Red RC » Tekno RC

August 3, 2020

T-Works Tekno DLC-coated shock shafts

Coming from T-Works and made for a range of Tekno RC vehicles are DLC-coated shock shafts. Available are 59mm variants for the SCT410.3 as well as 67.5mm and 74.5mm shafts for the 48 2.0, 48.4/.3, MT410 and ET48.3 kits. All are made of high-quality steel and they come DLC-coated for ultra-smooth suspension action and exceptional durability. Included come shims and nuts for easy and reliable mounting of the piston pistons.

View the other new shock shafts here

July 7, 2020

Tekno ET410.2 1/10th 4WD electric truggy kit

Tekno RC have unveiled their new ET410.2 1/10th scale 4WD electric truggy kit. Tekno RC redefined the 1/10th scale truck in terms of enjoyment and versatility when they introduced the ET410 1/10th 4WD competition electric truggy in 2018. By including many of the design features of the EB410 1/10th 4WD buggy, the ET410 was fast and fun right out of the box. It quickly became a fan favourite due to its versatility and performance on a wide variety of tracks. It could be raced on a small indoor track, then with very few setup changes, you could run it on a large outdoor track with rough surfaces and huge jumps. Now with the ET410.2, Tekno have taken the emerging 1/10th scale 4WD truck class to a new level. The ET410.2 includes all of the durability and handling improvements of the EB410.2, such as the taller one-piece adjustable wing mount, adjustable roll centre rear hubs, 3.5mm hinge pins, and HD hinge pin braces. Tekno also includes stronger HD outdrives, new rear arms with front-mounted shocks, as well as brand-new 18-degree low roll centre spindle carriers to smooth the steering response while improving corner speed. Also part of the package are new spindles with adjustable Ackermann plates to allow more precise tuning of corner entry and exit characteristics. The kit will become available by mid-July.

content

June 23, 2020

BLOK 21bM 3.5cc off-road nitro engine

Tekno RC have announced the release of their new BLOK 21bM engine as well as an extensive parts line for their engines. Intended for buggies but also well suited for truggies, the BLOK 21bM engine provides the smooth, linear power band and excellent fuel mileage required at the highest levels of competition. The bottom-end starts out incredibly smooth, then pulls through the mid and high end to give you the extra grunt to hit that short take-off and additional acceleration for the straightaway. Features include a long-stroke piston and sleeve design, DLC coated silicone-filled crankshaft, laser-etched low profile cooling head, blue 6.0 and 6.5mm venturi, plus all components are interchangeable with the popular 21aP. It comes paired with the 21J carburettor which is widely regarded to be the gold standard due to its tunability and consistency over wide-ranging temperatures and humidity. In addition to the new 21bM power plant Tekno RC are now able to provide all spare parts that drivers might need for their engine.

View a list of the key specifications and more images here

June 22, 2020

JConcepts S15 EB48 2.0 body shell

JConcepts have announced the soon release of their S15 body shell for the Tekno EB48 2.0 buggy. The S15 blends performance features from the popular Silencer body with new features such as mid-body winglets and rear stabiliser kick-up. The roof of the body remains strong with the upper fin in position for stability and tracking ability. The area behind the cab remains clean with a deep-rooted position allowing exposure to air and escape. The S15 stance cockpit allows ample inside space, a smoother high-speed windshield transition which tackles even the most high-speed conditions. The hard-edged chamfering provides the classic JConcepts look while also delivering aero benefits and perfect decal positioning. The front and rear body mount area is cleanly designed and allows for a drop-fit on the Tekno EB48 2.0. Included with the body come window masks and a decal sheet.

View more images here

June 18, 2020

Alex Vaughn RC NB/EB48 2.0 carbon shock towers

AVRC Products have announced their 5mm carbon fibre shock towers for the Tekno NB and EB 2.0 buggy models. With performance and durability in mind the design focuses on corner radius, chamfering of edges and material. AVRC focused on limiting sharp corner radius in the design to provide strength and rigidity, in addition chamfered edges were added to both sides to help limit material fraying during extreme impacts. As for material the shock towers are made of 5mm thick 3k Twill weave carbon fibre with matte finish. The shock stays are available separately for the front and rear from now on.

View the rear shock tower here

June 3, 2020

Tekno RC aluminium centre diff support

Fresh from Tekno RC is this aluminium centre diff support for the EB410.2 or ET410. Improve durability and tune your vehicle’s flex characteristics using this CNC machined 7075 aluminium part. Finished in gun metal grey it is a direct replacement for the stock part and both the stock and carbon fibre top plate are also compatible.

Source: Tekno RC [teknorc.com]

May 17, 2020

T-Works NB48 2.0 diaphragm shock cap set

Coming from T-Works and made for the Tekno RC NB48 2.0 buggy is a diaphragm shock cap set. The caps are machined from high-quality 7075-T6 aluminium and they come black anodised for improved wear resistance. The design of the shock caps allows to use the included volume compensating rubber diaphragms whose two hardnesses allow to further adjust shock rebound and thus the behaviour of the buggy in various track conditions. Included in the set come four shock caps, a total of eight rubber diaphragms as well as four shock cap bushings.

Source: T-Works [rc-tworks.com]

May 4, 2020

JConcepts S15 NB48 2.0 body shell

Coming from JConcepts and made for the Tekno NB48 2.0 buggy is the S15 body shell. The S15 blends performance features from the popular Silencer body with new features such as mid-body winglets and rear stabiliser kick-up. The roof of the body remains strong with the upper fin in position for stability and tracking ability. The engine area remains clean and a deep-rooted position allows the engine head maximum side exposure to air and escape. The front and rear body mount area is cleanly designed and allows for a drop-fit on the Tekno NB48 2.0 and other kit variants. For the precise fit, the design has undergone changes to match the Tekno chassis side-guards and body mount positioning. The S15 stance cockpit allows ample fuel tank access, a smoother high-speed windshield transition which tackles even the most high-speed conditions. The hard-edged chamfering provides the classic JConcepts look while also delivering aero benefits and perfect decal positioning. Included with the clear body come window masks, and a decal sheet.

View more images here