Red RC » Xray

July 26, 2017

RC Prostyle X1 2.25mm carbon fibre chassis

Coming from RC Prostyle is a 2.25mm carbon fibre chassis set for the Xray X1 formula car. Constructed from high-grade U.S. made carbon fibre the chassis was designed especially for asphalt racing in medium to high-grip conditions. The super-narrow design and raised side links increase ground clearance during cornering which results in less scrubbing and improved corner speed. Included come two types of link plates, one for the standard Xray links and one for shorter 65mm links such as the ones used by Roche or Yokomo – using the shorter links will help gain on-power steering. Included in the set are the chassis, rear pod plate, side link plates as well as mounting hardware.

View another image here

July 20, 2017

Fenix Slim Series formula carbon fibre chassis

Coming from Fenix as part of their new Slim Series chassis range are carbon fibre chassis for a range of formula pan cars. Designed to reduce chassis scrub during hard cornering the chassis will allow for a softer suspension setup due to greater ground clearance. Available from September are sets for the Xray X1’17/16/15, Yokomo YR10F, Team Associated F6 and Fenix Mistral.

View the other sets here

July 7, 2017

Radtec DB8 front driveshafts & X1 alloy camber bushings

Radtec have introduced new a set of spring steel double joint front driveshafts for the Yokomo BD8 as well as three sets of aluminium caster bushings for the Xray X1 formula car. Starting with the driveshafts, they are made of high-quality spring steel, come in 41.1mm configuration and with ground wheel axle seats for improved precision. Also included are blue C-blades. As for the X1 camber bushings, the orange anodised aluminium parts are available in 1-dot 1.5°/2.5°, 2-dot 1.0°/3.0° and unmarked 2.0° configuration with the alternative settings being accessible by rotating the inserts. Each set includes two inserts and all parts are available now.

View the camber inserts here

June 27, 2017

RC Prostyle T4 aluminium & carbon battery mount

Spanish company RC Prostyle have introduced their new LiPo battery mount for the Xray T4 series of electric touring cars. Constructed from machined carbon fibre and orange anodised 7075 aluminium, the mount allows to shift the battery pack forth and back as well as to the side a couple of millimetres while the upper carbon fibre brackets keep the battery in place, doing away with the usual tape and ensuring tweak-free battery mounting. The battery mount will hit stores very soon.

Source: RC Prostyle [rcprostyle.com]

June 27, 2017

Xray XB8 series anti-roll bar wires

Xray have expanded their range of anti-roll bar wires for the XB8 series of buggies, trucks and cars by three front and two rear variants. Available for the front are the thin 1.6mm, 1.8mm and 2.0mm wires while the rear range is complemented by thin 1.8mm and 2.0mm variants. All are made using high-quality spring steel, they come laser-engraved for easy identification and fit the XB8 buggy, XT8 truck and GTX8 on-road kit.

View the rear anti-roll bars here

June 26, 2017

Xray XB2 4-gear composite mid motor gearbox set

Coming from Xray and made for the XB2 Dirt Edition 2WD buggies is a 4-gear composite gear box set. Using four internal gears and locating the motor shaft on the left hand side the gearbox is a tuning option to fine-tune the handling characteristics while also allowing for super-easy differential access. The set includes the bottom plate as well as the left and right hand gearbox halves.

Source: Xray [teamxray.com]

June 26, 2017

Xray X12 2018 – Coming soon

Xray have announced the soon release of the 2018 edition of their successful X12 1/12th pan car platform. The multi-time European, BRCA and Snowbird championship winning car is set for some subtle changes with more information being available in time for the release.

Source: Xray [teamxray.com]

June 22, 2017

Xray GTX8 & XT8 rear graphite brace set

Coming from Xray and made for the GTX8 and XT8 kits is a rear graphite brace set. Cut from high-quality carbon fibre the braces reinforce the rear composite chassis braces which leads to an overall stiffer chassis which is beneficial especially for high-traction racing conditions. The braces come in sets of two and including mounting hardware.

Source: Xray [teamxray.com]