Vision Racing have introduced the “2.5mm long” carbon fibre steering link for the TLR 8ight line of 1/8th scale vehicles. The lightweight part comes cut from high-quality carbon fibre, it features installed ball bearings and fits the current 8ight 4.0, 8ight-E 4.0, and 8ight-T 4.0 as well as all previous 8ight series vehicles.
Source: Vision Racing [vision-racing.net]
New from JConcepts comes the Aero lower from wing for 1/10th 2WD buggies such as the Team Associated B5M and TLR 22 3.0. The lower front wing mounts in a more forward position and is quite easy to trim, use and test without sacrificing all important track time. The front wing features a high-attack design with trim-able rear gurney options. A radical, edgy design which functions and compliments the Finnisher and Silencer body design includes elements and features fresh for the latest off-road conditions. The lower front wing comes in 2-piece sets, is not car specific and can be used on most all 1/10th off-road buggies. Due to customer and team demands, JConcepts has opted to release a genuine 3D printed front mount for the B5M and TLR 22 3.0 vehicle via the company’s Shapeways store. Although not an injection moulded part, the 3D print item should give ample support to drivers wanting to utilise the JConcepts designed parts for a completely matched setup as used by the factory race team.
Team Losi Racing have introduced the Direct Drive System slipper eliminator set for the 22 line of buggies and trucks. Designed to replace the somewhat heavy slipper assembly with a lightweight direct drive system the kit includes a new aluminium slipper shaft, an aluminium spur gear hub and a two different size spur gears. The set is designed with stock racing in mind where low rotation masses are highly beneficial and the spur gears are also available separately in 75T, 72T, 69T and 66T sizes.
Source: TLR [tlracing.com]
Coming soon from TLR is the Laydown Transmission Conversion for the 22 3.0 buggy. A first image of the conversion shows a new aluminium main chassis plate, new laydown gearbox halves, a laydown motor plate, an aluminium idler gear, aluminium rear uprights as well as a carbon fibre battery mount, miscellaneous hardware and a new bodyshell. The conversion allows to convert the standard 3.0 transmission into the now-standard laydown configuration as it is widely used on high-bite surfaces such as carpet, astro turf and prepped clay.
Source: TLR [tlracing.com]
Exotek have introduced new carbon fibre battery straps for the TLR 22 3.0 and Yokomo YZ-2 2WD buggies. Starting with the TLR part, the lightweight battery strap is cut from high-quality carbon fibre and it comes with an alloy hinge plate for secure mounting. It was designed to work with the stock clips and posts and also the optional Exotek twist nut post set and the stronger carbon material keeps the stock battery stops from slipping.
Coming from Exotek is the version 2 carbon fibre top plate for the Losi Mini 8ight AVC buggy. Cut from 2mm carbon fibre the part is of a heavy duty design and extra rigid, helping to prevent centre driveshaft bending. The updated V2 design is made to work with the new Mini 8ight AVC gear cover set and the set includes a bolt-on 6061 alloy gear cap and an antenna mount.
Horizon Hobby have introduced the Losi TEN-MT 1/10th scale 4WD monster truck RTR kit. Based off of the successful TEN-SCTE 2.0 platform the vehicle features a sturdy 4WD drivetrain, tough suspension components with 12mm big bore shock absorbers as well as factory-installed electronics in the form of a Dynamite Fuze 3800kv brushless motor, Dynamite Fuze 130A speed controller and a powerful steering servo. Also included is a Spektrum DX2E 2.4GHz AVC technology radio system and the set is rounded out by a pre-painted bodyshell, available in two designs, and pre-mounted monster truck tyres.
View the features and more images here
MIP have introduced the Roller Pucks shiny drive system for the Losi Ten-SCTE short course truck. Building on the design features of the MIP Pucks system the Roller Pucks utilise large diameter metal bushings in favour of the standard small diameter pins to make for improved wear characteristics as the Roller Puck material is softer than the hardened steel outdrives. Included in the set are a pair of shiny CVD bones, two Pucks outdrives, metal pucks and it is usable with the Losi Ten-SCE 1.0, TLR Ten-SCTE 2.0 as well as the Losi Ten-Rally X.
Source: MIP [miponline.com]
