Red RC » Xray

October 9, 2017

Herbert Weber joins Xray Factory Team

Xray have announced that Austrian & former ETS Champion Herbert Weber has joined their Factory Team to race the Xray X1 platform. Winner of the very first season of Formula in the ETS, as well as a multiple winner in the Mibosport Cup, Herbert had the following to say:

I’m very happy and proud to be a part of the big Xray Factory Team. Big thanks to Xray for the trust in me and I can’t wait to hit the track with the Xray cars. I will give my best, and will represent Xray in best way possible. At races in Austria as well as internationally, I want to help all Xray drivers to find a good setup for their car. You can come and ask me any time.

Source: Xray [teamxray.com]

October 9, 2017

Xray XB2C 2018 1/10th 2wd buggy

Xray have released the 2018 version of their XB2 carpet edition 2wd buggy. Featuring a number of refinements throughout, the first of which is the new chassis made from 2.5mm Swiss 7075 T6 aluminium whose special design ensures that different areas of the chassis have the proper flex. The precision milling allows the chassis to be stiff enough to perform properly without risk of bending. To improve front chassis flex, the front composite chassis braces were redesigned and shortened to allow for mounting all-new graphite side guard braces for better stability and performance. In the rear, the all-new narrower suspension holders with new rear suspension geometry gives increased rear traction. The gear differential has new diff-outdrives that are stronger as a result of a new hardening process that increases lifetime and reliability, and are now designed to be used with a new more durable 2.5mm pin on the drive shafts. Finishing off the improvements, are new 4.5mm off-set wheel hex hubs to compensate for the new narrow suspension holders and higher-precision shock absorber lower shims for more precise shock shaft movement.

View the complete XB2C 2018 presentation here.

October 6, 2017

T-Work’s Tekno & Xray skid protectors

New from T-Work’s for both the Tekno NB48.4 and EB48.4 as well as a version for the Xray XB8 and XB9 is this pair of rear chassis skid protectors. Made from stainless steel, they come in a pack of two, they help protect your expensive chassis plate from being worn down by highly abrasive surfaces.

View the Xray version here

September 27, 2017

Floating Master AMB transponder mount

Floating Master have introduced their all new integrated AMB transponder mount for both Xray and Tamiya touring cars. This uniquely designed AMB mount places the transponder at the most optimal location and orientation for signal reception, easy access while also able to free up space on the chassis. The mount is made out of 7075 aluminium and carbon fibre and is available now.

View more images here

September 26, 2017

3DRC X1 rear chassis diffuser

German brand 3DRC has introduced a new rear chassis diffuser for the Xray X1 on road kit. The diffuser that is attached to the power pod side plates, which allows the use of a multitude of wing heights as they will not interfere with the diffuser. The part is 3-D printed from tough yet flexible material and will add scale looks and additional downforce. Available through 3DRC´s Shapeways store or selected hobby shops.

View an image of the mounted diffuser here

September 21, 2017

JConcepts L1 Layla LMP body shell

Coming from JConcepts is the L1 Layla LMP body shell for 1/10th formula pan cars such as the Team Associated F6 and the Xray X1. The body has a low-slung appearance and offers complete chassis coverage and a front chin spoiler starts the design for improved steering response and front-end grip. The L1 rises over the suspension and blends with the tyre covers while the closed cockpit design resembles the LMP1 vehicles of the latest generation. The wrap-around window design and full length rear stabilising and rollover fin take over as the design focal point. Over the rear tyres, the shell drops off to close off the rear fender while a recessed area allows room for the rear wing option. The L1 is loaded with louvers, scoops and fine detailing to ensure not only authentic looks, but dedicated function. The separate rear adjustable wing is a two-piece design that attaches with included 3mm hardware. The top element of the wing supplies the down-force helping the L1 whisk through the turns and the side stand-offs bring the height to operating level and helps provide that all important stability. Included in each body set, L1 “Layla” decal sheet, two-piece rear wing, three-piece paint mask for wrap-around window, ten-piece 3mm screw and nut hardware. Body mounts, hardware, conversion or other necessary items for the final fit are not included, however the soon-to-be-released JConcepts part number #2468 contains all parts to convert RC10F6 to a LMP ready vehicle.

View more images here

September 20, 2017

JConcepts XB4 F2 buggy body shell

Coming from JConcepts is the new F2 body shell for the Xray XB4 2017 4WD buggy. Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance. An increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps while the forward cab placement changes performance and visible bias which help steering rotation in low traction corners. The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralise the at-speed handling. The rear of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear. In addition to the newly designed body, JConcepts has included two of the latest Aero rear wings.

View more images here

September 20, 2017

Xray XB2 2018 – Coming soon

Xray have released a first teaser image of the forthcoming XB2 2018 1/10th 2WD buggy kit. As usual no official details are available yet apart from the image, but we expect all details and images to surface very shortly.

Source: Xray [teamxray.com]