Red RC » Tresrey

October 22, 2010

Tresrey DEX410 shock conversion & towers

Tresrey have released yet more option parts for the Durango DEX410/R buggy. First up are these high precision machined shock cases with special smooth coating (MOS coating). Offering less friction than the standard material, this conversion set includes 3mm shafts also for less friction against the O-rings. With the included machined shock pistons, you can upgrade your standard shocks to the next level. Also new are these front and rear 4mm thick light weight carbon shock tower with more shock mounting positions for fine tuning your setup. The rear tower also sport a lower upper arm mounting position compared to the standard version for more setting variations. Finally is this high traction weight (30g) that can be mounted under the rear gear box that will give more traction directly to the car. Available mid to late November.

View the other products here

October 20, 2010

Tresrey DEX410 aluminium servo saver crank

New from Tresrey, is this high precision machined aluminium servo saver crank for the Team Durango DEX410/R. This part helps resolve one of the only few weak points of the car and is a perfect replacement with standard plastic crank. Easy to install, Made in Japan, it will be available on late October.

View the part mounted here

September 4, 2010

Durango report from the Japanese Nationals

Japanese Durango importers Tresrey have sent us this report on their team’s performance at last weekends Japanese 1/10th 4wd offroad buggy National Championship that was held at the Yatabe-Arena in Tsukuba city. Their team drivers Kazuki Sasatsu finished 5th and Yuichi Ajishi finished 9th in this tough race event against all other larger Japanese RC manufacturers.

Continue the report here

August 10, 2010

Tresrey DEX410 high-quality bearing set

Tresrey have released this high-quality bearing set for the Durango DEX410 and 410R. The full set consists of 18 bearings that for the most case uses a teflon seal which helps the durability of the bearing itself by making it dustproof while at the same time allowing for a super free rotation. For the outer hub carrier bearings, rubber is used for the seal for extra durability.

Source: Tresrey [tresrey.com]

July 12, 2010

Tresrey DEX410 Red options & hinge pin set

Tresrey have released a further batch of option parts for the Durango DEX410/R starting with this red aluminum parts set. The set includes spacers, wheel cones, servo saver shaft and more, which are all red anodized matching with all other Tresrey option parts like aluminum hubs and center drive shafts. They have also released this heavy duty hinge pin set which gives you more durability and strength as well as smoother operation due to its titanium coating. Made in Japan.

View more images of the parts here

March 31, 2010

Tresrey Gainabull DEX410 body shell

Japanese company Tresrey have released their new Gainabull shell for the Durango DEX410. The new body follows the same trend as in 1/8th gas by sporting a forward mounted cockpit, which allows better flow of air to the rear wing for improved downforce. Designed with plenty of space around the electronics for cooling, together with air intakes, it can be easily mounted through use of body clip or velcro. Available now.

Click here for more images of the Gainabull

February 16, 2010

Tresrey DEX410 option parts

Japanese company Tresrey have introduced details of some new products for the Durango DEX410 4wd buggy, including new front and rear shock towers, rear uprights and front hub carrier. The new front and rear shock towers are made from 4mm thick carbon fibre and these more compact towers have a modified shock angle compared to the standard version and now only have two shock mounting positions compared to the standard 3. The new red anodized aluminum rear uprights house a larger diameter axle bearing (5x13x4mm) for better durability and are sold in 0 and 1 degree versions. On the front, the new red anodised aluminium hub carriers also sports the larger diameter axle bearings and similar to the rear uprights, the part is much stronger than the plastic kit version.

Click here to see the other products

January 5, 2010

Tresrey DEX410 Optional CVDs

Japanese company Tresrey have introduced some new optional parts for the Durango DEX410 4wd electric buggy. The new items include a set of new red anodised alloy centre shafts, which are lighter than the original steel versions yet retain their strength through the use of a larger diameter shaft and extra material around the connection point between the shaft and steel differential input shaft. Tresrey have also released new front and rear CVD shafts and wheel axles which have been made from hard coated steel with the wheel axles ground down where they contact the bearings, providing better tolerances and smoother operation.

Click here to see the front and rear CVDs