Red RC » T-Works

November 17, 2025

T-Works MP11 Rear Brace Mount | Steering Arms

Continuing to expand its offering of aftermarket parts for the new Kyosho MP11 1:8 Buggy platform, T-Works has released an Aluminium Rear Brace Mount, and Steering Arms in both carbon or aluminium options. Machined from 7075-T6 Aluminium and finished with a special black anodisation process for strength and hardness, the brace mount enhances the rigidity of the buggy’s rear section, improving cornering performance. The Aluminium Steering Arms enhance structural rigidity, significantly upgrading deformation resistance and impact durability while the Carbon version are lightweight yet high-rigidity, delivering more precise handling.

View more images here

November 12, 2025

T-Works Precision Shock Pliers

Following their recent introduction of their Multi-purpose Pliers, T-Works has released this Precision Shock Pliers. Made of high-quality aluminium and finished in black with silver edge finishing it weighs approximately 74.5 grams and has a total length of about 174mm. Integrating multiple functions in one compact tool this makes it a compact tool. It features a Shock-shaft plier that is equipped with adjustable 6-9mm width clamps so you simply insert the shock absorber core to easily adjust its width. The is a Ball End Installation/Removal and built-in ball bearing installer/remover for convenient handling of ball bearing components. The Shock Absorber Tube Clamps features two clamps (one large, one small) designed for installing and adjusting shock absorber tube caps. The Shock-body holder includes 1 replacement 2mm ball bearing installation/removal pin. You can replace the original pin to handle small-hole ball bearings.

View more images here

November 7, 2025

T-Works Multi-purpose Pliers

In another new addition to its tool line-up, T-Works has released this Multi-purpose Pliers. Made from high-quality aluminium alloy, featuring a black finish complemented by chamfered edges. Weighing in at approximately 71 grams and with an overall length of around 151mm, the pliers is portable and easy to operate, integrating multiple functions in one. It allows you to carry out Shock Absorber Core operations, it is equipped with 2-3mm/3.5-4mm shock absorber core clamping positions for stable holding. Additionally, it has 4mm/5mm shock absorber core detection positions—simply insert the core to check if it is bent. Moreover, it can fix plugs to assist in soldering operations. The pliers is equipped for Ball Installation/Removal, coming with a built-in ball installer/remover for convenient handling of ball components.

View more images here

November 3, 2025

T-Works MP11 1-Piece Engine Mount Plate

T-Works has released more new option parts for the Kyosho MP11 adding this 1-Piece Engine Mount Plate as well as a B Mount and C Mount for the new 1:8 Buggy platform. Made in 7075-T6 aluminium alloy, with a gold-black surface treatment and exquisite reverse edges, the 1-Piece Engine Mount Plate’s integrated structure can enhance the rigidity of the base plate and improve operational stability. The included fixing screws make installation even easier. Both made of 7075-T6 aluminium alloy and finished with chamfered edges, the B and C Mounts are a direct replacement for original kit mounts enhancing both appearance texture and structural stability.

View more images here

October 22, 2025

T-Works Multi Purpose Tyre Puncher

New from T-Works comes this Multi Purpose Tyre Puncher. Integrating multiple functions these include a Tire/Foam hole puncher. This comes with a default 4mm hole diameter, and is equipped with 3mm/3.5mm drilling heads and 2 replacement rubber gaskets to meet different hole-drilling needs. It also has a Shock-shaft pliers equipped with 3mm/3.5mm/4mm shock absorber core clamping positions for stable holding. Additionally, it has 2mm/3mm/3.5mm/4mm/5mm shock absorber core detection positions – simply insert the core to check if it is bent. It can also hold plugs to assist in soldering operations. Another function of the tool is the Shock-cap install/remover. Provided with multi-specification shock absorber cover installation/removal holes (4mm/4.5mm/5mm/5.5mm/7mm) to fit various models. Finally there is a built-in ball bead installer/remover for convenient handling of ball bead components. Made of high-quality aluminium and finished in black with silver edge finishing it weighs approximately 112.8g and has a total length of about 78mm, making it portable and easy to operate.

View more images here

October 20, 2025

T-Works MP11 CF Center Gearbox Plate

New from T-Works for the Kyosho MP11 1:8 buggy which was released in July comes this carbon fibre Center Gearbox Plate and Upper Plate. Made from high-quality carbon fibre and coming with precision flanged ball bearings, the gearbox plate is a direct replacement for the plastic kit plate and combining lightweight properties and high toughness it reduces the overall buggy weight. The Upper Plate reduces vehicle weight burden and enhances handling flexibility and requires no additional modifications for mounting.

View more images here

October 2, 2025

T-Works Tool Organiser Stand

New from T-Works comes this CNC machined aluminium Tool Organiser Stand. Features multi-sized holes, designed for storing screwdrivers, electric hex tools, hole openers, hex wrenches, hex sockets and other tools, it is also equipped with inner rings of 18mm/20mm inner diameter. Users can use the inner rings according to the size of tool handles, which is suitable for popular tools on the market. While the stand helps keep your workbench more organised and tidy, it also has a magnetic tray which can hold body clips, screws, nuts and so on. There are electric tool storage holes on the left side, which can hold 6 electric tools at the same time.

View more images here

October 1, 2025

T-Works TC8 6mm Bearing Wheel Hub Axle +0.5 | +1mm

T-Works has produced this Bearing Wheel Hub Axle in both +0.5mm and +1mm options for the Team Associated TC8 1:10 Electric Touring Car. Machined from lightweight 7075 aluminium alloy and treated with a black anodisation process, for combined high strength, scratch resistance and corrosion resistance, compared to the original kit hub axle, the T-Works version are 0.5mm and 1.0mm thicker, allowing fine adjustment of the wheelbase to avoid steering interference and improve the smoothness of four-wheel steering. It also enhances the cars anti-roll capability and driving stability. Equipped with a 6mm bearing structure and anti-detachment design, this ensures stable power transmission without loosening.

Source: T-Works [rc-tworks.com]