Red RC » Schelle Racing Innovations

July 22, 2014

Schelle B5M aluminium rear ballstud mount

Schelle Racing Innovation’s latest option part for the Team Associated B5M mid motor buggy is this aluminium rear ballstud mount. The lightweight mount adds durability in addition to increased tuning options as along with standard kit width mount holes – the middle hole on the Schelle part – there are option inner and outer holes which give added fine tuning for the upper links. The mounting bracket is available in either black or blue anodised versions.

Click here to view another photo

June 19, 2014

Schelle B5 series alloy topshaft & ceramic bearings

Schelle Racing Innovations have new option parts for the Team Associated B5 and B5M available in the form of an aluminium topshaft and ceramic transmission bearing sets. Starting with the topshaft, the lightweight part is precision machined for improved efficiency and a quieter running gearbox. Weighting in at only 4.8g it scrubs around 9.1g of rotation mass compared to the stock part for quicker spool-up and improved braking performance. The shaft is machined from high-quality 7075 aluminium and fits both the B5 and B5M.

Click here to continue reading

May 23, 2014

Schelle RB6 ball-raced steering rack & chassis wrap

Schelle RB6 ball-raced steering rack & chassis protector

Schelle Racing Innoovations introduce two hop-ups for Kyosho’s 2WD Ultima series vehicles. First up is a ball-raced steering rack for the RB6, RT6 and SC6. The ball bearing construction eliminates slop from the pivot bushings while the design allows for additional Ackermann adjustment fore-aft as well as a wide steering pivot option. Widening out the inner bellcrank pivots shortens the steering link rod to better match the camber gain in the suspension and in testing Schelle found that the wide pivot setting produces a more predictable steering feel as the chassis leans in the turns. The second new part is a pre-cut chassis protection decal for the RB6. The sticker is made by UpgradeRC, sports the Schelle logos and it protects the chassis bottom from becoming excessively scratched on abrasive surfaces.

Click here to view the chassis sticker

May 15, 2014

Schelle B5 series aluminium shock standoffs

Schelle Racing Innovations introduce a set of aluminium shock standoffs and bushings designed for the use with the Team Associated B5 and B5M buggy. The standoffs replace the stock units and add more stability with a wide base and support for the mounting screw, as well as a tighter shock cap fit which now rides on machined delrin bushings. Although designed for the B5 the parts will also fit the Kyosho RB6 when used with a longer M3x22mm shock mount screw. Each set contains four standoffs and four bushings and they are available now.

Click here to view photos of the parts in place

March 28, 2014

Schelle Nova slipper clutch for AE & TLR kits

Schelle Racing Innovations introduce the Nova slipper clutch designed for the use with many Team Associated and TLR vehicles. The original 3-plate clutch was released back in 2012 and now Schelle has the latest incarnation of Kurt Wenger’s design available. It is a direct fit onto the B5, B5M and TLR 22 2.0 and solves problems kit clutches can have such as degrading and lock-up. In addition, it is smaller and weighs less making it ideal for stock racers while also offering up to 20 percent more torque capacity. The Nova sets include 2 white and 2 red slipper pads and a tuning guide to help racers learn how to tune the clutch for different conditions from slick to astro-turf. The clutches are available as Stock set including 72T and 76T spur gears, as Buggy kit including 78T and 81T geas and as SC and Truck specific set including two 84T main gears.

Source: Schelle Racing Innovations [schelleracing.com]

February 28, 2014

Schelle AE 12mm shock & turnbuckle tool

Available from mid-March is this Schelle tool for Team Associated’s 12mm big bore shocks. Making use of several machined slots and cut-outs the tool helps to lock and undo the lower shock caps, moulded or aluminium upper shock caps, and it also holds 4-40 Factory Team or Schelle’s own aluminium shock stand offs. On top of that the tools allows to adjust Factory Team, JConcepts and Lunsford turnbuckles, with angled turnbuckle slots giving more tool and hand clearance when working on the car. The part is CNC-machined from high-quality aluminium and comes black or blue anodised in a resealable snap case.

Click here to view the part in use

February 8, 2014

Schelle 7mm and 11/32″ T-handle wheel wrenches

Schelle 7mm and 11/32" T-handle wheel wrenches

Schelle Racing Innovations introduce two new wheel nut wrenches for metric 7mm and imperial 11/32″ hardware. The 2-piece billet aluminium wrenches are ideal to fasten and remove the often hard to handle serrated wheel nuts on 1/10th vehicles. The tools are black anodised, come with a laser-etched Schelle logo and the nut driver tips are of a replaceable design meaning you can easily swap between your metric and imperial cars by buying one tool and a second tool tip.

Click here to view more photos

January 23, 2014

Schelle Racing Innovations – Introduction

Former Team Associated and Avid engineer Kurt Wenger introduce Schelle Racing Innovations. Lead by Chief Engineer Wenger, a core group of talented individuals have come together to form Schelle with specific goals and visions for enhancing the R/C experience for enthusiasts. Expect the first product release for February 2014.

Source: Schelle Racing Innovations [schelleracing.com]