Red RC » Xray

March 2, 2020

Willspeed YZ2 Cal 3 & XB2 Take One D arm mounts

Following their B6.1/B6.2 Take One D arm mount Willspeed now also roll out D arm mounts for the Yokomo YZ2 and the Xray XB2 2020 and 2019 kits. Designed for carpet racers, The TakeOne D hangers remove 1 degree of in-board toe-in, racers to achieve 0.5 and even 0 degrees in-board toe. The capable in-board toe-in range is 0 to 3 degrees with no change to anti-squat adjustment. Removing toe allows the rear axle to act more efficiently, reducing tyre scrub, increasing mid corner rotation and increased on power steering. The parts come machined from high-quality aluminium and the are anodised clear for a shiny silver look.

View the XB2 D mount here

March 2, 2020

Rebellion-RC T4’20 Crossflex aluminium chassis

RC-Carbonstore have introduced their new Rebellion-RC Crossflex aluminium chassis for the popular Xray T4 2020 mid-motor touring car. The chassis was developed for the use in medium to high-bite traction conditions with its highly machined design allowing for optimised flex characteristics that can be greatly influenced with the use of up to twelve optional brass inserts that not only add weight in the lowest area of the chassis, but they can also be used to change the overall torsional flex characteristics. The idea was to become able to adjust the weight-balance as well as the flex individually with every insert by using different fixing positions without the need of changing the whole chassis; with a standard chassis being always hard front/rear or soft front/rear, but not hard front/soft rear. When the brass inserts are fixed at a 90 degree angle to the driving direction they almost have no influence to the flex, but if attached using the remaining – cross-positioned – mounting points, the inserts decrease the flex. To make the system work the fixing points for the “hard” setting are 0.3mm lowered to make for a free movement at “flex” setting, and when using the “hard” setting drivers need to insert the included 0.3mm shims to be able to access the desired “hard” flex settings. The chassis is machined from high-quality aluminium, it comes black anodised for wear and looks, features a laser-engraved Rebellion-RC logo and it weighs in at 83g alone and up to 130.9g using the optional brass inserts.

View more images here

February 28, 2020

Xray XB8’20 1/8th nitro buggy kit

Xray have introduced the latest incarnation of their highly successful XB8 1/8th scale nitro buggy platform, the XB8 2020. This year’s variant of the company’s IFMAR vice World Championship and EFRA European Championship winning buggy features some subtle updates and improvements that still target pretty much every aspect of the buggy, be it the chassis, drivertain or suspension. And so the 2020 variant builds on a redesigned 3mm 7075-T6 aluminium chassis that is 4mm longer for improved overall stability while the included hard composite radio box increases chassis rigidity and handling consistency. The harder composite material also retains its stiffness in very high temperature conditions.

Continue reading here

February 28, 2020

Xray XB8 & XT8 IFMAR-legal rear wing

Xray have announced the release of their new IFMAR-legal rear wing for the XB8 and XT8 off-road vehicles. The stylish rear wing was designed to provide the appropriate amount of downforce and generate required stability for the car. Made from a strong special composite mixture, the wing will survive severe abusive and extreme crashes while keeping its shape. Taller sides plates improve high speed stability, meet IFMAR rules and the wing is available in black, white or fluorescent yellow colour.

View the colour variants here

February 26, 2020

Xray GTX8 & GTXE aluminium shock plates

Xray have announced the release of their new aluminium shock plates for the GTX8 and GTX8 1/8th scale GT cars. The machined 7075-T6 aluminium extensions can be used on both the front and rear lower suspension arms. They allow to mount the shock absorbers in a more outside position which helps to increase corner speed while improving the stability of the car. The black anodised and laser-engraved plates come as pairs and including mounting hardware.

View another image here

February 25, 2020

Xray XB2’20 & XB4’20 -2mm alloy spring retainers

Xray have introduced new -2mm aluminium shock spring retainers for the 2020 variants of the XB2 and XB4 kits. The spring collars allow to access lower ride height settings, something that comes in handy especially when running on smooth high-bite carpet tracks. The spring retainers are machined from high-quality 7075-T6 aluminium, they come in sets of four and also fit the XT2 and XT4 trucks.

Source: Xray [teamxray.com]

February 24, 2020

Xray XB8 series large volume alloy diff case

Coming from Xray and made for all XB8 series kits is a large volume aluminium differential case. Machined from Swiss high-quality 7075-T6 aluminium and coming hard-anodised the large volume diff case will offer higher resistance to overheating in long mains while ensuring super-smooth and efficient diff operation, extended lifespan of the oil due to lower heat build-up, and also higher precision. The diff case is usable with the XB8’19, XB8’18, XB8’17, XB8E’19, XB8E’18, XB8E’17, XT8’19, XT8’17, XT8E’19, and GTX8’19 kits.

Source: Xray [teamxray.com]

February 21, 2020

RC-Cox T4’20 FF & FR brass suspension mounts

PPM RC Racing have introduced the new RC-Cox FF and FR brass suspension mounts for the Xray T4’20 touring car. Machined from high-quality brass material each suspension mount adds 9g of weight, which allows to adjust the car’s overall weight balance according to the track conditions or driving style. The suspension hangers feature machined Cox logos for brand recognition, they are available separately and fit all chassis that allow to access the T4 2020’s standard narrow suspension mount positions.

View more images here