Red RC » Tekno RC

October 21, 2019

T-Works NB48 2.0 steel chassis skid protectors

T-Works have announced the release of their new stainless steel chassis skid protector sets for the Tekno RC NB48 2.0 buggy. The skid plates will provide additional chassis protection in the front and rear areas, something that comes in handy especially when running on highly abrasive surfaces or on track with large jumps. The protector plates are made of high-quality stainless steel material for durability and corrosion resistance and they are available as separate front and rear end sets including a pair of skid plates each.

View the rear chassis skid plate set here

October 15, 2019

T-Works NB48 2.0 titanium turnbuckles & screw sets

Coming from T-Works and made for Tekno RC’s new NB48 2.0 1/8th nitro buggy are a titanium turnbuckle set as well as two screw kits. Starting with the turnbuckles, the set includes a total of seven spanners for the steering, camber and servo links that help to reduce weight while offering higher corrosion resistance than standard steel turnbuckles. Also included are 4mm and 5mm turnbuckle wrenches for easy building and setup. As for the screw sets, coming soon are a 140-piece UFO head titanium and a 156-piece gold-colour steel screw kit. The titanium set will greatly lower the overall weight of the buggy while adding corrosion resistance. The gold-coloured set mainly adds visual impact but the surface coating also prevents the parts from collecting rust over time.

View samples of the screw sets here

October 1, 2019

Tekno RC introduce NB48 2.0 optionals

Tekno RC have announced the release of some new option and tuning parts that are designed to further enhance the performance of the NB48 2.0 buggy. First up are hard compound suspension arms that are made from a stiff composite material and are intended to be used in hot weather conditions or any time a more direct feeling is desired to sharpen up the handling. Tekno RC recommend using these arms when the ambient temperature is above 35 degrees Celsius but they are not as durable if used in temps below 5 degrees Celsius. No additional parts are required when replacing stock arms but they are 1mm longer and will require camber, toe, and bump-steer to be readjusted.

Continue reading here

September 13, 2019

Tekno NB48 2.0 1/8th nitro buggy kit

Following a couple of first teasers Tekno RC have fully unveiled their new NB48 2.0 1/8th scale nitro buggy kit. The buggy builds on a newly designed chassis that is 1mm thinner than the previous main plate, however due to its wider design its reduces twitchiness and improves handling and flex characteristics on rough tracks. The buggy also does not sport a traditional radio tray but separate radio and battery boxes as well as independent servo mounts for a more equal left/right chassis flex. Both the battery and receiver box are of the same dimensions, allowing to swap battery and receiver for weight bias changes.

Continue reading here

September 6, 2019

Tekno NB48 2.0 1/8th nitro off-road buggy – Coming soon

Tekno RC have announced the soon release of their new NB48 2.0 1/8th scale nitro off-road buggy. Utilising a completely new platform compared to the previous .4 kit, the 2.0 prototype was tested extensively by Tekno RC’s world wide team of factory drivers and it will be based on a new 3mm CNC-machined 7075 aluminium hard-anodised and lightened chassis. Other features include independent servo mounts with decoupled battery and radio boxes, CNC 7075 shock towers, pivot blocks, and motor mounts, rear hub and arm inserts for adjustable roll centre and toe, a long arm, narrow pivot suspension geometry, 1-piece wing mount and ultra-lightweight wing as well as a 2nd generation quick fuelling body. More details about the new design will become available soon.

Source: Tekno [teknorc.com]

September 5, 2019

Exotek ET410 machined spur gear & mounting plate

New from Exotek is a machined heavy duty delrin spur gear and aluminium mounting plate set for the Tekno ET410 truck’s centre gear differential. The 2-piece design allows for quick and easy spur gear changes as the owner does not have to open the gear diff and remove the outdrive, or refill the oils. The alloy mounting plate also provides cooling of the diff fluid for more consistent diff action while the machined delrin spur gear provides robust durability along with smoother spur gear operation. The set includes a 53T 32 pitch spur gear that is also available separately.

View more images here

August 2, 2019

Leadfinger Racing ET410 Strife HD body shell

Leadfinger Racing have introduced a new heavy duty variant of their popular Strife body shell for the Tekno RC ET410 4WD truck. The new thicker version is moulded from the same material used for Leadfinger Racing’s 1/8th scale bodies, meaning more longevity for racing and bashing applications. As usual the body comes clear, including window masks and a decal sheet.

View another image here

July 30, 2019

VSR Products Tekno 1/10th wing shims

Coming from VSR Products and made for Tekno RC’s 1/10th scale buggies and trucks are two different height wing raiser shims. Available in 5mm and 7mm thickness the shims will improve rear end grip while also allowing for more consistent cornering. The 3-D-printed wing raisers are available separately and they include longer countersunk mounting hardware.

View the 7mm wing shim here