Red RC » Cars

July 14, 2020

RC Atomic DRZV2 1/28th scale drift car chassis kit

Coming from RC Atomic is their new DRZV2 1/128th scale mini drift car kit. The V2 features several new parts such as a redesigned front bulkhead that optimises the chassis’ roll centre for a more responsive steering and better car control in long distance drifts. Also new is a single bellcrank steering assembly that is both precise and easy to assemble thanks to less parts involved. The chassis is 90mm to 98mm wheelbase adjustable with longer wheelbase settings for 1/24th scale body shells being accessible through option parts. Included in the kit are also new brass KPI front steering knuckles for maximised tyre grip in counter steering situations, new adjustable shock spring preload collars and height adjustable body mounts that support 0.5mm increments. An optional mono front damper system is available optionally for maximised steering throw. Not included in the chassis kit are electronics, tyres, wheels and body shell.

View more images here

July 10, 2020

Team Associated DR10 Drag Race Car Team Kit

Team Associated have announced the release of their DR10 Drag Race Car Team Kit. The DR10 Team Kit features a rear anti-roll bar, 26 precision ball bearings, a water-resistant enclosed receiver box, fully adjustable suspension, vertical ball ends for roll centre adjustments, and 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch. It builds on the already released RTR variants, however it it a rolling chassis and does not include electronics, the RC system, tyres or a body shell, allowing the driver to chose his preferred equipment.

View a list of the features and more images here

July 9, 2020

Arrma 1/5 Outcast 8S BLX 4WD Brushless Stunt Truck

Horizon Hobby have introduced the new Arrma 1/5 Outcast 8S BLX 4WD Brushless ready-to-run stunt truck. Driven by 8S brushless power and an Arrma-tough design, the Outcast 8S BLX 4WD delivers the torque, acceleration and speed bashers need for extreme action in 1/5th scale. The ready-to-run stunt truck comes equipped to defy gravity right out of the box. From the heavy-duty front bumper to the wheelie bar in back, it’s engineered to do it all: long, tall wheelies; tight, fast donuts; standing and aerial backflips; high leaps into the air; and more — over all terrain, in all conditions. The truck includes a Spektrum DX3 Smart transmitter and SRS6110AT AVC Active Vehicle Control receiver that take full advantage of the Spektrum Smart Firma brushless motor and ESC’s telemetry capabilities. Users can download the free Spektrum Dashboard App to their mobile device and follow motor RPM, ESC temperature, receiver voltage, drive pack voltage and more data in real-time.

Continue reading here

July 8, 2020

Team Bomber 1/12th scale pan car kit – Coming soon

Japanese brand Team Bomber, known for their option parts for the Yokomo YRX12 1/12th scale pan car, are currently working on their own competition chassis kit. No official details are available yet beside a teaser image but we bring you more details as their surface.

Source: Team Bomber [teambomber.jp]

July 7, 2020

Tekno ET410.2 1/10th 4WD electric truggy kit

Tekno RC have unveiled their new ET410.2 1/10th scale 4WD electric truggy kit. Tekno RC redefined the 1/10th scale truck in terms of enjoyment and versatility when they introduced the ET410 1/10th 4WD competition electric truggy in 2018. By including many of the design features of the EB410 1/10th 4WD buggy, the ET410 was fast and fun right out of the box. It quickly became a fan favourite due to its versatility and performance on a wide variety of tracks. It could be raced on a small indoor track, then with very few setup changes, you could run it on a large outdoor track with rough surfaces and huge jumps. Now with the ET410.2, Tekno have taken the emerging 1/10th scale 4WD truck class to a new level. The ET410.2 includes all of the durability and handling improvements of the EB410.2, such as the taller one-piece adjustable wing mount, adjustable roll centre rear hubs, 3.5mm hinge pins, and HD hinge pin braces. Tekno also includes stronger HD outdrives, new rear arms with front-mounted shocks, as well as brand-new 18-degree low roll centre spindle carriers to smooth the steering response while improving corner speed. Also part of the package are new spindles with adjustable Ackermann plates to allow more precise tuning of corner entry and exit characteristics. The kit will become available by mid-July.

content

July 6, 2020

WRC Racing LM16.3 1/10th pan car kit

Coming soon from WRC Racing is their new LM16.3 1/10th scale pan car kit. The car is based off of the F18.3 and features a multi-functional battery compartment that allows the use of both inline and transversal battery positions, it includes a redesigned chassis and a new, aerodynamic 7075-T6 aluminium front bumper support. The kit is rounded out by a new ball differential.

View more images here

July 6, 2020

Rc Arlos Factory RcA-V1 RWD drift car chassis

Rc Arlos Factory have released first images of their forthcoming new RcA-V1 RWD drift car chassis kit. The first chassis project of the company will feature a highly adjustable suspension components, a rear motor design placed in front of the rear axle as well as mock-up brace callipers and rotors for scale looks. The car will allow for 240mm, 257mm and 275mm wheelbase settings and we bring you more details as they become available.

View more images here

July 3, 2020

JConcepts Regulator Clod Buster chassis conversion kit

Coming from JConcepts is their new Regulator chassis conversion kit for the popular Tamiya Clod Buster rigid axle monster truck. A deep passion for monster truck racing and performance brought JConcepts full circle with the design of the Regulator Stage 2 chassis conversion kit. The design team had several design goals including weight balance, low centre of mass, the use of engineering materials and pinpoint adjustability to fully compliment one of the longest running vehicles in the RC industry. The Regulator focuses on allowing other existing RC components to work alongside of the design such as readily available body designs, shocks, wheels, tires and behind axle servo conversion kits. The key to the Regulator is the positioning of the battery and electronics in a top access layout and placed deep into the chassis for a low centre of gravity. The fibreglass chassis and bottom plates hold the retro straight rail frame physique and at the base of the chassis, the heavy-duty aluminium cradle supports the suspension and ladder bars. In addition, a brass weight is included for racing in a sanctioned competition where a weight limit is used to even the playing field even further. The brass weight is mounted at an incredibly low position and locks into the cradle which aligns perfectly with the low centre of gravity concept.

Continue reading here