November 8, 2022

RSRC Kyosho MP10 wing spacer

RSRC, the company of multiple European 1:8 Offroad Champion Reno Savoya, has released this wing spacer Kyosho MP10. Aerodynamics have taken a big role in 1:8 buggy for some time now with bodies and wings a major change for the car’s behaviour or setup changes. RSRC has designed the wing spacer in the lighter and most resistant material in 3D printed TPU which has for rubber-like flexibility.  The wing spacer is recommend for use on all tracks.  It brings a lot of aerodynamic downforce at high speed making the car more stable.  In addition, the rotation at low speed is increased with the weight of the wing sitting higher.  The spacer comes with M3x20 screws included.

Source: RSRC [rsrc.biz]


February 16, 2022

RSRC MP10e carbon fibre fan mount

New to RSRC’s range of products is this carbon fibre fan mount for the Kyosho MP10e. The best way to keep your motor running efficiently and durable is to affix a fan on top for optimal cooling even in cold weather. The new fan mount is made from 1.5mm carbon fibre, is light and robust and compatible for all fans with dimensions 30x30x10mm. Requires the RSRC carbon fibre centre differential plate which is sold separately.

View the fan mount here


September 20, 2021

RSRC hex & nut driver sets

RSRC, brand of multiple European Champion Renaud Savoya has updated their line of unique tools with new colours. The tools are now all available with a red & black handle and feature a gold 100mm long titanium nitride coated tip. The handle’s unique design ensures maximum torque and comfort and a full range is a available with hex tips available in 1.5mm, 2.0mm, 2.5mm, 2.5mm ball and 3.0mm with the nit drivers coming in 5.0mm (M2.5), 5.5mm (M3) and 7.0mm (M4).

View more detail shots here


July 21, 2021

RSRC carbon fibre setup board

RSRC are extending their line of products with this new carbon fibre setup board. Compatible for all 1/8 and 1/10 RC cars and trucks it has been produced from real 3mm carbon fibre, reinforced with fibre glass inside. Giving your pit area that racing/factory look, the board offers a flat surface to control all the settings of your RC car such as camber, geometry, ground clearance, droop etc. The board is finished off with the RSRC engraved logo and glossy finish.

View another image here


November 23, 2020

RSRC MP10e diff carbon plate & cable holder

RSRC are extending their line of products with a new option part for the Kyosho MP10e. Secure the cables on the MP10e with this 2.5mm carbon fibre plate which is a direct bolt on replacement for the stock centre bulkhead plate. Thanks to the machined Delrin cable holder your cables will be held neatly together. Included in the kit is the carbon diff, cable holder and two M3x8mm button head screws.

Source: RSRC [rsrc.biz]


February 3, 2020

RSRC Treatme traction compound

Coming from Renaud Savoya’s RSRC brand is the are Treatme off-road tyre traction compound. Developed to improve overall grip and traction in low-bite conditions, as they can occur in wet weather, cold temperatures or on an oiled track, the tyre sauce comes in handy on tracks such as the ones in Padova, Reims or Montpellier. The chemical easily penetrated the tyre rubber and lasts for several runs, doing away with the need to soak the tyre before each run. It comes in a handy 150ml spray-on bottle and it is of a low-odour formula.

Source: RSRC [rsrc.biz]


July 18, 2019

RSRC 8ight-X carbon fibre chassis reinforcement

Coming from Renaud Savoya’s RSRC brand is a carbon fibre chassis reinforcement for the TLR 8ight-X buggy. Cut from 2.5mm material the brace replaces the standard aluminium chassis rib brace for a softer variant that improves grip while making for an easier to drive car – especially in bumpy track conditions. Not included with the brace comes the needed hardware in the form of four M3x10mm screws and four nylon stop nuts.

Source: RSRC [rsrc.biz]


June 3, 2019

RSRC lightweight setup board

Coming from Reno Savoya’s RSRC brand is a new lightweight setup boars suitable for both 1/8th and 1/10th scale classes. Made of lightweight PVC material the board weighs in at only 800g while measuring 345x545mm. The dimensions allow to fit the board into most hauler bags and it sports the “Shark’s” signature graphics and colours.

View another image here