In addition to the 2.0mm soft carbon fibre top deck for the Xray T4’15 Avid now also have a soft 1.5mm version available. Cut from premium carbon fibre which utilises a standard angle layup to allow for more flexing and twisting the 1.5mm soft deck is recommended to increase performance on asphalt and green carpet tracks in combination with the Avid 2mm aluminium chassis.
Source: Avid [avidrc.com]
Italian company Sprint RC have released a first rendering of their forthcoming single battery conversion kit for the Serpent 977 1/8th nitro on-road car. Designed for the use with TTB brushless motors and a single 4S 14.8V LiPo battery pack the set will improve the handling of the car as the weight is more centralised compared to a setup with two split packs hanging left and right from the chassis. The conversion includes a mounting plate for the motor, a new carbon fibre radon plate with steering servo and receiver mount as well as a gear adapter. Also new is a rear carbon fibre body stiffener for 1/8th bodies. The part is designed to improve the rigidity of the rear fender and spoiler section and it is usable with many of today’s 1/8th on-road bodies.
Click here to view the body stiffener
Shepherd introduce the new Team Edition clutch for the Velox V8 and other 1/8 nitro cars. Based on the successful Velox Competition Clutch with the famous extra-hard clutch spring the new state-of-the-art lightweight reverse type clutch is meant to offer excellent performance without any compromises. Featuring a black anodised 7075 T6 aluminium flywheel, a shiny aluminium pressure plate, special compound fly weights, a yellow PTFE clutch shoe, a clutch bell with optimised surface and the famous extra-hard Shepherd clutch spring the Team Edition clutch will deliver consistent engagement and a powerful acceleration. To complete the set a 16T and a 20T hard coated aluminium pinion, high quality bearings and the needed fastening material and shims are included. All parts are also available separately.
Source: Shepherd [team-shepherd.com]
Exotek have new aluminium option parts for the Xray XB4 available in the form of 9 degree C-hubs and a steering crank set for the ’15 Spec kit. Starting with the hubs, the heavy duty and precision machined parts are made from 7075 aluminium and they are designed to fit any XB4 series vehicle. Machined down to 6 grams per piece they are still much stronger than the stock plastic hubs and they are made to match the stock geometry. Polished and anodised in factory orange or black the hubs come laser etched for easy left and right identification and they accommodates a set screw for the hinge pin.
Click here to continue reading
Capricorn have a new Tesla .21 nitro on-road engine available. Offering a 9-port design the Max Fantini tuned engine offers the exact same specifications as the one used by Dario Balestri to grab the TQ and finally the runner-up spot at opening round of the 2015 ENS and thus it sports a 16.85mm stroke and a dual-balanced crankshaft.
Click here to see the internals
Scorpion have a couple of option and replacement parts for their Vanguard brushless speed controller available. First up is a 25mm high-speed cooling fan with improved airflow over the standard part. It is housed in an aluminium case for improved rigidity and additional cooling surface. The fan comes black anodised, with silver chamfering and laser-etched graphics.
Click here to continue reading
JQ Products have new optional long front driveshafts for the White Edition THECar buggy available. They come in handy especially when using the hard arms which are 1mm longer, or the lower hole on the C-hub. The longer shaft will keep the dogbone from popping out of the diff outdrives under a heavy landing or crash.
Source: JQ Products [jq-products.com]
New from Trinity come 48 pitch pinion gears and a charging lead for 2S LiPo battery packs. Starting with the pinions, the ultra-light and hard anodised aluminium gears are designed mainly for off-road racing and they come in 17T to 45T sizes with the tooth number being etched into the gears for easy identification. Machined to the tightest tolerances the gears run very true and they allow for quicker spool up thanks to a lower rotation mass compared to steel pinions.
Click here to continue reading
