Red RC » Cars

March 15, 2018

Shepherd Velox E8 4S 1/8th electric on-road kit

Shepherd have introduced the new Velox E8 4S 1/8th electric on-road kit. Based on the Velox E8 platform, the car was developed to meet the demand for a cost-efficient and high-performance electric car that complies with the regulations of the newly created EFRA 1/8th electric on-road class. The updated radio-plate now takes two shorty-LiPos as well as the speed controller. The batteries are centred in the middle of the vehicle allowing for optimal balance. By positioning them as far backward as possible the traction was improved significantly, which is required when using high-torque electric motors. The speed controller is mounted directly on the chassis for easy access and good cooling efficiency. The redesigned motor mount accommodates a variety of different 1/8 electric motors and a built-in carbon fibre fan mount allows the installation of a large 40mm fan. The symmetrical chassis plate is characterised by ventilation openings and supports the cooling of the electronic components. The kit will hit stores very soon.

View more images here

March 14, 2018

Yokomo YZ-2caL2 2WD high-grip spec buggy kit

Yokomo have introduced their new YZ-2caL2 2WD buggy kit that was designed especially for high-grip carpet and astroturf surfaces. The fully equipped kit uses the DNA of the successful YZ-2CA with subtle updates further increasing performance and durability on high to very high traction tracks. The kit will hit stores by end of March and will include parts such as front gullwing and rear S4 suspension arms, new 5.5mm HD ball ends, a aluminium centre link, alloy bellcranks, a 3-gear laydown gearbox with 3-pad slipper clutch, a high-capacity gear differential as well as a graphite battery plate and a new gearbox support. The kit is topped off by a JConcepts YZ-2 lightweight body shell and a LMR rear wing.

View a list of the features and more images here

March 14, 2018

Awesomatix A800FX FWD touring car – Prototype images

Awesomatix’s Max Mächler has released a couple of images of the company’s A800FX touring FWD prototype. The car builds on the A800X 4WD tourer, however a new chassis layout and belt-driven front wheel drive gearbox greatly change the appearance compared to the previous prototype that saw an unconventional “behind the front wheels” motor position. The new prototype is now a lot more up to date with current designs in terms of weight balance while the Awesomatix’s signature rotation dampers make for the very low overall centre of gravity that the original 4WD tourer takes profit of. The car is still in prototype stages with a lot of ideas still in the pipeline.

View more images here

March 13, 2018

Yokomo YD-2EXII RWD Drift chassis

Having taken top honours at the D1-10 World Championship in the Netherlands twice, the high-end RWD chassis kit YD-2EX has been improved for use on low traction surfaces and the Yokomo YD-2EXII will be released at the end of this month. The key feature of YD-2E series is the low centre of gravity for performing high speed drifting in any type of surface condition. Wanting to improve further Team Yokomo developed and tested new front steering blocks for more steering angle and wider tread and shorter lower arms for amazing traction on all surfaces and now these new parts come as standard. Also featuring new low friction shocks and graphite main chassis which enables the use any type of batteries released for 1/10 scale RC cars in a variety position.

View more images of the car here

March 3, 2018

Infinity IF11 1/10th formula car – First images

During this week’s Thailand International Touring Car Championship held at the Infinity RC Addict track in Bangkok, Creation Model have revealed their forthcoming Infinity IF11 1/10th formula kit. The pan car, that is being raced at the TITC by the team’s Formula development driver Jitse Miedema, is unique in many ways as it features a front monocoque composite chassis to which a short carbon fibre main chassis plate as well as the front suspension and front wing attaches. The result is a realistic looking formula car whose chassis is stiffer that a plain carbon fibre assembly – without the need to use delicate aluminium parts – while still offering good accessibility for the steering servo, receiver and speed controller and along with the rear transversal battery mount with O-ring retainer it also allows for easy battery swaps. The front suspension, that is made up from carbon fibre sheet material, is adjustable using inserts while the rear end utilises class-standard axle height adjustment using shims. The steering assembly is designed in a way to allow the common single bellcrank setup but it can also utilise a dual bellcrank setup if track conditions are calling for it. The car is still in prototype stages but according to Creation Model it is ready for a release before Summer.

View more images here

March 2, 2018

Capricorn F1-02 1/10th formula car kit

Coming soon from Capricorn is the F1-02 1/10th formula car kit. The pan car makes use of a new full-carbon fibre front end with different inserts allowing to admits the caster angle in a 3 degrees to 12 degrees range while the wheel camber can be set in a 1 degree to 2.5 degrees range. The servo has found a new in-line mounting position while the LiPo battery can be attached in an in-line of transversal position – depending on the track’s traction conditions. In terms of the suspension the car offers adjustable front downstops thanks to threaded kingpins and a rear weight balance option allows to fine-tune the weight balance. The kit is rounded out by a rear droop adjustment using a dedicated nut on the centre shock and an aluminium lightweight rear axle comes standard in the kit. The already introduced laser-cut precision shims continue to be used for the adjustment of the front roll centre and rear ride height.

View more images here

February 26, 2018

LaTrax Desert 1/18 Prerunner Color Burst edition

The LaTrax 1/18th scale Prerunner mini-size 4WD truck is now also available in the new Color Burst edition. The ready-to-run vehicle packs race-bred features into a convenient, take-anywhere, 1/18 scale size. Like full-size prerunners, the LaTrax Prerunner is built to be fast and nimble while being extremely durable and able to withstand the rigours of all-terrain racing action. Equipped with a powerful motor, independent suspension, and 4-wheel drive, the Prerunner with everything needed right out of the box. The all-weather electronics defeat the elements—driving through mud, snow, and water. Oil-filled shocks soak up the bumps and jumps, and provide smooth suspension movement over any terrain. The 2.4GHz radio system provides dependable, long-range control. The Prerunner is perfect for any age driver or skill level and comes fully assembled, painted, and Ready-To-Race with the included high capacity 7.2V NiMH battery pack with iD and convenient AC wall charger.

View another image here

February 26, 2018

GL Racing GLR 1/27 RWD chassis kit w/o ESC

GL Racing’s new GLR 1/27th scale RWD chassis kit is now also available in an ESC-less version for those who wish to use their own choice of speed controller. The kit makes use of the same chassis that was introduced some days ago, however it comes without the standard Hobbywing ESC in favour of an aluminium servo mount for the included micro-size servo. The rolling chassis needs to be completed with optional items such as a receiver, 15mm brushless motor, a suitable speed controller, a 47x11x20mm 2S LiPo battery as well as Mini-Z-style wheels, and 98mm wheelbase body shell.

Source: GL Racing [gl-racing.com]