Red RC » Shepherd

February 2, 2010

Shepherd introduce tire range

Shepherd Micro Racing have released their latest product line, Shepherd Tyres. In cooperation with a premium Italian manufacturer they created this new line of on-road foam tyres. Shepherd Tyres offer excellent grip combined with low tyre wear with the 1/8 scale tyres fitting on Velox, Mugen, Kyosho and Serpent OS2 adapters, while the 1/10 scale rims have 0mm off-set. For 1/12th scale pancars two different types of foam are available, carpet and asphalt and all tyres can be ordered on white standard rims and special lightweight rims. Available through the world-wide distribution network soon.

Source: Shepherd [team-shepherd.com]

January 28, 2010

Shepherd Velox V8 2010

Shepherd have announced the release of the Velox V8 2010. The makor change is that the 2009 pulley set will replace the standard pulleys in the kit. Due to the improved teeth design the pulleys reduced the drag significantly, while small holes in the washers release the dirt and keep the pulleys clean for a long time. The small 16T pulley was replaced by an 18T pulley and the 24T pulley on the one-way axle was replaced by a 27T pulley. This results in less friction and a much longer lifetime for the new front belt. The new lightweight design of the pulleys guarentees an extremly good true running and reduces virbations to a minimum.

Source: Shepherd [team-shepherd.com]

January 20, 2010

Shepherd Velox V8 rear body mount extension

New from Shepherd are these rear body mount extensions for the Velox V8. Due to the design of current 1/8th scale bodies and the allowed riding height many racers raise the rear body mount to increase the angle of the body as well as the downforce. With the new easy to install aluminium extension it is very comfortable to adjust the height of the rear body mount. Within a few moments the height can be changed and different setups can be tried. The set includes the aluminium extensions, body clips and extra long nylon screws.

Source: Shepherd [team-shepherd.com]

December 31, 2009

CSO Racing Velox V10 chassis & pullies

New from CSO Racing for the Shepherd Velox V10 is this new chassis plate and range of pullies. First up the chassis, which has been CNC machined from a 3.1mm thick slab of 7075 T6 aluminium and further hard coated for increased durability. Next up is a full range of drive pullies for the V10, including the 18T, 19T, 20T, 25 & 27T, which are also made from 707 T6 aluminium and hard coated, and feature holes in the side walls to allow dirt and debris to come out of the teeth, increasing the life of both the pulley and the belt.

Click here to see the range of pullies

December 27, 2009

CSO Velox V10 option parts

More new products from CSO, this time for the all new Shepherd Velox V10. For the 2-speed gearbox, there is a new lightweight 2 speed shaft that has been hollowed out to reduce overall weight while retaining its strength, while at the heart of the gearbox itself there is a new 2-speed adapter that has been made from Aircraft grade titanium for light weight, long durability and high strength. Finally there is also a new middle shaft, which too has been made from 64 titanium for extra weight benefits without sacrificing strength.

Source: CSO [cso.com.hk]

November 13, 2009

Shepherd Velox V10 1/10 scale 200mm chassis

Shepherd Micro Racing are pleased to announce the release of the new Velox V10 1/10 scale 200mm chassis. Designed with the help of current World Champion Daniele Ielasi, the car has already been proving its performance on tracks around the World, finishing runner up at this year’s ROAR Nationals in the hands of Josh Cyrul and winning the competitive Asian Cup in Bangkok driven by Jilles Groskamp. Seen for the first time as a one-off prototype at the 2009 International Toy Fair in Nuremberg, the chassis has undergone a lot of fine tuning in preparation for its public release. Shepherd Micro Racing’s Velox V10 is packed with loads of innovative features, most seen for the first time on a 1/10 nitro on-road car. First and foremost the chassis is equipped with Shepherd’s innovative ‘Direct-V-Brake System’ (DVB System) that sees the brake discs sit directly on the rear differential allowing for a more precise feel without the fear of brake fade during a run. Different from current designs that sport a single brake disc on the middle layshaft, the V10’s DVB System sits directly on the rear bulkhead close to the chassis’ centre line for optimised weight distribution.

Click here for more information and photos

November 3, 2009

Shepherd Racing decal sheets

Shepherd have presented their new 125x232mm decal sheets. Each sheet sheet now features a separate color which allows racers to only order the color that suits best to their individual body painting. The decals are fuel resistant and sport the Shepherd Micro Racing logo as well as the ‘ram’ head.

Source: Shepherd [team-shepherd.com]

October 26, 2009

Shepherd High Performance Diff oils

For the soon to be released Velox V10, Shepherd have already released their new range of diff oils. Made from premium raw materials, Shepherd high performance oil is manufactured according to their specifications by one of the leading silicone suppliers. Due to a special heat resistant formula the performance wont be influenced by temperature changes and additionally each batch is laboratory controlled to always ensure the same performance. For easy identification the industry standard cSt gives precise information about the viscosity. The uniquely colored labels make it even easier to find the correct bottle in the tool box. The oils are available in 60.000 cSt, 80.000 cSt, 100.000 cSt and 150.000 cSt.

Source: Shepherd [team-shepherd.com]