Red RC » Yokomo

October 7, 2015

Yokomo YZ-4 1/10th 4WD buggy kit

During this week’s 2015 IFMAR Electric Offroad World Championships Yokomo’s all-new YZ-4 1/10th 4WD electric off-road buggy is making a first public appearance following its stealthy debut at the opening round of the 2015/16 EOS. Designed by Shin Adachi the car features a totally new drivetrain layout with dual 2WD-style 3-gear transmissions on ether end which are coupled by dual drivebelts to replace the shaft drivetrain of the proven yet slightly ageing B-Max4 car. The setup allows to use very small gear differentials without having to worry skipping belts while the overall design also results in an easier to drive and less edgy car.

Continue reading here

September 29, 2015

Yokomo YZ-2 front swaybar set

Available now from Yokomo is a front swaybar set for the YZ-2 2WD buggy. Included is all needed mounting hardware as well as three different diameter swaybar wires of 1.0mm, 1.1mm and 1.2mm. The anti-roll bar allows to adapt the buggy to a range of surfaces with the set coming in handy especially on high-grip tracks.

Source: Yokomo [teamyokomo.com]

September 27, 2015

Yokomo YZ-4 coming soon

Having won last weekend’s opening round of the Euro Offroad Series in Germany in the hands of Lee Martin, Yokomo have released the first information on the new YZ-4 4wd buggy. A big focus has been placed on the transmission of the YZ-4 with a new type of drive-train that offers benefits over the conventional belt and shaft drive configurations. We expect to receive full details on the new buggy in early October, coinciding with the IFMAR Worlds at the Yatabe Arena, while the first shipment is expected to be in early November.

Source: Yokomo [teamyokomo.com]

September 25, 2015

SMC YZ-2 brass weight kits

Coming from SMC and made for the Yokomo YZ-2 2WD buggy are two brass weights in the form of front rear pivot plate and the front motor plate brace. Designed to adapt the car to lower bite conditions the brass weights will make for a less aggressive forward weight distribution by adding weight to the rear end without harming the buggy’s mid corner speed. The front rear pivot was designed to take up all the space between the transmission and the motor while still providing critical anti-squat clearance with or without the kit shim. SMC pushed the block into all the nooks and crannies they could and not simply copied the design of the standard part with this resulting in a whopping 68g or rearward weight shift. The front motor plate brace in the kit is a small aluminium L brace, but the new part filled up the space under the waterfall as much as possible. Full motor displacement is still available, as well as clearance for the rubber pad under the brace with the motor plate attachment hole is still usable too. The motor brace place weighs in at 34g and the two parts are available separately or as combo kit.

View another image here

September 16, 2015

Carson Wernimont teams up with Yokomo

Yokomo have announced the signing of Carson Wernimont to their electric off-road factory team. The multi-year deal will see Carson attending at events around the World and his campaign officially kicks off at round one of the EOS this coming weekend at the Nürburgring in Germany were he will be joining team mates Lee Martin and Marc Rheinard. Carson says:

I am super excited to be joining Team Yokomo! From my testing I’ve been doing the cars were awesome, and the team environment was awesome and it will be a great fit going into the 1/10th World Championships and the future! I want to say thank you to Tom Yokobori, Aso Minoru, Robert Itoh, Shin Adachi, and Lee Martin for all helping out and making this happen! Looking forward to what the future holds!

Source: Yokomo [teamyokomo.com]

September 4, 2015

Mckune Design FR4 high bite vented slipper pads

Mckune Design have released their new FR4 vented slipper pads specifically designed for carpet, astro turf, and high bite clay. CNC-machined from FR4 epoxy fiber glass, the innovative vented design provide a consistent feel throughout the run without fading. They are available now for Team Associated, Yokomo, Kyosho, Schumacher, and Xray off-road vehicles.

Source: Mckune Design [mckunedesign.com]

September 3, 2015

New Yokomo pit bag coming soon

Yokomo will soon have a new pit bag available. Sporting an updated outer design the bag features three equal-size inner drawers as well as several outer pockets for items such as a setup board and setup tools. Sturdy wheels and a tough extendible handle round out the package. The bag will become available by the end of September.

View another image here

August 6, 2015

T-Work’s BD7 & Pro 5 front spool

T-Work’s have released this new front spool for the Yokomo BD7 2015 an the HB Pro 5 electric touring cars. The main housing of the spool is machined from 7075 aluminium for lightweight while for strength the spool cups have been made from high quality spring steel. The set comes with all fasteners to assembly the spool minus the kit pulley.

View an image of the unassembled set here