Red RC » Xray

April 27, 2012

Xray XCA reverse clutch set

Xray introduce the XCA centrifugal axial reverse clutch set for the NT1 200mm nitro chassis. The set includes redesigned components which create a more dynamic clutch engagement suitable for most racing conditions, such as a super-lightweight flywheel, new black reinforced clutch flyweights, new smaller and super lightweight clutch bell, smaller diameter yellow clutch shoe, new conical clutch washer spring set, and a new aluminium clutch disc. Not included are the needed pinion gears.

Source: Xray [teamxray.com]

April 18, 2012

Xray zipped hooded team sweater

The authentic new Xray hooded team sweater with zipper is made from high-quality 100% cotton fabric in a classy blue hue. The new hooded sweater is very comfortable to wear and has soft elasticized cuffs at the ends of the full-length arms and is emblazoned with Xray Racing Team logos on the front and back.

Source: Xray [teamxray.com]

April 12, 2012

Xray T3 1-hole graphite suspension arms

Xray introduce new moulded lightweight composite lower suspension arms. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigours of high-performance racing. The optimized suspension arms give improved traction, easier handling, and decrease tire overheating which leads to car stoppage under high-grip conditions. They feature a single optimized shock mounting position and integrated anti-roll bar mounts. The graphite arms have same size and geometry as standard 1-hole suspension arm, fit the Xray T2 and T3 cars and will become available first for all Xray pilots at the polish ETS round 4 starting from tomorrow.

Source: Xray [teamxray.com]

April 5, 2012

Exotek XR3’12 Performance LiPo chassis

Exotek have introduced their XR3’12 Performance ultra narrow LiPo chassis with bushing supported hinge pin blocks. A new design incorporates heavy duty bushing supported hinge pin blocks, the same concept incorporated into other world caliber touring cars by Tamiya, Yokomo and Hot Bodies. The steel insert bushing insure ultra free suspension movement, no matter the arm angles. The set includes 4 heavy duty 7075 suspension blocks, FF-C, FR-B, RF-XB (split style), RR-D and together will give you .5 degree of front arm sweep and 3 degrees of rear toe.

View more images of the XR3’12 here

April 5, 2012

Xray RX8 2012 spec conversion kit

Xray have released a conversion kit to bring the RX8 up to 2012 spec. The set includes the new 5mm aluminium chassis, front upper and lower suspension arms, front lower graphite extension for suspensions arms, composite steering blocks for graphite extension, graphite extension for steering block, rear lower composite suspension arm for graphite extension and the extension. Other parts include new 8mm 2-speed shaft, graphite radio plate, XCA universal clutchbell, aluminium flywheel and clutch disk and the necessary screws.

Source: Xray [teamxray.com]

April 1, 2012

Xray News Round-up

Here we have this weeks round up of product releases and race reports from our site sponsors Xray. Our summary includes everything published by the Slovakian manufacturer on their own website in the past week, so if you didn’t find the time to visit, be sure to read on. This weeks round up includes the following stories.

– X12 Wins 2012 Austrian National Championship
– X12 Wins 2012 German National Championship
– Maciek Brzozowski joins Team XRAY
– XRAY T3’12 TQ + 2x WIN US ROAR Carpet Nationals 2012
– XB9 & Reno Savoya TQ & 2nd at Psycho Nitro Blast

Click here to view the round-up

March 20, 2012

Zeppin Racing TC6.1 & T3 2012 top decks

Zeppin Racing have released new 2mm flex top plates for the Team Associated TC6.1 and Xray T3 2012. The original top plate for the TC6.1 was engineered for firmness and in addition the upper deck is too wide meaning it touches the motor which restricts flexing. This newly designed 2mm thick top deck is 2mm narrower (-1mm each side) to avoid touching the motor, plus extra holes provide a bit more flex in order to improve overall traction. Aiming for more steering on the T3 chassis, they have deliberately made a narrower top deck to increase steering, especially in mid corner.

View the T3 top deck here

March 16, 2012

Xray RX8 ventilated brake disc

Xray have introduced this lightweight, heat-treated and precision-ground ventilated brake disc for the RX8. CNC-machined brake disc is balanced for vibration-free operation. Strategically-placed holes allow for ultra-cool operation without overheating, ensuring consistent and efficient braking to minimize brake wear and disc glazing.

Source: Xray [teamxray.com]