Red RC » Accessories

July 4, 2017

Vigor RC BD8 ball-raced anti-roll bar mounts

Vigor RC have introduced ball-raced anti-roll bar mounts for the Yokomo BD8 touring car. Machined from 7075 aluminium and coming black anodised and with silver edge details, the parts will directly attach to the car’s front and rear bulkheads and their design with ball bearings makes for greatly improved precision and smoothness, resulting in greater suspension efficiency. The parts also do away with the need to adjust the swaybar slop, making for more convenient car building, maintenance and set-up. The set includes four mount and bearing and it is usable with the original centre swaybar tube.

View another image here

July 3, 2017

MIP TLR 22 carbide diff rebuild kit

MIP have introduced the carbide diff rebuild kit for all TLR 22 series vehicles. This package includes tungsten carbide diff balls, diff rings, a 2-piece captured thrust assembly, machined aluminium T-nut, as well as a new spring and screw. The entire diff rebuild combo pack replaces all necessary diff components and it fits all 22 series buggies and trucks.

Source: MIP [miponline.com]

July 3, 2017

Capricorn P1-235 front chassis plate

Coming from Capricorn and made for the P1-235 1/10th scale pan car is a new front chassis plate. The updated design allows to move the servo towards the front end of the car, leaving enough room to fit a standard-size LiPo in the battery compartment and not being limited to shorty battery packs. As a result more powerful motors can be used while also allowing to play more with weight distribution.

Source: Capricorn [capricornrc.com]

July 3, 2017

Infinity IF14 aluminium cooling fan mount

Creation Model has produced a limited run aluminium cooling fan mount for its Infinity IF14 electric touring car. The mount, which comes complete with a 40mm fan, fixes to the chassis behind the motor and is held in place with a single screw and incorporated mounting pin. This method of securing the mount to the chassis minimises any effects on chassis flex. Also able to take a smaller 30mm fan, two screws fix the fan to the red anodised aluminium mount.

Source: Creation Model [creationmodel.net]

July 2, 2017

SWorkz 1/8th pinion gears

SWorkz have expanded their range of 1/8th scale pinion gears by 18T, 19T and 20T variants. The module 1 gears are precisely cut, they feature laser-engraved markings for easy identification and they are usable for all 1/8th vehicles with module 1 main gears.

Source: MW RC Cars [mwrccars.at]

June 30, 2017

Tekno SCT/SL low frequency springs

Tekno have introduced a complete line of Low Frequency springs for the SCT410.3 and EB48SL vehicles. The new design improves traction by reducing chassis oscillation on rough track surfaces and large jump landings. Better stability of the vehicle is achieved, providing more forward grip, increased corner speed and quicker lap times. The spring length has been reduced by 13mm in front and 15mm in the rear to allow for lower ride height adjustments which in turn increases corner speed under high traction conditions, such as carpet or astro-turf, where lower ride heights are essential. With additional coils as well as a larger wire diameter, the new LF springs feature a natural silver finish with a colour indicator for easy spring identification. They directly replace existing springs and are intended to be used on the SCT410, SCT410.3 and the EB48SL vehicles. The set includes two springs and available are five front and five rear sets.

View the rear springs here

June 30, 2017

VRP E817 aluminium servo mount

Coming from VRP is an aluminium servo mount for the HB Racing E817 off-road buggy. The mount takes the place of the stock plastic mount, which can be sloppy and move under load from the servo. The VRP mount is CNC-cut from American grade 7075 aluminium, it comes black anodised and laser-etched, and it includes three aluminium servo mount posts to secure the mount to the chassis.

Source: VRP [visionracingproducts.com]

June 30, 2017

T-Works YZ-2 DTM Hybrid & full titanium turnbuckle sets

Coming from T-Works and made for the Yokomo YZ-2 DTM 2WD buggy are the Hybrid and full titanium turnbuckle sets. Both include the steering and camber link turnbuckles with the Hybrid set being made up using titanium links with aluminium hex portions with the full titanium set includes 1-piece turnbuckles. Both sets are direct replacements and they include a suitable 4mm wrench.

View the full titanium set here