Red RC » Team Associated

April 27, 2017

Schelle B6 2mm carbon fibre gearbox shims

Schelle Racing Innovations’ 2mm carbon fibre gearbox shim set helps to raise the gearbox of the Team Associated B6 when racing on high-grip carpet or astro turf. Doing so will reduce driveshaft angles, making them more level, which results in an easier to drive car on high-grip surfaces. The set includes four 2mm shims that raise the laydown gearbox and Schelle recommend to use their laydown motor plate to lower the motor back down to the chassis while also using long shock ends for 2mm of added shock droop.

Source: Schelle Racing Innovations [schelleracing.com]

April 26, 2017

RDRP B6 battery thumb nuts

Revolution Design Racing Products have introduced their new aluminium battery thumb nuts for the Team Associated B6 series of vehicles. Larger in diameter for improved grip and easier battery swaps the parts come machined from high-quality 7075-T6 aluminium, they sport silver chamfered edge details for looks and an anodised surface for wear. The thumb screws are a direct replacement usable with all common B6-series battery braces and available in black or blue anodising.

View another image here

April 26, 2017

Pro-Line B64 Elite body shell

Pro-Line have introduced the new Elite body shell for the Team Associated B64 series of 1/10th scale 4WD buggies. The body features an overall low-slung design with sweeping lines throughout giving it an unmistakable look on the track. A cab-forward design with rails extending up the hood and A-pillar provides enhanced steering while a sloped centre fin balances out the rear of the car with great side-bite. The rear of the side pods feature outer ridges designed to lead air up to the included 6.5″ Air Force rear wing, maximising rear grip. The body is made of genuine Lexan material, it comes including two wings, window masks and a decal sheet.

View more images here

April 24, 2017

RDRP B6 aluminium front bulkhead

Revolution Design Racing Products’ aluminium front bulkhead for the Team Associated B6 series of 2WD buggies was designed to replace the standard part with a more sturdy and durable item. The bulkhead comes machined from aircraft-grade 7075-T6 aluminium and its directional design allows to run 25 degree or 30 degree kick-up angle while the anodised surface and silver edge details add visual impact. The aluminium part adds rigidity and precision when the point gets tough and when racing on high-bite surfaces. The part fits both the B6 and B6D and it is available in black or blue anodising.

View more images here

April 22, 2017

MIP No.1.5 & No.1 Pucks rebuild kit

MIP No.1.5 Pucks are a direct update for those users that find No.1 Pucks screws are coming in contact with the aluminium outdrives over time. By switching over to the taller No.1.5 Pucks it will effectively eliminate the chance of the capturing screw head coming in contact with the outdrive face during wear or articulation, since the screw head is now up and out of the way. And being that the No.1.5 Pucks is taller there is now more surface area for the system to spread load, which will improve overall wear. No.1 Pucks and pins will always be usable in a bind but MIP recommend the use of No.1.5 Pucks. They are also a direct replacement for the front and rear diff assembly of the recently introduced MIP B64 13.5 performance bundle package. Also available as a rebuild kit are the No.1 Pucks that are used for the B64 centre diff assembly.

View the No.1 Pucks rebuild kit here

April 21, 2017

Team Associated B6 FT ESC plate & rear hub inserts

Team Associated have introduced a Factory Team carbon fibre ESC plate for the B6 and B6D buggies as well as Factory Team rear hub link inserts for all B6 and B64 vehicles. Starting with the electronics plate, the part is a lightweight option that provides for easy installation and removal of the electronics for easy chassis cleanup. The part is made from 1.5mm high-quality carbon fibre and features blue anodised nut inserts. It weighs in at only 7.5g and is usable with both the B6 and B6D 2WD buggies.

Continue reading here

April 20, 2017

RDRP B6-series electronic chassis plate

Coming from Revolution Design Racing Products and made for the Team Associated B6-series of buggies is an aluminium chassis insert called electronic chassis plate. The part was designed to be a drop fit for the chassis’ machined pocket behind the steering servo and using it allows to easily remove the speed controller and receiver from the car for cleaning and maintenance purposes. 0.75mm thick and weighing in at only 7g the plate hardly adds any additional weight to the car meaning the buggy’s weight bias remains pretty much the same compared to thicker alloy or even brass parts. The machined pocket also keeps the electronics such as speed controller and receiver very low in the chassis for a low overall centre of gravity. The mounting plate fits both the B6 and B6D, it comes including suitable mounting hardware and in blue or black anodising.

View another image here

April 20, 2017

DKT RC8B3 high roll centre front suspension mounts

Coming from DKT and made for the Team Associated RC8B3 are front arm A and B mounts in high roll centre specification. Developed with the help of Italian frontrunner and newly-crowned Neo Race Nitro Buggy champion, Davide Ongaro the parts are machined from aircraft-grade aluminium and they come black anodised for wear and looks. The mounts are available separately or as combo set including both the A and B hangers.

View more images here