Red RC » Robitronic

March 9, 2012

Robitronic Cube BL v1.2 controller

Robitronic have updated their Cube BL competition brushless speed controller with the latest v1.2 firmware that includes a special Boost 0 “blinky class” program, added motor reverse rotation selection, and auto-roll as well as optimised low-voltage protection and increased auto-brake values. The 2S LiPo-compatible controller is useable with motors as low as 3T star wound and customers who already own a “v1” version can have their controller updated free of charge by sending them to Robitronic.

Source: Robitronic [robitronic.com]

January 27, 2012

Robitronic 5500mAh 3S 60C LiPo pack

Robitronic have added this 5500mAh 3S 60C LiPo pack with hard case to their battery line up. The ideal LiPo pack for monster trucks, truggys and buggys, it features the newest generation internals with extra low resistance to keep higher voltage for the complete run. Due to the small dimensions of the battery it fits perfectly under most bodies and the battery comes equipped with a convenient “T” connector and comes pre wired with 10 cm long, super flexible 4mm² silicon cable EH Type balance connector.

Source: Robitronic [robitronic.com]

December 4, 2011

Robitronic aluminium servo-arms

Robitronic now offers a new lineup of sturdy and ultra-reliable servo-arms. They add a clever clamping mechanism that grips the servo’s spline with enough force, so that you’ll never lose or strip a servo arm again. Even if the servo’s spline screw works itself loose, you can safely keep on racing since the clamp-style servo arms will still provide a firm grip. Laser-etching tells you the spline indexing, (23T, 24T, 25T) they’re built for.

Source: Robitronic [robitronic.com]

November 18, 2011

Robitronic Dirtbags

The Robitronic Dirtbags help to keep the trunk or back seat clean as they are designed to enclose the most dirty parts of off-road vehicles such as the tyres and chassis. The synthetic fabric the bags are made of are easy to clean with water and soap and even prevent water and oils so sip through. The bags are available in four sizes for Crawlers, 1/8 scale buggies, 1/8 scale truggies and monster trucks as well as large scale vehicles.

Click here to view the sizes

October 23, 2011

Robitronic 6000mAh 50C LiPo pack

Robitronic have released their newest generation of LiPo racing pack, this 6000mAh 50C 7,4V battery. The LiPo is securely packed into a impact resistant hard case and comes pre wired with ‘T’ Connector for the lowest contact resistance. A XH type balancer is also supplied.

Source: Robitronic [robitronic.com]

September 16, 2011

Robitronic Mantis updated version

Robitronic release an updated version of their Mantis 1/8 scale nitro 4WD stadium truck. The new version comes with a 2.4GHz 16-model memory transmitter, genuine Savöx SC-0252 Servo steering and throttle servos, receiver battery pack and charger, a new 4.6cc 8-port big block engine, L/R thread turnbuckles all round, full ball bearings and front and rear anti-roll bars as well as big bore shock absorbers with 3.5mm piston rods.

Click here to view more pictures

August 26, 2011

Robitronic Expert LD16z & LD108z chargers

Robitronic have extended their line of Expert chargers by the LD16z and LD108z. The Expert LD 16z features an intelligent charging circuit enabling the unit to simultaneously detect even multiple errors like a broken cell, user error etc. and hence provide safe charging. Featuring a built-in AC adapter the charger is usable with 11-18V and 110-240V, incorporates a cell balancer for LiPo batteries, different charge and discharge programs and comes including power and several charging adapter wires.

View more information here

August 5, 2011

Robitronic Razer BL 1/8 BL motors

Robitronic release a total of four new electric brushless motors. The Razer BL and Razer Pro BL share the same 42×68.5mm dimensions and while the the normal version is available as 6-pole 2150kv/7T and 1900kv/8T variant, the Pro comes as 2400kv/6T and 2100kv/7T 6-pole/18-slot version for even more power and efficiency. All motors come with a black anodised and highly ripped can with red front and back plate – the Pro variant additionally features three milled out section in the front plate for easy identification.

Click here to view the other new motor