Xray hard coated aluminium wheel nut
Xray have released this hard coated aluminium wheel nut for their range of 1/8th offroad vehicles. Ribbed for secure tightening on the axle they are sold as a pair.
Source: Xray [teamxray.com]
- Red RC Network:
- Red RC |
- Red RC Events
Xray NT1 progressive springs
From Xray for the NT1 these new progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with the hardest at the end. Pearl-grey color and laser engraved for easy identification they are available as a pair, with the springs individually measured, controlled, inspected and matched to provide identical damping characteristics. During the selection process, each spring is compressed in several fine increments and the values are recorded. Each spring is then matched with another spring of identical characteristics.
Source: Xray [teamxray.com]
Xray XB9 progressive springs
Made for the XB808 and the XB9 are the new progressive springs from Xray. They feature softer rate at the beginning and become harder during compression to generate more grip and higher corner speed. They come laser-etched for easy identification, are available as pair and are usable on both the front and the rear of the buggy. Available as soft, medium-soft and medium type.
Source: Xray [teamxray.com]
Spec-R Sport Series swing shaft
A new release from Spec-R is the Sport Series swing shaft. It is made from hard coated steel with a safety ring and at a lower price it is better for the beginner and for practice. Available for Xray touring cars in 50mm & 52mm and for Tamiya touring cars in 44mm & 46mm.
Source: Spec-R [spec-r.com]
Xray T3 progressive springs
Available for the T3, Xray’s new progressive springs marked 2.2–2.6 are soft at the beginning of the compression, similar to hardness 2.2, but become harder as the spring is compressed more in the middle, with hardness 2.6 at the end. Black color and laser engraved for easy identification. Available as a pair, the springs are individually measured, controlled, inspected and matched to provide identical damping characteristics. During the selection process, each spring is compressed in several fine increments and the values are recorded. Each spring is then matched with another spring of identical characteristics.
Source: Xray [teamxray.com]
Xray NT1 Pro Limited edition
To celebrate the success of the NT1, Xray have released the limited-edition NT1 Pro, fully loaded with all of the finest & best option parts, all for very special price. Get the NT1 tuned with all the greatest parts as used by the factory team this year, as it goes forward with the mission of capturing the European and World Championship titles.
View the full list of included option parts here
JConcepts Finnisher for Xray XB9
Further expanding their line of Finnisher bodies, JConcepts have made their popular body shell available for the Xray XB9. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps while the forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have a strong and chiseled look, including a recessed area in the rear which allows another option for air-escape. The chassis side-guard to body fit has been tightened up which helps eliminate large empty voids that contribute to mid-flight directional changes. The area behind the cab has been greatly lowered exposing more of the engine heat-sink allowing more heat-escape while the V-stepped feature which is a highlighted styling cue of the Finnisher buggy bodies has been incorporated toward the rear and allows an additional area that can be trimmed to allow air-flow through the body.
Source: JConcepts [jconcepts.net]
Xray NT1 pre-assembled brake pad set
For the NT1, Xray have released this factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. The brake pad backing plates are heat-treated for maximum lifespan. Special high-grip brake pad material is specially bonded to backing plates for high resistance to generated heat build-up. Sold as a set of 2.
Source: Xray [teamxray.com]
