Coming from Ultimate Racing are two new LiFe receiver battery packs. Available in flat or hump pack configuration the batteries are built from 2500mAh high-capacity cells and they offer a voltage of 6.6V which allows to use them with standard voltage receivers and servos. Both packs come pre-wired with universal-style receiver plugs and industry-standard balancer connectors.
View the hump battery pack here
KO Propo have introduced their new Electric Switch 3, an electronic on/off switch for nitro and gas-powered RC cars. The compact device measures 39.2×17.5×9.5mm and it weighs in at 10g. A two digit LC display allows to monitor the current and minimum receiver battery voltage and a LiPo protection mode ensures Lithium-Polymer-based batteries will not get deep discharged during operation. In addition the internal CPU will ensure maximum safety by preventing sudden connection looses due to voltage drops or overload. The translucent case ensures good visibility of all operation parameters and two mounting lashes make installation easy. The switch works with most transmitters and receivers and it is available from end of September.
View a list of the specifications and more images here
Muchmore have announced the release of their new 1800mAh 6.6V LiFe receiver battery pack. The hump-style pack is usable with all vehicles that require brick-type batteries with the Muchmore pack measuring 56x30x32mm and weighing in at 88.5g. The battery is usable with all standard voltage receivers and servos and it comes pre-wired with a universal receiver plug an JST-XH balancer connector.
Source: Muchmore [muchmoreracing.net]
Coming from MiniPro is a 2WD chassis version of their chassis dynamometer system. The device allows to measures the RPM, kV, voltage, current draw, power and torque output of vehicles up to 370mm wheelbase and 370mm width. This dyno is ideal for motor analysis, ESC and boost adjustment, brushless sensor adjustment, gearing calculation, tire selections, and much more. It is coupled with to a knurled roller via a pulley and belt to accelerate the inertial flywheel. The electronic board takes the flywheel’s inertia, measures the rate it takes to accelerate and calculates the output power and torque of the vehicle. The dyno repeatedly measures and calculates power in small increments to produce an accurate graph on a PC of the engine’s power characteristics. The vehicle is stopped onto the dyno with adjustable belt stripes, allowing to use a multitude of different chassis such as 1/10th formula, 1/10th and 1/12th pan cars. The dyno is available including or without flywheel unit and it us usable with MS Windows 7, 8 or 10 PC systems.
Source: MiniPro [minipro.com]
Motiv RC have introduced a set of aluminium can screws for the MC2 series of brushless motors. On top of weight savings, these screws will eliminate a portion of the eddy current brake or non working magnetic field on the motor. The screws are of 2.5mm thread and are 42mm in length. The three combine for only 1.5g in total weight which is less than half of their steel counterparts.
Source: Motiv RC [motivrc.com]
Xpress have introduced their new 30mm Windmill aluminium cooling fan for speed controllers. The machined alloy case will offer additional cooling surface for improved heat dissipation while looking the part due to extensive machining and silver edge details. The black colour wiring gives the fan a stealthy factory appearance and it is usable with virtually all speed controllers that use 30mm fan mounting patterns.
Source: Xpress [rc-xpress.com]
New from RC Maker is a simple and versatile carbon fibre charger and power supply stand. It features a slot together, compact footprint and is constructed from high quality 3mm carbon fibre. The stand itself is very sturdy, and made sturdier by holding the power supply underneath, which stabilises the whole unit. Increasing the room on your pit table, it also allows for more ventilation for the charger and power supply, allowing them to run cooler and more efficient. It sports two different width settings to house the smallest chargers – such as the iCharger X6 – right through to the bigger range of iChargers and other brands.
Coming from Motiv is their new PowerBrick 60, a 12VDC/60A power supply. The device is an in-house modified server supply unit and it features a new Motiv vinyl wrap and red guard. It is also an AutoRange unit, this means it is able to take input from 100VAC to 240VAC all around the world.
View a list of the specifications here
