Red RC » Xray

July 18, 2013

Xray XB9E electric buggy announced

Xray introduce the XB9E 1/8th electric off-road buggy. The follow-up model of the long-running XB808E is based on the successful XB9 platform, making use of its gearboxes, drivetrain, suspension parts and shocks. The chassis though is developed from the ground up to create the optimum in weight balance, weight distribution and handling. The vehicle is based on a longer and wider 3mm 7075-T6 aluminium chassis with new side guards, a central battery mount and an updated – easy to remove – radio tray with sealed receiver box and carbon fibre servo mount plate. The 7075-T6 aluminium motor mount is of a sliding design and 2mm wider compared to the old variant for improved durability. Also new is the composite battery mount with higher barriers to securely fasten one 4S or two 2S LiPo battery packs while the speed controller finds its home on a large surface plate in-line with the battery.

Click here to continue reading

July 17, 2013

Exotek XB4 alloy & carbon option parts

Exotek have new option parts for Xray’s XB4 electric off-road buggy available in the form of an aluminium steering rack, alloy CVD safety cups and carbon battery straps. Starting with the steering rack, the part is machined from 7075 material and offers reduced flex over the original brace for a more direct steering input. The rack weights in at 4g, maintains the stock geometry and is available in orange or black colour. Next up are the CVD safety cups that keep the front, rear and centre driveshaft’s cross pins in place. They offer increased durability, are available in orange or black colour and give the buggy a factory team look. Last but not least come the carbon fibre battery straps. The parts are machined from 2.25mm material, they match with the original Xray carbon fibre and work with the kit’s or Exotek’s twist nuts.

Click here to view all new parts

July 16, 2013

Xray T4 closed layshaft bulkhead

Xray introduce this new design middle layshaft holder for the T4 touring car. Different from the original ‘open’ part the ‘closed’ designed of the bulkhead captures the layshaft bearings to allow the removal of the upper topdeck screws in order to further adjust chassis flex and therefore the characteristic of the car. The bulkhead is useable on the left and right hand side and is made from 7075-T6 aluminium and comes orange anodised to match with the remainder of the chassis.

Source: Xray [teamxray.com]

June 28, 2013

Xray Column – Making the XB4 Part 2

Xray Column - Making the XB4 Part 2

The 67th installment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column, Juraj gives a further insight into the development of Xray’s first 1/10th electric off-road buggy, the XB4.

As soon as the design was finished we started to machine and mill all aluminum and steel parts. Meanwhile, the 3D files for all plastic parts were sent to an external company that “prints” for us the plastic parts from special polyamide which is not suitable for racing but gives us a perfect understanding of the shapes and fit of all composite parts before they are produced. As soon as all the first XB4 prototypes were produced, I personally assembled all the parts to get a feel for every single detail and also because this is one of my favorite phases of the project where we still get to play.

Read the full column here.

Source: Xray [teamxray.com]

June 21, 2013

Xray XB9 low-downforce body

From Xray comes this new low-downforce body designed specifically for rough, damaged tracks. The body reduces downforce and makes the car easier to drive on these type of tracks. The body is also wider to fit the wider chassis of the XB9’13. When used with earlier XB9 cars, this body will be a bit too wide at the base.

View more images of the body here

June 11, 2013

Xray XB4 white Aerodisk wheels

Xray introduce their Aerodisk wheel value packs for the XB4 off-road buggy. The rims come in white colour, are designed for 14mm hex adapters and are made of a flexible yet durable material. They come as sets of five pairs as narrow front and wide rear wheels.

Click here to see the rear wheels

June 4, 2013

Xray XCA 15T 1st gear pinion

Xray introduce this high-strength 15T 1st gear pinion for the RX8 car. It is made from 7075-T6 aluminium and machined on special gear machines for the ultimate in precision and true running. A fine internal threading allows easy installation on XCA clutch bells and each pinion is etched with the tooth number for easy identification. The new 15T variant rounds up the already existing range of pinions with a smaller version.

Source: Xray [teamxray.com]

May 29, 2013

Xray RX8 3S linear spring sets

Following the new 3S linear shock springs for the NT1 Xray now also introduce RX8 specific sets. The 3S springs are specially designed for the new shorter low profile shock absorbers and are shorter in length with the rear one now sporting the same dimensions as the front spring. The laser-engraved, selected and matched parts make for more corner entry steering and are available as C=3.5 to 5.5 and C=7.0 to 8.0 variants with the lower numbers marking the softer springs.

Source: Xray [teamxray.com]