Red RC » Xray

February 12, 2016

Xray XB2 Dirt Edition 1/10th 2WD buggy kit

Following the XB2 Carpet Edition 1/10th 2WD buggy kit that was introduced back in November, Xray now also release all information on the forthcoming Dirt Edition kit. The buggy was designed for very-low to medium-high traction conditions and it comes with a 3-gear gearbox with high layshaft design, moving the motor much closer to the differential than the Carpet Edition gearbox. This makes for improved rear traction in low-grip conditions which is further helped by the inclusion of a ball differential instead of a gear diff as in the Carpet kit. Other Dirt-specific features include medium composite suspension parts, composite front and rear shock towers as well as a specially designed motor upper brace and battery strap. The kit will hit the stores world-wide very soon.

View the features and more images here

February 12, 2016

Xray T4 adjustable hard carbon fibre top deck

Coming soon from Avid and made for the Xray T4’16 is the adjustable 2.0mm hard carbon fibre top deck. The first of its kind, it allows to adjust the twisting stiffness in the front, simulating a 0.5mm soft top deck all the way to a 2.2mm hard top deck by simply sliding a clamp back and forth in the front. The rear section of the TD also allows a clamp adjustment which is only capable of stiffen the rear for advanced setup gurus. Five small position holes have been added on each rail to help with precise adjustment changing and monitoring and the deck is cut from 100 percent premium carbon fibre with layup angles balanced left and right to insure equal twisting resistance side to side. The top deck is recommended for use on all conditions, it fits the T4’16, ’15 and ’14 and it includes the upper deck, clamp, and an Avid mini decal.

The adjustment is explained here

February 12, 2016

Fenix X1 & SF2 aluminium chassis parts

Fenix have released new optional chassis and pod plates for the Xray X1 and Serpent SF2 formula car kits. Starting with the X1 chassis, it was designed to be way slimmer than the original, reducing scrubbing during hard cornering. Thanks to strategically machining the chassis weighs in at about 76g and it offers a good balance between torsional flex and rigidity. Also available is a suitable aluminium motor pod. Made as a direct replacement for the standard carbon fibre parts are the aluminium chassis and motor pod for the Serpent SF2. Machined from 7075-T6 aluminium and coming black anodised the parts make for different flex characteristics which can be beneficial in a range of track conditions. Additionally Fenix have also announced the Rattlesnake chassis conversion kit for the SF2 that allows to run the desired cross battery position. Included are the chassis, motor pod plate, upper plate and crossbrace.

View more images here

February 11, 2016

Xray XB2 adjustable ball differential

Xray have introduced an optional ball differential for the XB2 2WD buggy kit. Designed to replace the gear differential the ball diff is a tuning aid for very low to medium-bite tracks where it helps to gain traction and improve drivability. The pre-assembled and externally adjustable unit features hardened Hudy spring steell outdrives and it offers an ultra-smooth operation and long lifespan.

View another image here

February 10, 2016

Xray XB2 steering knuckle Ackermann plates

Xray have introduced new steering knuckle Ackermann plates for the XB2 2WD buggy. Adding to the standard “long” plate are middle and short plates that help to fine-tune the Ackermann angle during cornering. While the standard “2-slot” plate creates a mild steering response the optional 1-slot and 0-slot plates make for a more aggressive steering feeling with the short 0-plate being the most aggressive, making it ideal for tight and technical tracks. The plates are cut from 2.5mm carbon fibre, they come in pairs and are usable both on the left and right hand steering knuckle.

View the 1-slot plates here

February 8, 2016

Xray XB2 1.5mm Lexan rear wing

Coming from Xray and made for the XB2 2WD buggy is an extra strong rear wing made from genuine Lexan material. The thicker 1.5mm polycarbonate material makes for increased stability, durability and lifespan of the wing and it can also improve traction due to more efficient aerodynamics, but at the same time steering might be slightly reduced. The wing fits the XB2 and all buggies with comparable wing mounts.

Source: Xray [teamxray.com]

February 5, 2016

Xray XB2 Dirt Edition 2WD buggy – Coming soon

Coming soon from Xray is the XB2 Dirt Edition 1/10th scale 2WD electric buggy kit. Based off of the already available XB2 Carpet Edition the Dirt-specific kit was developed for lower traction tracks such as dirt and natural clay. Full details on the buggy along with proper production kit images will become available soon.

Source: Xray [teamxray.com]

February 4, 2016

Xray XB2 aluminium front & rear camber link mounts

New from Xray and made for the XB2 2WD buggies are aluminium camber link mounts. Machined from 7075-T6 aluminium and coming black anodised the parts increase stability and durability while making for a more precise and more forgiving handling at the same time. The front camber link mount fits both the carpet and dirt edition XB2 while the rear mount is only suitable for the carpet spec car.

View the rear camber link mount here