Red RC » Accessories

June 13, 2017

Serpent 4X vertical top-deck option

New for the Serpent 4X comes this double vertical top-deck and top-deck stiffeners. The new top-deck is the base for all the new flex options and it consists of two equal shaped vertical oriented 2.5mm carbon fibre plates. The plates are connected to the front and rear suspension with a machined aluminium adaptor plate and unlike flat top-decks, the vertical oriented double top-deck still allows for a lot of linear torsional flex, but basically eliminates any longitudinal tweaking and reduces torsional tweak drastically. It can be run in addition to the kit aluminium centre stiffener. The H-shaped stiffener plate can be removed when the top-deck is used to create more flex in the front and rear section of the car. To stiffen up the assembly further, there are two top-deck stiffeners available which connect the vertical double top-deck to the centre stiffener/motor mount assembly. Both can be used individually, to tune front and rear flex individually.

Source: Serpent [serpent.com]

June 12, 2017

JConcepts B6 & B6D rear suspension mounts

JConcepts adds to their line-up of accessories for the B6 & B6D with C mount & D mount blocks in aluminium and brass. The aluminium versions are available in blue and black colours, the precision machined piece carefully crafted to accept the standard Team Associated pill inserts. Lightweight enough for the weight conscious racer but beefy enough to stand-up to the rigours of high-end modified buggy racing, the brass version add up to 12g and offer some low mounted weight for added rear-end stability and grip. All mounts feature chamfer highlighted edging which improve the curb appeal and bring out the lustre in any show or race ride.

View the D mount blocks here

June 9, 2017

Carpricorn Formula/Pan Car thrust bearing spacer

Capricorn have released a small but important item for their Formula and Pan Car platforms. The new thrust bearing spacer, shown in the image between the bearing and hub, is designed in order to house part of the thrust bearing allowing for an easy assembly of the parts on the axle.

Source: Capricorn [capricornrc.com]

June 8, 2017

BMT 701 & 984 option parts

New from BMT for their 701 and 984 platforms come these option parts, beginning with this brass battery support. Adding an additional 50 grams to the 984 it can be used to fine tune the car’s balance and is a direct replacement for the original part. For the 701 there are two different pairs of wheel hubs in -0.75mm and +0.75mm versions as well as updated reinforced engine mounts.

View the other new products here

June 7, 2017

Xray NT1 1.8mm rear anti-roll bar for ball-bearings

Xray have introduced a new 1.8mm rear anti-roll bar for the NT1, made from special spring steel material. The wire anti-roll bar is used to increase steering response on small, technical tracks and rear traction and is mounted to the bulkheads from the outside, for quick & easy changes and adjustment. The bar turns in ball-bearings for maximum precision and freedom of movement and anti-roll bar height can be quickly & easily adjusted.

Source: Xray [teamxray.com]

June 7, 2017

Capricorn F1/Pan Car rear ride height slides

Capricorn introduce this new set of rear axle mounts for their F1 and Pan Car platforms. The slides allow for a bigger ride height adjustment range and have been conceived to cater for the new, smaller diameter wheels on the market at the moment. The left and rear slides are sold separately.

Source: Capricorn [capricornrc.com]

June 6, 2017

Fenix Racing Associated F6 option parts

New from Fenix Racing, for the Associated F6, comes a full set of 7075 aluminium option parts. The new chassis weighs in at just 84 grams and sports some important features such as the ability to use straight or angled links and a more slim profile of the outer “wing” sections to further reducing scrubbing during cornering. One of the more interesting new parts is the caster adjuster, that allows you to change caster in a matter of second without having to find the right insert. To complete the set there is a 2mm thick 7075 motor pod.

View the different parts here

June 6, 2017

RDRP XB4 brass suspension mounts

Coming from Revolution Design Racing Products are new Brass Suspension Mounts for the Xray XB4 series of buggies. Machined from black-coated brass and sporting gold-colour chamfered edges the parts weigh in at 13g (FF/RR) or 15g (FR/RF) respectively and they add valuable weight to the front or rear end of the buggy. Used in the front the added weight makes for an easier to drive car especially in high traction conditions while in the rear the increased weight leads to improved traction on low grip. Used throughout the buggy the increased mass of 56g will make for a more planted ride over ruts and bumps. All mounts are available separately, the utilise Xray’s I.S.S. suspension inserts and they can be used in either combination with the original alloy mounts.

Source: RDRP [revolution-rc.com]