Red RC » Electric

June 5, 2007

Kyosho Power Zone DS stock 23T motor

Responding to the growth in competitiveness of the recently introduced National stock class in Japan, Kyosho will release this 23T stock motor. Called the Power Zone DS, this new motor features a new can surface for superior thermal efficency which helps keep the motors power consistent while also increasing the motors longevity. The end bell, which is JMRCA approved, allows for advanced angle adjustment and when the motor is introduced in the end of June it will be available in 4 different configurations.

Source: Kyosho [kyosho.com]

June 4, 2007

TCS Cooling system for Brushless

Just last week we wrote about the TCS cooling system that uses liquid as a means to keep your cars electronics cool. Now today we see that a version for brushless systems has been developed that now not only cools the motor, as in the original version, but also comes with a cooling plate that attaches itself to your BL speed controller. According to tests made on the original system it does work but at the expense of some, but not much, weight and also i am not sure if such a cooling system is legal for racing, but with more and more expensive equipment melting on race day perhaps it would be worth considering such a system.

Click here for an installation picture… content

May 31, 2007

Trinity Receiver Packs

In the quest to make the best quality, highest capacity receiver battery packs, Trinity has switched all their models over to the new 1500mAh EP cells. The new EP 1500 mAh cells are super durable and long life. Unlike the no name generic shrink wrapped cells that are flooding the market, these EP cells are high quality and exceed the listed capacity. Available in a 5 cell hump for 1/10th off road, 5 cell stick 1/10th nitro truck and 5cell side x side for 1/8th on-road, all packs weigh in at 125.6 grams and come supplied with the receiver plug.

Click here to see the other packs… content

May 31, 2007

Nosram release range of LiPo cells

Nosram new range of LiPo cells

Following on from yesterdays announcement that Losi have released a range of LiPo cells, comes an even larger line of LiPo battery packs from Nosram, which offer extremely high capacity, an unbelievable 25C discharge rate and less weight than standard NiMH or NiCd batteries.

With a wide range of capacities Nosram covers the needs of each park flyer with type 480 packs up to high power hotliners, 3300 packs. Also every electric car driver has the possibility to use VTEC LiPo batteries. Our special type 1800 pack is a perfect fit in nearly every 1/18 scale car. The type 5000 pack will make any 1/10 electric driver smile with huge power output and incredible runtime at an amazing price.

Source: Mirage Racing [mirageracing.com]

May 30, 2007

Thermal Cooling System – Review

Thermal Cooling System

Back in March we were sent a link to a review of the TCS, Thermal Cooling System, which we showed you back in October of last year when it was first announced. We didnt write about the review at the time because we dont normally cover product write ups and as it was in French we decided it had limited appeal. Now it appears that the review has been translated into English and makes for some interesting reading, especially if you suffer from overheating motors as it appears that the system works very well, so be sure to check it out.

Check out the product review here.

Source: Gaz-On [gaz-on.net]

May 30, 2007

Losi release new LiPo packs & chargers

Team Losi have today announced the release of some new Lipo cells for both receiver and transmitter, as well as new Lipo balance chargers. For 1/8th scale receivers, Losi have released a 7.4V 2000mAh 2 cell LiPo pack, while for transmitters, both are 11.1V 2500mAh 3 cell LiPo packs, but one is configured for use with the Sanwa / Airtronics M11 and MX-3 while the other pack works with the Z-1 and Helios transmitters. Losi also announced the release of a new LiPo Balance charger for 1-3 Cells and an Intelligent LiPo Balance charger for 1-5 cells.

Source: Horizon Hobby [horizonhobby.com]

May 25, 2007

Orcan Motor Cooler & 1/18th Cells

Orcan Motor Cooler

Orcan, who we have written some pieces about before, have come out with some new products to add to their expanding product range. First up is the V2 version of their motor cooler which apart from a new look, has changed very little from the original version from what we can tell. Secondly Orcan have released these VTEC 1400MAh cells for use in the Xray M18 Pro and similar cars and which can cope with the high power demands of brushless systems, especially in the modified class.

Click here to see the cells… content

May 25, 2007

Spintec Battery Manager V2

Dutch company Spintec have released the 2nd version of their Battery Manager, which is a conditioner for 4 to 8 cell packs that can discharge all your batteries to keep them in top shape whilst analysing their performance. The Battery Manager v2 conditions your pack for maximum power and runtime using 10A & 35A Coolflex current conditions while all the time keeping it cool and the built in cut-off voltage is adjustable between 0.8 to 1.1 Volt. Whats really neat on this new version of the Battery Manager is the large red-backlight display that gives you all the information such as total runtime, actual voltage, average voltage, total energy, capacity and internal resistance.

Source: Spintec [spintec.nl]