Red RC » Xray

December 18, 2012

Xray T4 graphite battery strap

Xray released this pre-assembled graphite battery strap for the T4 that features the Xray smart battery holder system and battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips. The battery tweak-free mounting system works with the Multi-Flex Technology concept, the redesigned capture wheel gives sufficient play and will not stiffen the chassis even when the wheel is tightened excessively.

Source: Xray [teamxray.com]

December 15, 2012

Xray Column – Making the T4, Part 2

The 65th installment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column, Martin Hudy continues to give us an insight into the track testing that went into their all new T4 touring car.

Even though Alex and I continued to test the prototype parts on carpet, the second real test came in March when Alex went to Gran Canaria for the ETS race. I was occupied with some other very important priorities at home so was unable to attend the race, leaving Alex to do all of the testing alone. In order to get in as much testing as possible, Alex arrived on the Monday leading up the race. I kept in touch with Alex via text messages during his testing period to keep up to date with his progress. After 3-4 days of testing Alex was 0.2 seconds faster with the new car than his T3 2012, and his feedback would prove valuable for the continuing development.

Read the full column here.

Source: Xray [teamxray.com]

December 12, 2012

Xray ultra-stabile clutch spring

XrayClutchSpring

Xray have released this ultra-stabile clutch spring for both the RX8 and NT1 clutch. Characteristics of this new spring is that it remains constant during long runs.

Source: Xray [teamxray.com]

December 11, 2012

Xray one-piece rear suspension holder

Xray have released this optional one-piece aluminium rear suspension holder for the T4. A direct replacement for the standard forward holders of the rear suspension, this holder is recommended to use for more steering in high grip conditions only, as it increases stability. CNC machined aluminium lower rear suspension holder which is part of suspension holder system allows suspension arms to be mounted independently from the diff bulkheads.

Source: Xray [teamxray.com]

December 5, 2012

Xray NT1 alu lower engine mounts

New from Xray for the NT1, these lower engine mounts are made from tough aluminium alloy, and include factory-pressed locating pins. Lowered by 1.5mm compare to the standard engine mount it lowers the engine position to push the weight as low as possible to lower the CG of the car. Makes the car more stable and makes the car roll less and less traction roll. Must be used with the 2012 NT1 chassis and 30mm aluminium flywheel reverse XCA-flat.

Source: Xray [teamxray.com]

December 4, 2012

Xray XB4 1/10th 4wd buggy

Xray have officially announced their new 1/10th scale 4wd EP buggy platform, the XB4. The XB4 is the world’s first 1/10 off-road chassis incorporating the Multi-Flex adjustment technology, which allows tuning the chassis flex for different track conditions. It doesn’t matter if the track is low traction, medium or super high traction, you can adjust the chassis flex to suit the track conditions in a matter of seconds, and again adjust the flex easily when the conditions change. The revolutionary and unique chassis design merges a Swiss 7075 T6 aluminium backbone and composite chassis-plate which have been firmly mounted together to create a solid framework with each piece playing a distinctive role. The aluminium backbone provides the car with stability and stiffness, while allowing torsional flex along the lengthwise axis while the composite chassis absorbs vibrations and works as the main Multi-Flex element, allowing the changing of flex independently in the front and rear of the car.

View more details and images here

November 27, 2012

Xray XB4 soon to be released

Xray’s entry into the competitive 1/10th EP buggy market, the XB4, is close to release. The full announcement is scheduled for this weekend when Xray finally unveil their all new 4wd buggy. Full details here later in the week.

Source: Xray [teamxray.com]

November 22, 2012

Xray NT1 front reinforcement brace

Similar to that released for the RX8, Xray have released this graphite brace for the flex radio plate on the NT1. Made from 2.5mm thick carbon fibre, the front reinforcement brace stiffens the front of the car for high-traction conditions.

Source: Xray [teamxray.com]