Red RC » Revolution Design

May 13, 2026

Revolution Design B84 DJ Front Driveshaft Set

New from Revolution Design comes this DJ Front Driveshaft Set specifically engineered for the Team Associated B8 and which is also offered in a lightweight option intend for Stock Class racing. The Double Joint (DJ) driveshafts eliminate front-end vibrations at full steering lock, providing a noticeably smoother and more consistent feel on the track. For Modified Class racing the shafts are built to handle the massive power of modern modified motors while maintaining a slim weight of just 23 grams per pair. The Lightweight Front Driveshaft Set complete with ‘Stock’ branding is specially optimised for 10.5T and 13.5T Stock Racing. Weighing in at only 21 grams per pair, 2 grams lighter than the standard version, these shafts further reduce rotating mass at the front axle. This results in snappier acceleration and maximum drivetrain efficiency.

View Stock driveshafts here

April 22, 2026

RDRP B84 MonoCore 7075 Aluminum Chassis Set

Revolution Design Racing Products (RDRP) has released this MonoCore Chassis Set for the Team Associated B84 1:10 4WD Buggy. It is the result of extensive development in collaboration with the RDRP race team who was given the goal to create a chassis that is not only faster, but significantly more durable than standard components. Compared to the original, the chassis layout has been completely revised. The front and rear sections, where the gearboxes are mounted, have been widened. This adjustment increases overall strength while also improving the flex characteristics of the car. The result is more consistent handling and increased grip in critical sections of the track. Special attention has been given to the critical front kick-up area. While conventional designs often reach their limits here, RDRP introduces an innovative solution in the form of the included B suspension mount which is made from high-strength steel and is secured using a central screw combined with two precision locating pins. This construction distributes forces more effectively, eliminates weak points, and ensures exceptional durability even under hard landings. Another highlight is the integrated carbon ESC plate that allows you to remove or replace the ESC quickly and easily without having to scrape double-sided tape from the chassis. Manufactured from high-grade 7075-T6 aluminium, the chassis delivers the perfect balance of weight and rigidity. Visually, it stands out with the signature RDRP finish of deep black anodising combined with elegant silver chamfered edges.

View more images here

February 27, 2026

RDRP B84 Vented Decoupled Slipper Plate Set

Revolution Design Racing Products (RDRP) has added this Vented Decoupler Slipper Plate Set to its range of upgrade parts for the Team Associated RC10B84 1:10 4WD Buggy. It is designed to keep your decoupled slipper working more consistently from start to finish, the vented design improves cooling, helping reduce performance drop off over a complete run and delivering a smoother, more repeatable slipper action. At only 6.5 grams, the set is also 2.1 grams lighter than the original parts, supporting a more responsive feel without sacrificing reliability.

View more images here

February 26, 2026

Revolution Design B84 Lightweight Center Driveline Set

Revolution Design Racing Products has designed this Lightweight Center Driveline Set for the Team Associated B84 to reduce rotating mass and overall drivetrain weight for faster acceleration and a more responsive feel. With 55mm & 102mm shafts, the Forward Motor Position version also unlocks a new layout by letting you run the motor in the forward position together with the centre differential, a combination that was not possible before. Ideal for both Stock and Modified classes, with durable 7075 aluminium components finished in hard anodising for long wear. With 61mm & 94mm shafts, the Rear Motor Position option is intended for running the motor in the rear position while using the centre differential. Like the FMP set, it is race ready for both Stock and Modified classes. The completes sets weigh 15.25 grams.

Source: RDRP [revolution-rc.com]

February 19, 2026

Revolution Design XB2 Alu Bulkhead +/-3°

More new Xray option parts from Revolution Design Racing Products with the introduction of this +/-3° Aluminium Bulkhead for the XB2 1:10 2WD platform. This CNC machined part replaces the stock plastic bulkhead and adds extra rigidity and precision where it matters most. Machined from high strength 7075-T6 aluminium, it combines low weight with excellent durability. The black anodised finish with silver chamfered edges delivers a clean race look. Weighing in at 12 grams, the +/-3 degree option, which compatible with both the XB 25 and 26, allows additional setup freedom to fine tune front end feel for different track conditions.

View additional images here

February 17, 2026

Revolution Design 1:10 ULTRA Wing 6.5″ and 7.0″

Revolution Design has a new 1:10 wing, the Ultra series developed for the latest generation of 1:10 electric offroad buggies. The carefully sculpted profile delivers a planted yet free rotating rear end, more corner speed and improved forward drive while keeping jumping and landing behaviour predictable. All Ultra Wings are molded from high quality clear polycarbonate and come fully pre cut so you only have to drill the mounting holes. Fine trim lines along the trailing edge allow for easy aerodynamic tuning. Designed for medium to high grip indoor and outdoor tracks, the range offers two widths and three material thickness options so you can always choose exactly the right balance of rotation, stability and durability. Developed together with our team driver and IFMAR Worlds A finalist Joona Haatanen, the Ultra Wing delivers race proven performance for serious 1:10 buggy racing.

View additional images here

November 28, 2025

Revolution Design 64dp Ultra Spur Gears

New from Germany’s Revolution Design comes their new 64dp Ultra Spur Gears. Delivering crisp, efficient drivetrain performance for 64dp applications, the precisely cut tooth profile reduces friction and noise. The gear runs exceptionally true for consistent mesh and long life, and the specially optimised polymer blend offers an ideal balance of stiffness and wear resistance. Lightweight, the open-spoke design helps reduce rotating mass and the clean molded finish ensures a stable fit on standard hubs

View more images here

November 20, 2025

Revolution Design B84 Adjustable Ackermann Plate

In another addition to its line-up of aftermarket up grade parts for the Team Associated B84, Revolution Design has released this Adjustable Ackermann Steering Plate. Used by Marcus Kaerup to win the 2025 IFMAR World Championships in Australia, compared to the standard steering plate this version allows precise Ackermann adjustment. The rearward hole matches the stock geometry. Switching the insert to the forward hole moves the ball stud 1 mm toward the front, increasing steering response on corner entry. Machined from high grade 7075 aluminium and finished in RDRP’s signature black anodising with silver chamfered edges and a laser etched logo, it adds both performance and style to your B84.

View more images here