Red RC » Revolution Design

May 13, 2014

RDRP RB6 aluminium rear suspension mount set

RDRP RB6 aluminium rear suspension mount set-1

The RDRP RB6 Suspension Mount MM-RM2 Set allows to change the rear toe-in setting of the Kyosho RB6 buggy, RT6 stadium truck and SC6 short course truck within seconds. Included in the set are CNC-machined and black anodised 7075-T6 aluminium suspension mounts, designed to replace the stock plastic mounts with more durable and highly adjustable parts. The front RF2 mount mimics the stock geometry while the rear RR2 mount, included for both mid and rear motor vehicles, makes use of delrin inserts which, depending on the orientation, make for 2 degree, 3 degree or 4 degree toe-in settings to adjust the overall traction and side bite available from the vehicle’s rear end.

Click here to view the parts in place

April 30, 2014

RDRP RB6 front aluminium bulkhead

Revolution Design Racing Products introduce a front aluminium bulkhead for the Kyosho RB6 buggy. The part is designed to replace the kit’s plastic bulkhead with a more durable and more precise item, with the bulkhead being machined from high quality 7075-T6 material. The part not only makes for a solid base for the steering levers and the front shock tower but it also does away with ripped-out ball studs, adding additional durability. Designed for the RB6 the bulkhead also fits the RT6 stadium and SC6 short course truck and it comes black anodised and laser-etched to match with the remainder of the RDRP option parts.

Click here to view a photo of the part in place

April 28, 2014

RDRP RB6 brass front suspension block

Revolution Design Racing Products introduce a brass front suspension block for the Kyosho RB6 buggy. The part is designed to replace the kit’s plastic bulkhead with a more durable and more precise part that also adds 32g of weight to the front end of the RB6 buggy, RT6 racing truck and SC6 short course truck. Machined from high quality material and coming laser-etched for easy identification the part allows to use 25 degree or 30 degree of A-arm kick-up in order to alter the car’s steering characteristics. On top of that the brass material greatly improve the robustness of the front end while the precise manufacturing adds to the overall appearance.

Click here to view more photos

March 12, 2014

Revolution Design RB6 slipper plate set

Revolution Design Racing Products introduce the RB6 Slipper Plate Set for Kyosho’s RB6 2WD buggy and RT6 2WD stadium truck. The plates are CNC-machined from 7075-T6 aluminium, come hard anodised and with a hardcoated surfaces for added rigidity and super long life. Being of a vented design they make for a more consistent and reliable slipper action in every racing condition. They sport laser-etched RDRP logos and are available now.

Click here to view a photo of the parts in place

February 11, 2014

Revolution Design Ultra Flyheight Tool

Revolution Design Racing Products introduce the Ultra Flyheight Tool for 1/8th off-road vehicles. Made from aircraft-quality 7075-T6 aluminium the tool incorporates a flywheel tool, a clutch gap gauge and a ride height gauge. The shape of the tool allows to securely fasten 3-pin and 4-pin flywheels while fastening the clutch nut and therefore it is the ideal combination with the RDRP Ultra Flywheel Puller. Once the flywheel and the clutch bell are fitted the axial play can be measured and adjusted using the clutch gap gauge. A stepped slot measures the axial clutch bell play between 0.3mm and 0.9mm in 0.1mm increments. On top of that helps to measure the chassis ride height in a range of 20mm up to 40mm by simply placing the tool underneath the chassis plate. 1mm increments make for a precise adjustment while the black anodising and white laser-etched markings give the tool a factory look.

Source: RDRP [revolution-rc.com]

February 6, 2014

RDRP RC10 Classic fibreglass option parts set

Revolution Design Racing Products introduce this fibreglass option parts set for the Team Associated RC10 Classic kit. The set contains a new front and rear shock tower, both of which are of an updated design and offer additional shock mounting positions compared to the stock items. Also included is a large battery mount for a more secure battery fitment and also a transmission brace that replaces the unsightly nylon plate of the original kit. All parts fit without modification on the RC10 Classic and all vintage 6-gear RC10 kits. The shock towers and battery brace also suit all RC10 with Stealth transmission.

Source: RDRP [revolution-rc.com]

February 4, 2014

RDRP RB6/RT6 battery positioner sets

New from RDRP come two new battery positioner sets for the Kyosho RB6 buggy and RT6 stadium truck. First up is the aluminium variant that is only slightly heavier compared to the kit’s plastic parts. They are designed to enhance the look while offering higher rigidity at the same time. Made from 7075-T6 aluminium the C-shaped parts sport laser-etched graphics and are usable for standard length, shorty and saddle pack battery configurations alike.

Click here to continue reading

February 3, 2014

Revoltion Design Racing Products Ultra Body Reamer

Revolution Design Racing Products introduce the Ultra Body Reamer. Making use of the proven RDRP tool handle for effortless usage the reamer is equipped with a high-quality and very sharp spring steel reamer tip that sports a stepped design allowing to drill holes from 3mm up to 11mm in diameter. A vented safety cap protects the tip as well as your hands and other tools in your pit bag. The black anodised 7075-T6 aluminium handle sports the proud Revolution Design Racing Products logo and perfectly matches with the other high-quality RDRP tools.

Source: RDRP [revolution-rc.coom]