Red RC » Accessories

August 20, 2015

Exotek D413 aluminium & steel suspension options

New from Exotek and made for the HB D413 1/10th scale 4WD off-road buggy are 10 degree C-hubs, 12mm front locking alloy hexes and high tolerance flanged bushings. Starting with the castor hubs, the heavy duty 7075 aluminium and precision machined parts weigh it at only 5.5 grams per piece and they are much stronger and stiffer than the stock plastic hubs, for optimum suspension action and reduced play. They come polished and anodised in factory orange. The hubs match the stock geometry and accommodate a, not included, set screw for the hinge pin.

Click here to continue reading

August 20, 2015

Xceed rim reamer & 3-in-1 tool

Xceed have two new tools available in the form of a rim reamer for 1/8th on-road wheels as well as a 3-in-1 turnbuckle and ball cup wrench. Starting with the reamer, the tool is designed to slightly widen the wheel axle hole of 1/8th on-road wheels to make for a better fitment on the wheel axle and thus faster and more easy pitstops. The tool is made from high-quality springsteel and green anodised aluminium. Also new is the ball cup remover and turnbuckle wrench. Designed for the use with small ball cups as well as 3mm and 4mm turnbuckles the tool helps to easily pop-off ball cups from the ball joints while the stepped design of the turnbuckle portion does away with the need to carry different size tools. The wrench is made from laser-etched high-quality spring steel.

Click here to view the ball cup and turnbuckle wrench

August 20, 2015

MIP 5ive-T Super Diff Kit

MIP have introduced the Super Diff Kit for the Losi 5ive-T large scale vehicle. The multi-piece set makes for improved efficiency, enhanced durability, and less overall weight by utilising high-quality 7075 aluminium cross pins and machined alloy pin supports. The parts reduce the overall rotating mass and help with oil cooling while making for improved gear alignment at the same time. Also included are high-quality steel sun gear washers. The parts are a direct fit to the standard 5ive-T differentials.

Source: MIP [miponline.com]

August 20, 2015

JConcepts B5 series Finnisher front & rear wings

JConcepts have a range of new front and rear wing for the Team Associated B5 series of buggies available. First up is the 6.5″ Finnisher rear wing for B5M buggies. The wing features a high-attack design with trimable rear gurney options and it offers a radical, edgy design which functions and compliments the Finnisher and Silencer body design. The wing mounts low on the vehicle allowing for a lower centre of gravity which is important in high-grip conditions. The lightweight wing features reinforcement ribs to increase lateral stiffness throughout the centre while the hi-clearance areas built into the side-dams allow for rear tyre movement and growth. Cut lines are included for easy trimming while wing mount dimples are included for a drop-fit onto the popular B5M vehicle.

Click here to continue reading

August 19, 2015

Xray 1/10th pan car soft front springs

New from Xray and made for the X1, X10 and X12 pan cars are two additional sets of front springs. Coming as soft C=2.5 and ultra soft C=1.5 variant they add to the already existing C=2.0 and C=3.0 soft springs for a wider range of adjustments. The colour-coded springs come in sets of two and they fit Xray’s 1/10th and 1/12th vehicles as well as many other cars.

Source: Xray [teamxray.com]

August 19, 2015

New Xceed gear diff oils & various wires

Xceed have expanded their range of high-viscosity gear differential oils and high-quality wires. Starting with the diff fluids, available now are the extra heavy 500,000cst, 1,000,000cst, 1,500,000cst and 2,000,000cst variants all of which come in handy 50ml containers with large openings and eady-to-read stickers for easy identification. Also new is a range of wires such as 180mm and 200mm soft sensor wires in black, blue and red colour as well as a 150mm saddle pack balancer and charge harness, a 100mm jumper wire pre-soldered with 4mm bullet-type connectors and a black universal plug 180mm servo and ESC wire.

Click here to view more photos

August 19, 2015

Schumacher KF2 high roll centre kit

Schumacher’s new and simple high roll centre kit for the Cougar KF2 raises the rear inboard hinge pin height in order to alter the rear roll centre settings. The option part stiffens the car in roll which keeps the rear end of the buggy flatter through corners, and it is recommended for high grip surfaces.

Source: Schumacher [racing-cars.com]

August 19, 2015

Schelle AE V2 12mm shock pistons

With the release of the latest V2 “screw-on” style Team Associated 3mm shock shaft, Schelle Racing Innovations came up with some new 12mm shock pistons to fine-tune the shock setup. Available in the popular sizes 2×1.6, 2×1.7 and 3×1.4, each size is available in either a traditional flat piston or in a bevel design. The CNC precision machined Delrin pistons offer a precision cut outer diameter with smooth machined outer edge while the tight fit to the shock body reduces wasted blow by around piston edges. Each package contains two pistons, tuning guide, and bevel piston supplement.

Source: Schelle Racing Innovations [schelleracing.com]