Red RC » Electric

June 8, 2016

GForce TS 120A R2 brushless speed controller

Japanese company GForce have introduced their new TS 120A R2 brushless speed controller. Based off of the TS 120A the R2 sports a redesigned case with a more complex heatsink design while internal updates make for a more linear throttle response and improved braking performance and feeling. The 120A rated controller is usable with motors down to 3.5T, it is 3S LiPo compatible and features a 6V/3A BEC system. GForce’s optional Progbox, PC Link or WiFi devices allow for a wide range of adjustments of the ESC that comes with a 12AWG black-colour wire set, high airflow fan and capacitor unit.

View the specifications and another image here

June 8, 2016

SRP 6000mAh Stock Spec LiPo battery

SRP Quality Products have introduced their new 6000mAh 100C Stock Spec LiPo battery pack. Specially developed for stock racing classes the 2S hardcase battery utilises 100C high-performance cells with a low internal resistance and a flat discharge curve for maximum power over the whole run. The pack weighs in at 295g, it makes use of standard 4mm connectors and comes including a pre-wired balancer wire with XH balancer and Deans-type power connectors.

Source: SRP [srpqualityproducts.com]

June 7, 2016

Trinity 24K Certified Plus stock brushless motors

Coming soon from Trinity is the 24K Certified Plus stock racing brushless motor. Based on the standard 24K the Certified Plus went through specific checks to ensure maximum performance. First up the motor’s rotor asymmetry is being checked which is meant to be a crucial part in building a fast motor. Typically a rotor shows asymmetry values of 0 to 30 plus with Trinity’s Certified Plus motors not exceeding a 4. On top of this each motor comes with red-sealed ceramic bearings and pre-set timing specially dedicated for 2-cell off-road, 2-cell on-road touring or 1-cell 1/12th scale applications. The Certified Plus range of motors will include 13.5T and 17.5T variants, they come with dyno printouts and are available soon.

Source: Trinity [teamtrinity.com]

June 4, 2016

Arrowmax 5200mAh low profile LiHV battery pack

Arrowmax have introduced the first in a line of new LiHV battery packs. Made from 5200mAh 110C/55C LiHV cells the battery offers an increased nominal voltage of 7.6V compared to the 7.4V of standard LiPo packs. Using LiHV-compatible chargers a 2S pack can be charged up to 8.7V or 4.35V per cell, allowing for higher output voltage. LiHV packs are also good to be charged to the standard 8.4V for sanctioned races with the flatter discharge curve compared to regular packs making for more punch towards the end of a run. Arrowmax’ 5200mAh pack measures a standard 139x47mm while offering a low-profile height of 22.5mm. The hardcase battery pack is equipped with the now-standard 5mm through-type connector tubes.

Source: Arrowmax [arrowmax-rc.com]

June 3, 2016

Muchmore Hybrid Touch AC/DC balance charger

Muchmore have introduced their new Hybrid Touch AC/DC balance charger. Offering a compact design and a light weight the device is ideal for crowded pit spaces or RC travelling, without cutting on features or performance. With its 80W charge power it allows for up to 10A of charge current at both AC and DC input. Good for up to 6S LiPo packs the device features a touch sensitive and white back-lit screen, temperature controlled fan, internal balancer, and a 5V/2.1A USB port. When it comes to software features the Hybrid Touch sports balance and storage charging modes, discharging as well as cycling functions. Included with the charger comes an AC input wire as well as two 100mm charging leads with Tamiya and T-type connectors.

View the specifications and more images here

June 2, 2016

McPappy Racing brushless chassis dyno 2.0

McPappy Racing have introduced their new RC brushless chassis dyno version 2.0. The device comes in three different sizes, 2WD and 4WD, chassis testing or motor to motor testing, it offers four different load levels, built in flywheel, can simulate an entire race, and with Windows 8 or later, can even be controlled with your voice. The dyno can accommodate anything from a small slot car up to some of the 1/5th scales. Custom sizes are also available.

View more images here

June 1, 2016

Muchmore Impact 7.4V flat & hump style RX LiPo packs

Muchmore have introduced two new 7.4V LiPo receiver battery packs. First up is the flat-type variant that measures 85x29x19mm. It weighs in at 90g and is made using high-capacity 2500mAh cells. It comes pre-wired with a 90mm 20AWG silicone wire with JR-style connector and XH balancer plug. Also new is the 2000mAh hump pack, measuring 54.5×31.5x32mm and weighing in at 91.5g. It comes with a 85mm receiver wire. Both packs are housed in shrink-wrapped soft cases for protection.

View the hump pack here

May 31, 2016

SkyRC Q200 4-output AC/DC balance charger

SkyRC’s new Q200 AC/DC multi-chemistry charger offers a total of four independent outputs to charge and discharge a multitude of RC batteries. The devise is housed in a compact case, measuring 197x182x71mm and it features a 480×320 dot colour LC display, 5-button menu operation and a temperature-controlled internal fan unit. Channel A and B offer up to 10A of charge current while C and D allow for up to 5A of charge current as the internal power supply makes for a charge circuit power of up to 100W combined. The charger is usable with up to 6S LiXX and LiHV packs, up to 15-cell NiXX batteries as well as up to 20V Pb batteries and with SkyRC’s Charge Master software the device can be coupled to a Windows-based PC in order to control and monitor a variety of charge and discharge parameters. On top of this the charger is also controllable using the company’s own iOS or Android mobile devices.

View the specifications here