brace the body mounts against the impacts of involuntary tough landings, thus reducing stress on the polycarbonate body. As a side effect, body clips tend to stay in place much better, which aids to solve another regular issue of stadium trucks.

View more images here

July 5, 2021

RDRP B6.3, T6.2, SC6.2 aluminium steering blocks

Add extra durability and precision with RDRP’s new aluminium steering blocks for Team Associated’s sixth generation of 2WD vehicles. Sharing the geometry with the kit’s 4mm offset plastic parts, they are a direct replacement without influencing your dialled set-up too much. The black anodised aluminium parts are labelled with laser-etched L and R marks, and of course the well-known RDRP logo. Silver chamfered edges round out the stealthy factory look.

View another image of the blocks here

June 17, 2021

RDRP B6.3 aluminium battery mount set

RDRP’s latest item addresses the needs of relaxed hobbyists and focused racers alike. The aluminium battery mount set both increases ease of maintenance and operation, and allows for more balanced chassis flex to support the design concept behind the B6.3’s all-new servo mount assembly. In addition, the combination of aluminium and carbon fibre parts adds to the professional look of your 6th generation Team Associated car or truck and accommodates shorty batteries of all capacities and sizes. No more searching for that nut driver when you are in a hurry to install a fresh battery just before your next heat.

View the complete set here

March 4, 2021

Revolution Design titanium front axle & clamping hex

Saving weight, adding durability, and increasing adjustment options is high on the list of every racer. The one-piece aluminium front axles of Team Associated’s B6.2 are very light already, but can be bent by hard impacts and offer no track width adjustment options as seen on the buggies of the competition. Their truck counterparts are made of steel for added durability, but still have a fixed track width and off-set, and increase unsprung weight. RDRP’s titanium wheel axles come with 5mm aluminium clamping hexes for the B6 series and 8.5mm versions for their stadium and short course truck brothers. Both axle types accept the readily available Associated 1/10th scale wheel hexes for even more variety.

View the axle sets here

February 11, 2021

RDRP T6.2 & SC6.2 hard front anti-roll bar set

Revolution Design have released this hard front anti-roll bar set for the T6.2 & SC6.2 (1.5/1.6/1.7mm). Although today’s stadium and short course trucks are based on low-centre-of-gravity platforms, available options still focus on dirt tracks. As a consequence, racers are either to improvise or will be unable to unlock their trucks’ full potential on high-grip surfaces. With their wide front tires, trucks can be a handful on carpet and Astroturf, because the anti-roll bars on the market are not up to the task of taming down your front end, until now that is. RDRP has come up with a set of three anti-roll bars with high-grip racetracks in mind. Available at an economic price, this is a welcome option for everyone racing an Associated 6 series truck on carpet or Astroturf.

View the full set here

February 9, 2021

RDRP B6.2 -1° D suspension block

RDRP presents their new -1° D suspension block for the Associated B6.2 2WD buggy. With this item, it is possible to either reduce rear toe-in for less rolling resistance and more corner speed on high-bite surfaces such as carpet and Astroturf, or to run your rear arms in a narrower position for more roll on slippery tracks. Machined from durable aluminium and black anodised, it has chamfered and polished edges for looks and of course is compatible with the full range of Team Associated B6.2 pill inserts.

View the mounted suspension block here

July 23, 2020

RDRP B6.2 +3mm LCG 7075 aluminium chassis

Available now from Revolution Design Racing Products is the +3mm aluminium chassis for the ultra-popular Team Associated B6.2 2WD buggy. It offers an optimised length for an easier to drive car especially in high-bite track conditions such as EOS carpet and astro turf, allowing to pull faster single laps while offering greater consistency at the same time. The chassis has the same wheelbase specification as the AE91850 B6.2 +3mm chassis and it is machined of aircraft-grade 7075 aluminium for strength and optimised flex characteristics while the black anodised surface ensures high durability and factory looks. Machined silver edge details and laser-etched logos ensure surface protection on the track and visual impact in the pits. What makes the chassis also stand out is a new low-profile motor position that is accessible through a cut out in the chassis and the included 7075-T6 motor plate. Both the chassis and motor plate work exclusively with the laydown gearbox and in addition to the low profile motor position, the main plate also uses a lowered battery position for an even lower overall centre of gravity and cool looks with machined slots left and right of the battery pack compartment. The chassis is compatible with most “under servo” and “under electronics” weight sets.

View a list of the features and more images here

May 13, 2020

RDRP B74 72T & 78T 48 pitch machined spur gears

New from Revolution Design Racing Products are precision machined Delrin spur gears that are a direct fit on the center differential of the Team Associated B74 buggy. Thanks to the high-quality material they offer greatly improved durability especially when running high-powered modified motors. The precise manufacturing also ensures the gears run very true which increases the drivetrain efficiency while keeping the noise level at a minimum. The gears are available in 72T and 78T specification for both stock and modified racing and they fit the standard Team Associated and also Revolution Design’s #RDRP0492 aluminium center differential case.

View more images here