Red RC » Xray

February 25, 2019

RC-Cox T4 aluminium front solid axle outdrives

Coming from RC-Cox and made for the Xray T4 series of touring cars are front spool driveshaft adapters. The outdrives are machined from lightweight yet strong 7075-T6 aluminium and are finished with a special coating for improved wear resistance. Also included are C-shaped driveshaft blades in black colour. The driveshaft adapters are usable for all T4 series cars and they help to reduce rotational masses for quicker spool-up and thus better acceleration.

Source: PPM RC Racing [ppm-rcracing.com]

February 22, 2019

Xray T4F 1/10th FWD touring car kit

Following a couple of body-on teaser images, Xray have finally unveiled their all-new T4F 1/10th front wheel drive touring car kit. With the FWD concept being a first for the Slovakian manufacturer, the car still shares about 90 percent of its parts with the company’s ultra-successful T4 4WD touring car platform, making spare parts stocking easy while allowing for a simple, efficient and easy to work on platform. The car was developed and tested in cooperation with Germany’s Harald Schmittgen and it makes use of a narrow 2.2mm thick carbon fibre chassis that features predrilled locations for the adjustable battery mounts and optional chassis weights, making for a super reactive and easy to control car in all track conditions. A specially-developed 2.0mm graphite top deck is a universal solution for both low and high-bite tracks, providing both exceptional traction and side bite.

View more details & images here

February 22, 2019

Xray XB8 series medium rubber shock membrane cell

Xray have introduced their new medium hardness rubber shock membrane cell set for XB8 based buggies, trucks and GT cars. The special design of the volume compensator provides a smaller air gap compared to conventional rubber diaphragms, resulting in more consistent damper action throughout the whole run. The red medium hardness cells will also offer more rebound compared to the previously released soft set, making for improved traction on smoother surfaces. The membranes come in sets of four and they are usable for the nitro and electric variants of the XB8, XT8 and GTX.

Source: Xray [teamxray.com]

February 21, 2019

Nejc Mihelic joins Xray

Xray have announced the addition of multi-times Austrian and Slovenian IC track champion, Nejc Mihelic to their team. The former ARC driver will campaign Xray’s RX8 platform at national and international events including the Austrian and Slovenian Nationals, the XRS as well as the ENS and he has the following to say:

I’m super happy to join team Xray. I look forward working with the whole team and learning the new cars. I want to thank Xray for this opportunity to be a part of a very strong team. The quality of the products and team speaks for itself. See you all very soon at the race track. I want to thank ARC for the last 5 years. In the past we achieved great goals and claimed many wins.

Source: Xray [teamxray.com]

February 21, 2019

Xray 4S C=3.0 touring car springs

Xray’s 4S super short touring car shock springs are now also available in a hard C=3.0 variant. Adding to the already available 2.3 to 2.9 linear springs, the super hard set comes in handy when running in high to very high bite track conditions. Like all other Xray springs, the 3.0 are manually measured, selected and matched into pairs to guarantee equal length and damping characteristics and they not only fit Xray cars but many other brands.

Source: Xray [teamxray.com]

February 21, 2019

Zero Tribe working on T4 mid motor conversion

Japanese brand Zero Tribe, known for their popular Xray T4 FWD conversion, have released first renderings of a mid motor conversion for Xray’s T4 electric touring car. The design is inspired by Tamiya’s TA05 car and Awesomatix’s A800 MMCX mid motor conversion, with the equal length front and rear belts making for quicker and more even throttle response while the placement of the somewhat heavy motor creates an optimised overall balance. The kit will allow the use of shorty-type LiPo batteries as it is a developing trend when running indoors. We bring you more information on the kit as they surface.

View another image here

February 19, 2019

T-Works XB8’19 titanium turnbuckle & screw sets

Coming from T-Works and made for the Xray XB8’19 buggy are a titanium turnbuckle as well as two screw sets. Starting with the turnbuckle set, the 7-piece kit is made of high-quality 64 grade material and it replaces the standard spring steel turnbuckles with lighter and more shiny items. Included with the turnbuckles come two suitable 4mm and 5mm wrenches. As for the screw sets, T-Works have released a 149-piece UFO head titanium and a 149-piece gold-colour steel screw kit. The latter will mainly add bling while the titanium set makes for more visual impact, a lower weight and higher corrosion resistance compared to the original steel fasteners.

View the screw sets here

February 18, 2019

Xray XT2 adjustable gearbox height options

Xray have introduced new option parts for the XT2 2WD stadium truck that allow to adjust the gearbox and rear suspension mount height of the vehicle. The range includes two 2mm carbon fibre gearbox height adjustment plates, with the T-shaped plated also raising the RF and RR suspension mounts, that can be used separately or stacked to achieve the desired driveshaft angle while the two optional -2mm and -4mm 3-gear front-mid motor plates allowing to lower the motor for an overall lower centre of gravity. By adjusting the gearbox height and lowering the chassis ride height, more forward traction, and less chassis roll in corners can be achieved. All parts are available separately, allowing to mix and match for the desired combination of gearbox, motor and chassis height. A full explanation of the accessible height options can be found here.

View the other new optionals here